Search results for "Heating"
showing 10 items of 248 documents
Post-warm-up muscle temperature maintenance: blood flow contribution and external heating optimisation
2015
Passive muscle heating has been shown to reduce the drop in post-warm-up muscle temperature (T m) by about 25 % over 30 min, with concomitant sprint/power performance improvements. We sought to determine the role of leg blood flow in this cooling and whether optimising the heating procedure would further benefit post-warm-up T m maintenance. Ten male cyclists completed 15-min sprint-based warm-up followed by 30 min recovery. Vastus lateralis T m (T mvl) was measured at deep-, mid- and superficial-depths before and after the warm-up, and after the recovery period (POST-REC). During the recovery period, participants wore water-perfused trousers heated to 43 °C (WPT43) with either whole leg he…
Suitability of some existing damage indexes for assessing agreements in maintenance and management of museum climatization systems
2020
Heating, Ventilating and Air-Conditioning systems in museums are called to properly control important microclimate parameters, not only for visitors’ wellbeing, but mostly for the preservation of works of art. Accordingly, in case of interruptions to Heating, Ventilating and Air-Conditioning systems, due to maintenance interventions or drawbacks, it is essential to guarantee the acceptable break from service to which possible damages for the works of art are related. In this regard, the aim of this work is to introduce a simple indicator to support curators in regulating the stipulation of contracts with external companies, a more effective management and maintenance of the Heating, V…
Thermal Decomposition and Combustion of Microwave Pre-Treated Biomass Pellets
2021
The objective of the study was to investigate a more effective use of commercially available biomass pellets (wheat straw, wood, peat) using microwave pretreatment to improve heat production. Pellets were pretreated using the originally designed microwave torrefaction device. The effects of microwave (mw) pretreatment were quantified, providing measurements of the weight loss and elemental composition of pellets and estimating the effect of mw pretreatment on their porosity, surface area and calorific values at pretreatment temperatures of T = 448–553 K. Obtained results show that the highest structural variations and elemental composition during mw pretreatment were obtained for wheat stra…
Comparing different processing methods in apple slice drying. Part 1. Performance of microwave, hot air and hybrid methods at constant temperatures
2019
The drying curves, energy efficiency and colour variations of sliced apples dried at various temperatures and using different techniques were evaluated, i.e. microwave (35, 55 and 65 °C), hot air (35, 55, 65 and 75 °C) and combination of both (65 °C). The microwave (MW) tests also included comparison between air recirculation and continuous inlet of fresh air. Each drying method was evaluated at a fixed temperature level by means of a control system based on infrared thermography. The time required to complete the drying process at 65 °C varied from about 44 min for MW with fresh air ventilation (double with air recirculation), to 122 min for hybrid heating and 238 min for hot air. Drying k…
Comparative study of the lubricant performance of Compritol 888 ATO either used by blending or by hot melt coating.
2003
Compritol 888 ATO is used as a lubricant in oral solid dosage formulations. It can also be used as a hot melt coating agent sprayed onto a powder. In this study, we compare the lubricant performance of Compritol 888 ATO either used by classical blending or by hot melt coating onto Lactopress by compression tests. In physical mix, the Compritol concentration does not affect the compressibility. The same compressibility is obtained with lactose coated by 0.5 or 1% of Compritol, but a higher compressibility can be observed with 2 and 3%. Cohesiveness of lactose depends on the process: hot melt coating induces a decrease of tablet tensile strength. In terms of forces transmission during compres…
Creation of Temperature Field in a Finite Cylinder by Alternated Electromagnetic Force
2004
One of the modern areas of applications developed during last years is effective use of electrical energy produced by alternating current in production of heat energy. This process is ecologically clean.The water is weakly electrically conducting medium (electrolyte). Devices based on this principle are developed during last ten years. Compared to classical devices with heating elements, new devices are more compact.
Rapid nanocrystallization of soft-magnetic amorphous alloys using microwave induction heating
2009
The crystallization of Fe73Nb3Cu1Si16B7 alloy during microwave heating was investigated in situ using synchrotron radiation powder diffraction. The phase transformation comprises a primary nanocrystallization stage and a final microcrystallization step. We provide evidence for a strong enhancement of the transformation kinetics. Microwave heating occurs as a result of both ohmic and magnetic losses induced by eddy currents, which defines a volumetric microwave induction heating process. Nanocrystallization is completed within 5 s, while full crystallization is achieved in less than 10 s.
Using Pulse Density Modulation to Improve the Efficiency of IGBT Inverters in Induction Heating Applications
2007
This paper analyses a high power (50 kW), high frequency (150 kHz) voltage fed inverter with a series resonant load circuit for industrial induction heating applications which is characterized by a full bridge inverter made with IGBT and the power control based on pulse density modulation (PDM). This power control strategy allows that the inverter works close to the resonance frequency for all output power levels. In this situation zero-voltage switching (ZVS) and zero-current switching (ZCS) conditions are performed and the switching losses are minimized. The results are verified experimentally using a prototype for induction hardening applications. A comparative study between the PDM and …
Series and parallel resonant inverters for induction heating under short-circuit conditions considering parasitic components
1999
Series and parallel resonant inverters are the common structures in high power industrial generators for induction heating applications. In practical working conditions, short-circuit of the heating coil is very common, normally producing overvoltages that can damage the power transistors of the inverter if no special precautions are taken. The aim of the paper is to show the mechanism of how overvoltages are generated under short-circuit conditions of the heating coil for series and parallel inverters.
Current-Induced Skyrmion Generation through Morphological Thermal Transitions in Chiral Ferromagnetic Heterostructures.
2018
© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Magnetic skyrmions promise breakthroughs in future memory and computing devices due to their inherent stability and small size. Their creation and current driven motion have been recently observed at room temperature, but the key mechanisms of their formation are not yet well-understood. Here it is shown that in heavy metal/ferromagnet heterostructures, pulsed currents can drive morphological transitions between labyrinth-like, stripe-like, and skyrmionic states. Using high-resolution X-ray microscopy, the spin texture evolution with temperature and magnetic field is imaged and it is demonstrated that with transient Joule heating, topologica…