Search results for "Heat Transfer"
showing 10 items of 442 documents
Heat-induced charge transfer in cobalt iron cyanide
2006
The heating of Co(2+) ferricyanide above 801C induces an inner charge transfer from Co(2+) towards Fe(III) to form the mixed valence system Co(2+)Co(III) ferri- ferro-cyanide. This charge transfer takes place preserving the material framework and forming a solid solution of the initial and final species. The cell edge of the cubic cell (Fm-3m) of this solid solution follows a regular variation with
Investigation of Effective Thermal Conductivity Aluminum Foams
2012
Abstract The study on the heat transfer mechanisms through the aluminium foam with a fluid in void cells of that foam was reported in this paper. Based on laboratory experiments, the effective thermal conductivity coefficient values were found for various type aluminum foams which had been filled up with a gas or a liquid. The significant effects were observed from porosity as well as from metal and fluid properties on the heat transfer capacity in a foam-fluid system. The convective heat transfer phenomenon was identified to occur in the foam cellular space. That phenomenon affected the effective thermal conductivity much more for liquid-filled foams than for gas-filled foams.
Pixel-oriented land use classification in energy balance modelling
2012
Mass and energy transfer between soil, vegetation and atmosphere is the process that allows to maintain an adequate energy and water balance in the earth–atmosphere system. However, the evaluation of the energy balance components, such as the net radiation and the sensible and latent heat fluxes, is characterized by significant uncertainties related to both the dynamic nature of heat transfer processes and surfaces heterogeneity. Therefore, a detailed land use classification and an accurate evaluation of vegetation spatial distribution are required for an accurate estimation of these variables. For this purpose, in the present article, a pixel-oriented supervised classification was applied …
Optimization of conducting structures by using the homogenization method
2002
Approximation and numerical realization of a class of optimization problems with control variables represented by coefficients of linear elliptic state equations is considered. Convergence analysis of well-posed problems is performed by using one- and two-level approximation strategies. The latter is utilized in an optimization layout problem for two conductive constituents, for which the necessary steps to transfer the well-posed problem into a computational form are described and some numerical experiments are given.
Correlation analysis of the power law parameters for viscosity of some engineering fluids
2017
Knowledge and estimation of transport properties of fluids which are sensitive to temperature variation like viscosity are necessary in mass flow and heat transfer computation. In the present work,...
Modelling heat transfer-controlled cooling and freezing times: a comparison between computational values and experimental results
2013
Modelling of heat transfer-controlled cooling and freezing time predictions are very important for a good preservation of foodstuffs. In that regard, we used a computer code based on the finite-element method that allowed us to analyse the phase-change of various foodstuffs during their freezing. The model was exercised to predict process times. The results can be used to design high efficiency plants. In this work, the results predicted by the FEM program are compared with the experimental values given in technical literature.
Integro-differential equation modelling heat transfer in conducting, radiating and semitransparent materials
1998
In this work we analyse a model for radiative heat transfer in materials that are conductive, grey and semitransparent. Such materials are for example glass, silicon, water and several gases. The most important feature of the model is the non-local interaction due to exchange of radiation. This, together with non-linearity arising from the well-known Stefan-Boltzmann law, makes the resulting heat equation non-monotone. By analysing the terms related to heat radiation we prove that the operator defining the problem is pseudomonotone. Hence, we can prove the existence of weak solution in the cases where coercivity can be obtained. In the general case, we prove the solvability of the system us…
Thermal conductivity of disperse insulation materials and their mixtures
2017
Development of new, more efficient thermal insulation materials is a key to reduction of heat losses and contribution to greenhouse gas emissions. Two innovative materials developed at Thermeko LLC are Izoprok and Izopearl. This research is devoted to experimental study of thermal insulation properties of both materials as well as their mixture. Results show that mixture of 40% Izoprok and 60% of Izopearl has lower thermal conductivity than pure materials. In this work, material thermal conductivity dependence temperature is also measured. Novel modelling approach is used to model spatial distribution of disperse insulation material. Computational fluid dynamics approach is also used to est…
Inverse prediction of local interface temperature during electromagnetic pulse welding via precipitate kinetics
2019
Abstract Interface temperature of electromagnetic pulse welding is difficult to measure by insitu methods. Here, the local temperature rise is investigated using the kinetics of precipitates and dispersoids (transformation or dissolution) at the interface zone (IZ) and affected zone (AZ) of three welds. This fine scale analysis allows estimating of local temperature range for AZ that reaches between 250 and 360 °C on both sides of narrow IZ, while the IZ itself experiences between 360 and 500 °C or even beyond 500 °C. The interface temperature increases with the increasing impact intensity. The current work estimated thermal field based on the precipitate transformations, which occur during…
Effect of plastic deformation on photoluminescence of ZnTe bulk monocrystals
1999
Abstract In this work ZnTe bulk single crystals have been deformed by axial compression with the aim of analyzing the luminescence properties related to intrinsic structural defects like dislocations. Plastic deformation greatly decreases the overall PL response, near-band-edge luminescence as well as deep level-related emissions. Results indicate a close relationship between the so-called Y1 and Y2 bands and the density of generated dislocations. Plastic deformation also produces an emission band at 603 nm whose intensity is proportional to the amount of introduced deformation.