Search results for "Impurity"
showing 10 items of 330 documents
EPR characterization of erbium in glasses and glass ceramics
2020
Electron paramagnetic resonance (EPR) is a well-established spectroscopic technique for electronic structure characterization of rare-earth ion impurities in crystalline and amorphous hosts. EPR spectra of erbium-doped glass matrices and nanocomposites can provide information about local structure variations induced by changes in chemical composition or crystallization processes. Characterization possibilities of Er3+ ions in glasses and glass ceramics including direct EPR measurements, indirect investigations via secondary paramagnetic probes, and optically detected magnetic resonance techniques are considered in this article. ----/ / /---- This is the pre-print of the following article: A…
Photochemical stabilization of linear low-density polyethylene/clay nanocomposites: Towards durable nanocomposites
2008
International audience; This article reports a study of the chemical modifications of LLDPE/nanoblend nanocomposites exposed to UV light in conditions of artificially accelerated ageing and natural weathering. Analysis by infrared spectroscopy of the chemical modifications produced by photoageing shows that the presence of an organo-clay leads to the decrease of the oxidation induction time of the polymer (LLDPE), which results in lower durability of the nanocomposites. Protection against photooxidation was tested with different kinds of UV stabilizers and with a metal deactivator. It is shown that the metal deactivator is very efficient in stabilizing the nanocomposite since it totally can…
Defect Calculations for Yttrium Aluminum Perovskite and Garnet Crystals
2000
Native and impurity point defects in both Yttrium Aluminum Perovskite and Garnet crystals are studied in the framework of the pair-potential and the shell model approximations. The calculated formation energies for native defects suggest that the antisite disorder is preferred over the Frenkel and Schottky-like disorder in both YAP and YAG. In non-stoichiometric compounds, the calculated reaction energies indicate that excess of Y2O3 or Al2O3 is, most likely, to be accommodated by the formation of antisites rather than vacancies or interstitials in the lattice. Enthalpies of the reactions for impurity (Ca2+, Mg2+, Sr2+, Ba2+, Cr3+, Fe3+, Nd3+, Si4+) incorporation into both YAP and YAG latti…
Room-temperature plasma-enhanced atomic layer deposition of ZnO: Film growth dependence on the PEALD reactor configuration
2017
Room-temperature plasma-enhanced atomic layer deposition (PEALD) of ZnO was studied by depositing the films using diethylzinc and O2 plasma from inductively-coupled plasma (ICP) and capacitively-coupled plasma (CCP) plasma source configurations. The CCP-PEALD was operated using both remote and direct plasma. It was observed that the films deposited by means of remote ICP and CCP were all highly oxygen rich, independently on plasma operation parameters, but impurity (H, C) contents could be reduced by increasing plasma pulse time and applied power. With the direct CCP-PEALD the film composition was closer to stoichiometric, and film crystallinity was enhanced. The ZnO film growth was observe…
Improving the material quality of silicon ingots by aluminum gettering during crystal growth
2016
We present a method for the purification of silicon ingots during the crystallization process that reduces significantly the width of the low charge carrier lifetime region at the ingot top. The back-diffusion of impurities from the ingot top is suppressed by adding a small amount of pure aluminum into the silicon melt right at the end of the solidification. We study the aluminum gettering effect by instrumental neutron activation analysis (INAA) and Fei imaging. Furthermore, we present a model for aluminum gettering of Fe in the silicon ingot that is in agreement with literature data for aluminum gettering at lower temperature. The distribution of iron in the ingots with and without alumin…
On the Theory of Domain Structure of Disordered Ferroelectrics
2009
We present a comprehensive analysis of domain structure formation in ferroelectric phase of incipient ferroelectrics with off-center dipole impurities like KTaO 3 :Li, Nb,Na. Our analysis is carried out on the base of effective free energy of disordered ferroelectrics, derived by us earlier. This free energy permits to apply the standard approach to domain structure calculation. Using coupled system of Maxwell equations with those obtained by minimization of above free energy, we calculate the physical characteristics of domain structure as functions of impurity dipoles concentration n. Our theory can be easily generalized for arbitrary temperature and crystal shape including thin films.
Electronic Properties of Point Defects in Metals
1982
Recent progress in electronic structure and related properties of point defects in metals is reviewed. Topics discussed include transition metal impurities in a non-magnetic host, construction of potential energy surfaces from effective-medium theories, trapping of light interstitials, and pair potential in metals.
Physical chemistry of the powder metallurgy of beryllium: Chemical characterization of the powder in relation to its granularity
1996
Combining the systematic quantitative chemical analysis of the light impurities H, C, N, and O, the quantitative thermal desorption of molecular H2O and H2, and X ray diffractometry of various size fractions of a commercial Be powder (SP-65 grade from Brush-Wellman) allowed the precise de-termination of the mean composition and equivalent mean thickness of the surface impurity phases in the passivation-contamination layer on the surface of the particles. The overall surface stoichi-ometry is as follows: 0.2 BeOcrystallized, 0.8 [BeO - 0.59 H2O]amorphous, 0.14 H2Oads The result of the elemental analysis by X-ray photoelectron spectroscopy of the unetched surface of a powder pellet is compare…
The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites
2015
Abstract In this work, kenaf fibers were pre-treated in a NaOH solution (6% in weight) at room temperature for two different periods (48 and 144 h). The chemical treatment of kenaf fibers for 48 h allowed to clean their surface removing each impurity whereas 144 h of immersion time had detrimental effect on the fibers surface and, consequently, on their mechanical properties. Untreated and NaOH treated kenaf fibers (i.e. for 48 h) were also used as reinforcing agent of epoxy resin composites. The effect of the stacking sequence (i.e. using unidirectional long fibers or randomly oriented short fibers) and the chemical treatment on the static mechanical properties was evaluated showing that t…
Luminescence of ferroelectric crystals: LiNbO3and KNbO3
2000
Abstract The thermostimulated luminescence and time-resolved luminescence of LiNbO3 (congruent, stoichiometric, Eu−, Mn−, or Cr−doped) and KNbO3 crystals (undoped, Fe−, or Mn− doped) excited by X-ray, pulsed nitrogen laser or pulsed electron beam were studied. The luminescence decay times of niobium-oxygen groups (regular or perturbed by defect or impurity) were obtained. It is shown that the energy transfer from bulk to the activator in LiNbO3 is not effective during the electron-hole recombination process.