Search results for "Icon"
showing 10 items of 3539 documents
Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents.
2007
Abstract Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modif…
The use of anthracene as a model compound in a comparative study of hydrous pyrolysis methods for industrial waste remediation
2011
Author's version of an article published in Chemosphere, 84 (4), 403-408. Also available from the publisher: http://dx.doi.org/10.1016/j.chemosphere.2011.03.061 Polycyclic aromatic hydrocarbons are very stable compounds and tend to bioaccumulate in the environment due to their high degree of conjugation and aromaticity. Hydrous pyrolysis is explored as a technique for the treatment of industrial water containing PAH, using anthracene as a model compound. The reactivity of anthracene under a range of temperatures and durations are studied in this paper. Aliquots of 1.0-10.0mg of anthracene in a range of 1.0-5.0 mL of H(2)O are subjected to hydrous pyrolysis under varied conditions of tempera…
Geochemical characterisation of the thermo-mineral waters of Greece
2021
AbstractGeothermal areas of Greece are located in regions affected by recent volcanism and in continental basins characterised by elevated heat flow. Many of them are found along the coast, and thus, water is often saline due to marine intrusion. In the current study, we present about 300 unpublished and literature data from thermal and cold mineral waters collected along Greece. Samples were analysed for major ions, Li, SiO2 and isotopes in water. Measured temperatures range from 6.5 to 98 °C, pH from 1.96 to 11.98, while Total Dissolved Solutes (TDS) from 0.22 to 51 g/L. Waters were subdivided into four main groups: (1) thermal; (2) cold; (3) acidic (pH < 5); and (4) hyperalkaline (pH …
Biotrickling filter modeling for styrene abatement. Part 2: Simulating a two-phase partitioning bioreactor.
2017
Abstract A dynamic model describing styrene abatement was developed for a two-phase partitioning bioreactor operated as a biotrickling filter (TPPB-BTF). The model was built as a coupled set of two different systems of partial differential equations depending on whether an irrigation or a non-irrigation period was simulated. The maximum growth rate was previously calibrated from a conventional BTF treating styrene (Part 1). The model was extended to simulate the TPPB-BTF based on the hypothesis that the main change associated with the non-aqueous phase is the modification of the pollutant properties in the liquid phase. The three phases considered were gas, a water–silicone liquid mixture, …
New silica based adsorbent material from rice straw and its in-flow application to nitrate reduction in waters: Process sustainability and scale-up p…
2021
Abstract This paper shows a particular example to move to a sustainable circular economical process from valorization of rice straw ashes by developing a green synthesis for obtaining a useful sub-product. This strategy can palliate negative effects of the agriculture waste practices on the environment and also the obtained silica reduced nitrate content in waters. It is demonstrated that the silica synthesis developed at lab was scalable more than a hundred times with good results. Adsorption studies of nitrate in standards and real well waters at lab scale and scaling-up provided similar results. Adsorption values near to 15 mg/g for nitrate standards and 8.5 mg/g for well water were obta…
Photocatalytic activity of TiO2/SiO2 systems
2009
Silica-supported TiO(2) powders were synthesized by a wet method under mild conditions. The aim of the work was the preparation of TiO(2)/SiO(2) additives for photocatalytic cements. Three types of commercial SiO(2) were used as supports: Cabot, Axim and Fly Ash. Cabot silica was ultra-pure whereas the other two silica contained different percentages of various oxides. The TiO(2)/SiO(2) samples, denoted TiO(2)/Cabot, TiO(2)/Axim and TiO(2)/Fly Ash, were prepared by boiling suspensions obtained by addition of silica to a solution of TiCl(4) in water (volume ratio 1:10). The photocatalytic activity was evaluated in a gas-solid system both in batch and in continuous reactors using 2-propanol a…
Investigation of amorphous oxide film-electrolyte junctions by AC techniques
1992
Current AC (alternating current) techniques are used often to characterize the energetics at a semiconducting solid phase/electrolyte interface. For thin layers having a strongly disordered or amorphous structure (such as oxide-passive layers anodically grown on valve metals), interpretative models currently used for crystalline semiconductors may produce misleading data. A new interpretation of the admittance data, based on recent models for amorphous semiconductors (a-Sc) Schottky barriers, is presented for passive films of Nb, W and Ti. The physical bases of the model are presented as well as its advantages and disadvantages. The new theory views the solid/electrolyte interface more sati…
Design, characterization and comparison of materials based on β and γ cyclodextrin covalently connected to microporous silica for environmental analy…
2018
Abstract Determination of organic pollutants in environmental samples presents great difficulties due to the lack of sensitivity and selectivity in many of the existing analytical methods. In this work, the efficiency of materials based on silica structures containing bounded γ-cyclodextrin has been evaluated to determinate phenolic compounds and polycyclic aromatic hydrocarbons in air and water samples, respectively, in comparison with materials made of β-cyclodextrin. According to the results obtained for the material characterization, the new γ-cyclodextrin solid phase does not apparently present any porosity when used in air samples, but it has been shown to work efficiently for the pre…
Self-healing, an intrinsic property of biomineralization processes
2013
The sponge siliceous spicules are formed enzymatically via silicatein, in contrast to other siliceous biominerals. Originally, silicatein had been described as a major structural protein of the spicules that has the property to allow a specific deposition of silica onto their surface. More recently, it had been unequivocally demonstrated that silicatein displays a genuine enzyme activity, initiating and maintaining silica biopolycondensation at low precursor concentrations (<2 mM). Even more, as silicatein becomes embedded into the biosilica polymer, formed by the enzyme, it retains its functionality to enable a controlled biosilica deposition. The protection of silicatein through the biosi…
El monumento a Cervantes en Valencia obra de Mariano Benlliure
2005
El Monumento a Cervantes erigido en Valencia tuvo su origen en la conmemoración del III Centenario de la publicación de El Quijote. La obra escultórica creada por Mariano Benlliure constituye un doble homenaje al genial escritor y al inmortal personaje, y una simbiosis formal de realismo e impresionismo. Al cumplirse el IV Centenario rememoramos aquel homenaje y sus vicisitudes y señalamos algunas de las diferentes representaciones escultóricas inspiradas en la figura del escritor y su obra en el transcurso de estos cien años. (A)