Search results for "Humidity"
showing 10 items of 291 documents
Effect of Processing Conditions on the Degradation and on the Recycling of Polycarbonate
2003
Polycarbonate, like other polycondensation polymers, can be easily recycled without significant loss of properties only with careful drying. Indeed, the presence of humidity strongly decreases the molecular weight of the polymer by hydrolytic chain scission. In this paper, the degradation and the recycling of an extrusion grade polycarbonate sample has been investigated considering mainly the effect of the humidity. Some degradation is observed also for the material reprocessed in dry conditions and due to the thermomechanical stress acting on the melt. The chain scission is strongly reduced if the processing is carried out under nitrogen flow. In these conditions less degradation effects …
Recycling of dry and wet polyamide 6
2002
Recycling of polycondensation polymers can give rise to secondary materials with good mechanical properties only if a careful drying is carried out before the melt reprocessing operations. The presence of humidity provokes the hydrolytic chain scission of the macromolecules and the consequent decrease of molecular weight and properties. In this work, the drying step was substituted by the addition of an antioxidant that is able to protect the macromolecules because it is the autioxidant is more prone to hydrolysis, thus removing the water from the melt. The mechanical properties of polyamide 6 reprocessed more times in wet conditions and in the presence of this stabilizer are even better th…
Adsorption of water vapor by poly(styrenesulfonic acid), sodium salt: isothermal and isobaric adsorption equilibria
2004
Abstract Air conditioning and dehumidifying systems based on sorption on solids are of great interest, especially in humid climates, because they allow reduction of thermal loads and use of chlorofluorocarbons. Previous studies have shown that hydrophilic polymers such as sulfonic polymers can have very high performance in water adsorption from air. The aim of this study was to characterize the water vapor adsorption properties of fully sulfonated and monosulfonated poly(styrenesulfonic acid), sodium salt, and to elucidate the mechanism of adsorption on these materials. Adsorption isotherms have been determined by TGA between 298 and 317 K for pressures ranging from 0.1 to 45 hPa. They have…
Environment Humidity Effect on the Weight of Carbonized Na-Al-Si Glass Fabrics Recovery after Heating
2015
Na-Al-Si glass fabrics fibres contain Na+ ions that diffuse to its surface and along with CO2 and H2O from atmosphere create here the shell of carbonate hydrates. The heating of fabric leads to weight loss by evolving these substances. In this work the results of weight recovery study at room relative humidity (20% – 50%) and elevated humidity (near 70%) of fabrics after its heating at different temperatures (70°C – 150°C) are compared. The experiments shoved the different weight recovery kinetics. The initial exponential stages up to 0.3 h – 0.5 h of the both recoveries are associated with water absorption and differ by its levels. In a case of lower environment humidity the later weight i…
Methylcellulose-Based Edible Films and Coatings: 2. Mechanical and Thermal Properties as a Function of Plasticizer Content
1997
Several edible films based on methylcellulose and polyethylene glycol 400 (PEG400) were prepared and stored until equilibration at different relative humidities. Tensile stress−strain curves show very different behaviors as a function of PEG400 and relative humidity. Tensile strength strongly depends on relative humidity and then on water content, more than on PEG400 content. On the contrary, elongation is dependent both on water and PEG400. These differences correspond to the glass transition of the polymer, which affects the elongation more than the tensile strength. However, from DSC measurements, it appears that the PEG400 has no or a very low compatibility with the methylcellulose matr…
Characterization of monopolymer blend of virgin and recycled polyamide 6
2002
It is a common industrial practice to blend virgin polymer with the same recycled polymer coming from plastic scraps that, in general, has not undergone relevant degradation. In this work, the characteristics of blends of virgin and recycled polyamide have been considered by changing the amount of recycled polymer and the presence of humidity and a stabilizer. Neither dry nor wet stabilized recycled polyamide samples show significant variations of the molecular weight, but the melt Newtonian viscosity of the blends are slightly different from that predicted by an additive rule, despite the same chemical nature of the two components. This holds true even more for the humid unstabilized sampl…
EFFECT OF MOISTURE ON THE BULK PROPERTIES OF SALTED POLY(CAPROAMIDE).
1980
The glass-transition temperature (Tg) and the elastic modulus of nylon-6 and its mixtures with 4% w/w LiCl and with 2% LiCl+3% LiBr were investigated. In one set of experiments care was taken to avoid absorption of moisture during the measurements. In another set of experiments, samples were exposed to atmospheric humidity for different lengths of time. Both unoriented and oriented specimens were investigated. The presence of 4% LiCl almost doubles the amount of moisture absorbed at equilibrium by nylon-6. The Tg was found to be greatly affected by the moisture content and by salt type. When strict precautions to exclude moisture are taken, the addition of 4% LiCl raises the Tg of nylon-6 b…
Natural gas hydrates vs. induced dysfunctions in the hydrocarbon extraction process
2021
Cantoned fluids in porous-permeable or fractured media of reservoirs have acquired during the geological time special properties. The fluids from the reservoir could be or not a mixture of reservoir water, liquid hydrocarbons and gaseous hydrocarbons. Considering if inside of a reservoir there are two types of substances like natural gas and reservoir water which may be in the form of vaporous than the condition of saturation of gases with water vaporous is fulfilled. This process is taking place due to thermodynamic equilibrium resulting the so-called gas humidity. This state corroborated with a certain chemical composition plus favourable values of pressure and temperature may be decisive…
Temperature influence on moisture transfer through synthetic films
2000
Abstract Water transfer through films was investigated as a function of the temperature, the physical state of water and the relative humidity (RH) difference. The films were two synthetic packagings: a hydrophobic one, the polyethylene, a hydrophilic one, the cellophane. Some phenomena which could occur at low temperatures were discussed, such as polymer structure change due to mechanical relaxation or network plasticisation and modification of the penetrant diffusion at its melting temperature. But it seems that the comparison of water permeabilities (WPs) with temperature, especially at subzero temperatures, requires the correction of their calculation with the difference of water chemic…
A new equipment to measure the combined effect of humidity, temperature, mechanical stress and UV exposure on the creep behaviour of polymers
2008
To be able to study and predict the physical properties of a polymeric material under different environmental conditions is very important. Moisture, UV irradiation, thermal and mechanical stresses can dramatically change the characteristics of the material and hinder some specific applications. In this work, a new equipment able to perform creep tests under different environmental conditions (temperature, humidity, stress) is presented. Some preliminary results are also presented using a sample of polyamide 6. As this polymer is sensitive to all these variables, it is appropriate to verify the effectiveness of the new instrument.