Search results for "Ignition"
showing 10 items of 50 documents
A New Simple Friction Model for S. I. Engine
2009
Internal combustion engine modeling is nowadays a widely employed tool for modern engine development. Zero and mono dimensional models of the intake and exhaust systems, combined with multi-zone combustion models, proved to be reliable enough for the accurate evaluation of in-cylinder pressure, which in turn allow the estimation of the engine performance in terms of indicated mean effective pressure (IMEP). In order to evaluate the net engine output, both the torque dissipation due to friction and the energy drawn by accessories must be taken into consideration, hence a model for the friction mean effective pressure (FMEP) evaluation is needed. One of the most used models accounts for engin…
Knock Resistance Increase through the Addition of Natural Gas or LPG to Gasoline: An Experimental Study
2013
Bi-fuel spark ignition engines, nowadays widely spread, are usually equipped with two independent injection systems, in order run the engine either with gasoline or with gaseous fuel, which can be Natural Gas (NG) or Liquefied Petroleum Gas (LPG). These gases, besides lower cost and environmental impact, are also characterized by a higher knock resistance with respect to gasoline that allows to adopt a stoichiometric proportion with air also at full load. Gasoline, on the other hand, being injected as liquid, maintains higher volumetric efficiency and hence higher power output. As a compromise solution, it could be desired to exploit the advantages of both gasoline and gas (NG or LPG), thus…
Performance Prevision of a Turbocharged Natural Gas Fuelled S.I. Engine
2008
Natural gas represents today maybe the most valid alternative to conventional fuels for road vehicles propulsion. The main constituent of natural gas, methane, is characterized by a high autoignition temperature, which makes the fuel highly resistant to knocking: this allows a considerable downsizing of the engine by means of supercharging even under high compression ratio. Starting from these considerations, the authors realized a thermodynamic model of a 4-cilynder s.i. engine for the prevision of in-cylinder pressure, employing a two-zone approach for the combustion and adding sub-models to account for gas properties change and knocking occurrence. An extensive experimental campaign has …
Detailed Combustion Analysis of a Supercharged Double-Fueled Spark Ignition Engine
2021
The main goal of researches in the field of automotive engineering is to obtain a large-scale implementation of low- or zero-emissions vehicles in order to substantially reduce air pollution in urban areas. A fundamental step toward this green transition is represented by the improvement of current internal combustion (IC) engines in terms of fuel economy and pollutant emissions. The spark ignition (SI) engines of modern light-duty vehicles are supercharged, down-sized, and equipped with direct injection. Gaseous fuels, such as liquefied petroleum gas (LPG) or natural gas (NG), proved to be a valid alternative to gasoline in order to reduce pollutant emissions and increase fuel economy. In …
Performances and Emissions Improvement of an S.I. Engine Fuelled by LPG/Gasoline Mixtures
2010
As is known gaseous fuels, such as Liquefied Petroleum Gas (LPG) and Natural Gas (NG), thanks to their good mixing capabilities, allow complete and cleaner combustion than normal gasoline, resulting in lower pollutant emissions and particulate matter. Some of the automobile producers already put on the market “bi-fuel” engines, which may be fed either with standard gasoline or with LPG. These engines, endowed of two separate injection systems, are originally designed for gasoline operation; hence they do not fully exploit the good qualities of LPG, such as its better knocking resistance, which would allow higher compression ratios. Moreover, when running with gasoline at medium high loads, …
Efficiency advantages of the separated electric compound propulsion system for CNG hybrid vehicles
2021
As is widely known, internal combustion engines are not able to complete the expansion process of the gas inside the cylinder, causing theoretical energy losses in the order of 20%. Several systems and methods have been proposed and implemented to recover the unexpanded gas energy, such as turbocharging, which partially exploits this energy to compress the fresh intake charge, or turbo-mechanical and turbo-electrical compounding, where the amount of unexpanded gas energy not used by the compressor is dedicated to propulsion or is transformed into electric energy. In all of these cases, however, maximum efficiency improvements between 4% and 9% have been achieved. In this work, the authors d…
Experimental model-based linearization of a S.I. engine gas injector flow chart:
2014
Experimental tests previously executed by the authors on the simultaneous combustion of gasoline and gaseous fuel in a spark ignition engine revealed the presence of strong nonlinearities in the lower part of the gas injector flow chart. These nonlinearities arise via the injector outflow area variation caused by the needle impacts and bounces during the transient phenomena that take place in the opening and closing phases of the injector and may seriously compromise the air-fuel mixture quality control for the lower injection times, thus increasing both fuel consumption and pollutant emissions. Despite the extensive literature about the operation and modelling of fuel injectors, there are …
An experimental investigation on the long-term compatibility of preheated crude palm oil in a large compression ignition diesel engine
2018
An experimental study was carried out on a large stationary compression ignition engine to evaluate the long-term compatibility and durability issues associated with the use of crude palm oil as fuel. Two different preheating temperatures (60 and 80 °C) were adopted to assess the potential improvements related to lower fuel viscosity. The results obtained, in terms of in-cylinder carbon deposits and engine wear, were compared with the results obtained using ordinary diesel fuel. For each fuel and preheating temperature, the engine was operated for 300 consecutive h, during which several engine lubricant samples were collected and analysed to determine soot and fuel contaminations, viscosity…
Vaporization and autoignition characteristics of ethanol and 1-propanol droplets : influence of water
2013
Detailed investigation of the vaporization of an isolated of ethanol and 1-propanol droplet was carried out in this experimental study. The experimental set-up consists of a heated chamber with a cross quartz fibers configuration as droplet support. An alcohol droplet is located at the intersection of the cross quartz fibre with a controlled initial diameter (300-600µm). Ambient temperature is varied from 298 to 973K at atmospheric pressure. The quasi-steady theory has been used to compare and to explain all experimental results. The real impact of the water concentration on the vaporization rate of an ethanol droplet is also examined, where two ‘quasi-steady’ periods are observed on the d2…
Performance and combustion analysis of a supercharged double-fuel spark ignition engine
2019
In order to increase fuel economy and reduce pollutant emissions in the last decades light duty spark ignition (SI) engines have become smaller, supercharged and equipped with direct injection. A suitable alternative to oil derived fuel is represented by gaseous fuels, such as Natural Gas (NG) and Liquefied Petroleum Gas (LPG), whose higher knock resistance and better mixing capabilities substantially improve vehicle fuel economy and pollutant emissions. The simultaneous combustion of gasoline and gaseous fuel (Double-Fuel operation, DF) in a naturally aspirated SI engine has already been investigated in the past also by the same authors, proving remarkable results in terms of engine effici…