Search results for "IMPIANTI"
showing 10 items of 797 documents
Prediction of flow fields in a dual-impeller stirred vessel
1999
Numerical simulations were connected for the flow field in a baffled tank stirred by a dual Rushton impeller. For this geometry, LDV measurements show a characteristic dependence of the flow patterns upon the position of the impellers. Two advanced modeling approaches were tested. In the first, the vessel was divided info two concentric blocks, coupled by, a sliding grin technique, and simulations were conducted in time-dependent mode. In the second approach, the vessel was modeled as two partially over-lapping I regions, the inner one rotating with the impeller and rite outer one stationary simulations were run in steady-state mode for each of the two regions, while information was iterati…
Coupling CFD with a one-dimensional model to predict the performance of reverse electrodialysis stacks
2017
Abstract Different computer-based simulation models, able to predict the performance of Reverse ElectroDialysis (RED) systems, are currently used to investigate the potentials of alternative designs, to orient experimental activities and to design/optimize prototypes. The simulation approach described here combines a one-dimensional modelling of a RED stack with a fully three-dimensional finite volume modelling of the electrolyte channels, either planar or equipped with different spacers or profiled membranes. An advanced three-dimensional code was used to provide correlations for the friction coefficient (based on 3-D solutions of the continuity and Navier-Stokes equations) and the Sherwoo…
CFD simulations of dense solid–liquid suspensions in baffled stirred tanks: Prediction of solid particle distribution
2013
Abstract Industrial tanks devoted to the mixing of solid particles into liquids are often operated at an impeller speed N less than Njs (defined as the lowest speed allowing the suspension of all particles): under such conditions the distribution of solid-particles is very far from being homogeneous and very significant concentration gradients exist. The present work is devoted to assessing the capability of Computational Fluid Dynamics (CFD) in predicting the particle distribution throughout the tank. The CFD model proposed by Tamburini et al. [58] and successfully applied to the prediction of the sediment amount and shape was adopted here to simulate the particle distribution under partia…
Development of a Membrane Distillation module for solar energy seawater desalination
2012
Abstract Membrane Distillation (MD) processes are gaining growing interest among novel desalination technologies, in particular for small scale applications also coupled with non-conventional energy sources. In the present work an original laboratory scale planar geometry Membrane Distillation unit was designed, built and tested for future coupling with solar energy. Though conceptually simple, the original geometry was developed in order to allow for multi-stage arrangement, compactness, internal heat recovery and possible integration with a polymeric heat exchanger for final brine heating by means of solar energy or waste heat. The laboratory scale unit was tested in order to investigate …
Oscillation dynamics of free vortex surface in uncovered unbaffled stirred vessels
2016
Abstract The main feature of unbaffled stirred tanks is the highly swirling liquid motion, which leads to the formation of a central vortex on the liquid free surface, when the vessel is operated without top-cover (Uncovered Unbaffled Stirred Tanks, UUST). One of the main drawbacks of such vessels, that limits their industrial applicability, is the possible onset of low-frequency sloshing of the free surface. In this work, original data on oscillation dynamics in UUST are presented. In particular, data focus on the oscillation amplitude as well as on their frequency. Data were obtained by means of a novel experimental technique based on digital image analysis. The effect of impeller geometr…
Engineering design and steady state thermomechanical analysis of the IFMIF European lithium target system
2013
In the framework of the current IFMIF Engineering Validation and Engineering Design Activities (IFMIF/EVEDA) phase, ENEA is responsible for the design of the European concept of the IFMIF lithium target system which foresees the possibility to periodically replace only the most irradiated and thus critical component (i.e., the backplate) while continuing to operate the rest of the target for a longer period (bayonet backplate concept). In this work, the results of the steady state thermomechanical analysis of the IFMIF EU target assembly are briefly reported highlighting the relevant indications obtained with respect to the fulfillment of the design requirements. © 2013 IEEE.
Modeling and simulation of dense cloud dispersion in urban areas by means of computational fluid dynamics
2011
Abstract The formation of toxic heavy clouds as a result of sudden accidental releases from mobile containers, such as road tankers or railway tank cars, may occur inside urban areas so the problem arises of their consequences evaluation. Due to the semi-confined nature of the dispersion site simplified models may often be inappropriate. As an alternative, computational fluid dynamics (CFD) has the potential to provide realistic simulations even for geometrically complex scenarios since the heavy gas dispersion process is described by basic conservation equations with a reduced number of approximations. In the present work a commercial general purpose CFD code (CFX 4.4 by Ansys®) is employe…
Particle distribution in dilute solid liquid unbaffled tanks via a novel laser sheet and image analysis based technique
2013
The availability of experimental information on particle distribution inside stirred tanks is a topic of great importance for many industrial applications such as catalysis and polymerization. The measurement of solid particle distribution is not simple and the development of suitable measuring techniques is still an open problem in chemical engineering research. In this work, a non-intrusive optical technique for measuring particle concentration fields in solid–liquid systems is discussed. The “Laser Sheet Image Analysis” (LSIA) technique described here makes use of a laser sheet, a digital camera for image acquisition and a suitable procedure for post-processing. It is able to provide sol…
Free-surface shape in unbaffled stirred vessels: Experimental study via digital image analysis
2013
There is a growing interest in using unbaffled stirred tanks for addressing a number of processing needs such as low shear damage (sensitive biocultures), low attrition (solid–liquid applications), deep-cleaning/sterilization (pharmaceutical applications). The main feature of uncovered, unbaffled stirred tanks is highly swirling motion of the fluid that results in a deformation of the free liquid surface. At sufficiently high agitation speeds the resulting whirlpool reaches the impeller and gives rise to a gas–liquid dispersion, so leading to the formation of a dispersion without the use of gas-sparger; the so-called self-inducing operation of the vessel. In this work, digital image analysi…
TRACE Code Analyses for the IAEA ICSP on “Integral PWR Design Natural Circulation Flow Stability and Thermo-Hydraulic Coupling of Containment and Pri…
2011
Considering the world energy demand increase in order to fulfill an environmental and economic sustainability, the energy policy of each country has to diversify the sources of energy and use stable, safe energy production option able of producing electricity in a clean way contributing in cutting the CO2 emission. In the framework of the sustainable development, today the use of advanced nuclear power plant, have an important role in the environmental and economic sustainability of country energy strategy. In the last 20 years, in fact, the international community, taking into account the operational experience of the nuclear reactors, starts the development of new advanced reactor designs…