Search results for "INTERFACE"
showing 10 items of 2139 documents
Role of top and bottom interfaces of a Pt/Co/AlOx system in Dzyaloshinskii-Moriya interaction, interface perpendicular magnetic anisotropy, and magne…
2017
We investigate the role of top and bottom interfaces in inversion symmetry-breaking Pt/Co/AlOx systems by inserting ultra-thin Cu layers. Wedge-type ultrathin Cu layers (0-0.5 nm) are introduced between Pt/Co or Co/AlOx interfaces. Interface sensitive physical quantities such as the interfacial Dzyaloshinskii-Moriya interaction (iDMI) energy density, the interfacial perpendicular magnetic anisotropy (iPMA), and the magneto-optical Kerr effects (MOKE) are systematically measured as a function of Cu-insertion layer thickness. We find that the Cu-insertion layer in the bottom interface (Pt/Co) plays a more important role in iDMI, PMA, and MOKE. In contrast, the top interface (Co/AlOx) noticeab…
Reconstructed bcc Co films on the surface
2007
Abstract Ultrathin epitaxial Co films on Cr ( 1 1 0 ) are examined by scanning tunneling microscopy and spectroscopy (STM and STS). At room temperature Co grows as pseudomorphic bcc layers for the first two monolayers and forms close-packed Co layers with stacking faults for thicker coverages. A periodic lattice distortion appears in two equivalent (3 × 1) reconstruction domains in combination with a regular lattice of dislocation lines oriented along the in-plane close-packed row directions bcc [ 1 1 ¯ 1 ] and bcc [ 1 ¯ 1 1 ] . The reconstruction and the occurrence of dislocation lines are caused by the epitaxial strain. The local density-of-states function is mapped by scanning tunneling …
Strain effects and phonon-plasmon coupled modes in Si-doped AlN
2009
The E 2h and A 1 (LO) phonon modes of AlN films grown on sapphire are analyzed by Raman scattering as a function of silicon doping for concentrations covering from 5.5 x 10 19 cm ―3 to 5.2 x 10 21 cm ―3 . For high doping levels the appearance of a mode around 520 cm ―1 indicates the precipitation of crystalline silicon in the samples and its inhomogeneous incorporation to the AlN layer. The frequency of this mode shifts to lower energies with doping, indicating that the silicon crystals are embedded in the AlN lattice and under tensile strain. On the other hand, the AlN phonon modes are blue-shifted due to the compressive strain as a result of the silicon incorporation. This strain is parti…
Dynamic response of thin-film semiconductors to AC voltage perturbations
2012
A theoretical treatment of a Schottky barrier dynamic response is developed on the basis of a general model of a semiconductor with thickness comparable in length to the space charge region width. It is shown that, when the space charge region approaches the metal/semiconductor interface, the electric field at this interface, induced by the charge accumulated on the metal, becomes significant with respect to the electric field induced by the charge accumulated on the semiconductor. Under this condition, the total capacitance of the Schottky barrier becomes independent of the polarization potential and tends to the value ε/L, like in a pure dielectric insulator. The term thin film is intende…
Finite element analysis of the out-of-plane behavior of FRP strengthened masonry panels
2017
Abstract In the present study a numerical model is proposed for the response of out-of-plane loaded calcarenite masonry walls strengthened with vertical CFRP strips applied on the substrate by means of epoxy resin. A simplified structural scheme is considered consisting in a beam fixed at one end, subjected to constant axial load and out-of-plane lateral force monotonically increasing. Two different constraint conditions are taken into account: in the first one, the panel is assumed free to rotate at the top end while, in the second one, the rotation is restrained. Three-dimensional finite elements are used for the calcarenite parts and an equivalent constitutive law available in the litera…
Synthesis of Multifunctional Inorganic Materials
2018
Abstract Both, novel and older widely and routinely used methods of chemical synthesis fornew multifunctional inorganic (nano) materials with different sizes and morphologies are reviewed and summarized in this chapter. Illustrative examples of micro- and nanoparticle preparations are provided regarding different applications: renewable and sustainable energy harvesting, water splitting and hydrogen generation, fuel and solar cell devices, luminescent materials for white light–emitting diodes and clean environment. We give our perspective on the current status of the topic: methods of colloidal chemistry, coprecipitation, reverse-micelle technique, sol–gel, spray pyrolysis, microwave-assist…
Formulation of a truss element for modelling the tensile response of FRCM strips
2022
Modelling the tensile behaviour of Fabric Reinforced Cementitious Matrix (FRCM) is not a straightforward task due to the inner complexity of the mechanics of this kind of composite materials. In fact, after that the matrix is cracked, the compatibility between the fibre and the surrounding mortar is lost and the system behaves as two separate elements connected by a brittle interface. For this reason, several research studies proposed computational approaches for evaluating the tensile behaviour of FRCM composites, usually referring to brick-based 3D Finite Element Models (FEM) or to complex numerical procedures. This paper shows the formulation of a simplified coupled truss element for mod…
Experimental investigation of the influence of adhesion on the frictional conditions in the cutting process
1999
Abstract This paper presents the results of an experimental study on the influence of adhesion on the tribological characteristics of the tool-chip interface. It was established that under orthogonal cutting conditions both the high interface temperature and severe plastic deformation result in relatively strong adhesion between steel and uncoated carbide. In particular, the molecular–mechanical theory of friction was applied to estimate the shear strength of the local adhesive junction, and to divided the rake face friction into two terms—an adhesion term (the interfacial coefficient of friction) and the deformation term. It should be pointed out that the data obtained provide a new approa…
Study and evaluation of fretting critical slip conditions by applying the design of experiments method
2006
Tribological systems are complex systems that require a multi-disciplinary (mechanical, material, physico-chemical) approach where numerous influence factors can be involved. To characterize a contact couple, the intrinsic parameters of the materials as well as the parameters related to the contact loading and the surrounding environment need to be taken into account. Fretting analysis, by means of running condition-fretting maps (RCFM), allows the behavior of the contact couple to be taken into account and to predict the boundary between partial slip and gross slip conditions. This article presents the study of a steel/polycarbonate couple during fretting tests. The study was carried out b…
The influence of Al doping on the photocatalytic activity of nanostructured ZnO: The role of adsorbed water
2018
Abstract Al doped ZnO nanoparticles (labeled as x% A-ZnO, x = 0.0, 0.5, 1.0, and 1.5) were synthesized by a simple sol-gel method, characterized and tested as photocatalysts for the degradation of a model compound under UV-light irradiation. Diffuse reflectance spectroscopy (DRS) and photoelectrochemical analysis have been performed to evidence their optical and electronic behavior. The structural features of the powders were highlighted by means of specific surface area (SSA) analysis, X-ray diffraction (XRD), Fourier-transform infrared (FTIR) and Raman spectroscopy. Al doping results in enhanced photocatalytic activity of the modified powders with respect to pure ZnO. In particular, the h…