Search results for "IPM"

ESCA-Analysis of tin compounds on the surface of hydroxyapatite

1997

The formation of tin compounds on the surface of hydroxyapatite, the main crystalline component of teeth, is discussed controversially. SnF2 is used as an anticaries agent in toothpaste preparations. Pure hydroxyapatite (HAP) is treated with extracts of commercially available toothpastes containing tin fluoride and analyzed by electron spectroscopy (ESCA). Survey spectra and depth profiles are recorded. The chemical shifts measured for the HAP samples are compared with those of standard tin compounds. It is concluded that on the surface of hydroxyapatite a mixture of two-valent fluoro-phosphato compounds is formed. SnO is not found in the mixture.

Controlling the mode of operation of organic transistors through side chain engineering

2016

Electrolyte-gated organic transistors offer low bias operation facilitated by direct contact of the transistor channel with an electrolyte. Their operation mode is generally defined by the dimensionality of charge transport, where a field-effect transistor allows for electrostatic charge accumulation at the electrolyte/semiconductor interface, whereas an organic electrochemical transistor (OECT) facilitates penetration of ions into the bulk of the channel, considered a slow process, leading to volumetric doping and electronic transport. Conducting polymer OECTs allow for fast switching and high currents through incorporation of excess, hygroscopic ionic phases, but operate in depletion mode…

Thermo-optic control of dielectric-loaded plasmonic waveguide components

2010

International audience; We report preliminary results on the development of compact (length 20%) is demonstrated with MZI-and WRR-based components, and efficient (similar to 30%) rerouting is achieved with DC switches. (C) 2010 Optical Society of America

Dynamic doping in bright and stable light emitting electrochemical cells.

2013

By using fast current density and luminance versus voltage (JL-V) analysis the device operation of sandwiched light emitting electrochemical cells (LECs) during their normal voltage driving operation mode is studied. In LECs the application of a voltage results in the movement of ions changing the state of the device, as a result the JL-V scans need to be performed fast and meet certain conditions to be meaningful. Space-charge limited current behavior is observed once the injection barriers are overcome. The increase of the current density after this point imply that the effective thickness of the devices is reduced which indicates the formation of more conductive regions adjacent to the e…

Multi-gigahertz repetition-rate-selectable passive harmonic mode locking of a fiber laser

2013

We demonstrate a passive harmonically mode-locked erbium-doped fiber laser that operates at selectable harmonics spanning from the 6th to the 928th, which corresponds to repetition rates ranging from 153 MHz to 22.2 GHz. The noteworthy laser output stability is attested by supermode suppression levels as large as 41 dB. The influence of a continuous wave background on harmonics stability is tested.

Calibration of a thermoluminescent dosimeter worn over lead aprons in fluoroscopy guided procedures

2018

Fluoroscopy guided interventional procedures provide remarkable benefits to patients. However, medical staff working near the scattered radiation field may be exposed to high cumulative equivalent doses, thus requiring shielding devices such as lead aprons and thyroid collars. In this situation, it remains an acceptable practice to derive equivalent doses to the eye lenses or other unprotected soft tissues with a dosimeter placed above these protective devices. Nevertheless, the radiation backscattered by the lead shield differs from that generated during dosimeter calibration with a water phantom. In this study, a passive personal thermoluminescent dosimeter (TLD) was modelled by means of …

Electrochemical Behaviour and Galvanic Effects of Titanium Implants Coupled to Metallic Suprastructures in Artificial Saliva

2018

The aim of the present study is to analyze the electrochemical behavior of five different dental alloys: two cobalt-chromium alloys (CoCr and CoCr-c), one nickel-chromium-titanium alloy (NiCrTi), one gold-palladium alloy (Au), and one titanium alloy (Ti6Al4V), and the galvanic effect when they are coupled to titanium implants (TiG2). It was carried out by electrochemical techniques (open circuit measurements, potentiodynamic curves and Zero-Resistance Ammetry) in artificial saliva (AS), with and without fluorides in different acidic conditions. The studied alloys are spontaneously passivated, but NiCrTi alloy has a very narrow passive domain and losses its passivity in presence of fluorides…

Periodic unmixing of a binary metallic vapor

2005

We report on a type of surface structuring after short pulse laser ablation of a binary alloy. We observe the emergence of a concentric ring structure with changing elemental composition. The composition changes are interpreted by condensation of the ambient ablation vapor due to stress wave excitations in the ablation spot.

Hockey-Puck micelles from oligo(p-benzamide)-b-PEG rod-coil block copolymers.

2006

Direct optical measurement of light coupling into planar waveguide by plasmonic nanoparticles

2012

Coupling of light into a thin layer of high refractive index material by plasmonic nanoparticles has been widely studied for application in photovoltaic devices, such as thin-film solar cells. In numerous studies this coupling has been investigated through measurement of e.g. quantum efficiency or photocurrent enhancement. Here we present a direct optical measurement of light coupling into a waveguide by plasmonic nanoparticles. We investigate the coupling efficiency into the guided modes within the waveguide by illuminating the surface of a sample, consisting of a glass slide coated with a high refractive index planar waveguide and plasmonic nanoparticles, while directly measuring the inte…