Search results for "Indentation hardness"
showing 10 items of 93 documents
Hardening of Steel Perforated Tape by Nd:YAG Laser
2016
One of the directions of application of the perforated metal material is their use as cutting elements in the production of processing tools. In this case it is necessary to carry out hardening of cutting surfaces to increase their hardness. One of the methods of hardening metals could be laser treatment. Therefore, the present work is a study of the effect of Nd:YAG laser radiation on the microstructure and hardness of fragments formed from steel perforated tape. Different laser scan speeds (doses) were used in the experiments. The results have shown that the increase the microhardness of 30-40% after the laser treatment of steel perforated tape in the surface layer in a depth range up to …
The Annealing Behavior of the Subsurface Zone Induced by Friction in Bismuth Detected by Positron Lifetime Technique
2013
The annealing behavior of the subsurface zone (SZ) in pure bismuth induced by dry sliding was studied using the positron lifetime measurement. This measurement allows us to detect the SZ and its recovery, and recrystallization processes. The comparative measurements of the sample exposed to compression revealed the thermal stability of the SZ. The compressed sample rebuilt its structure due to the recovery and recrystallization processes at the temperature of 60 °C, whereas the sample exposed to dry sliding does it at higher temperature of 260 °C, which is close to the melting point. The isothermal annealing at the temperature of 100 °C confirmed these results. The defect depth profile indu…
Peculiarities of Forming of Magnetic Hardening in Sintered Nd15Fe76.2Ti1.0Al0.8B7 Permanent Magnet by Ageing
1999
Variations of the intrinsic coercivity ( i H c ) with ageing (at 293 to 1173 K for 0.45 to 57.6 ks) of sintered Nd 15 Fe 76.2 Ti 1.0 Al 0.8 B 7 have been investigated. The tests indicated minimum and maximum of intrinsic coercivity ( i H min c and i H max c ) at temperatures 725 K and 1025 K, respectively. The observed behaviour of i H c has been compared with microhardness measurements and microstructure observations (SEM, EDAX, domain structure (DS) and room temperature Mossbauer spectroscopy). SEM and DS investigations gave hints to a change in microstructure. Fitting of the Mossbauer spectra of permanent magnets for different i H c has shown that the magnetic hyperfine field Bhf of 8j2 …
The formation of intermetallics in dissimilar Ti6Al4V/copper/AISI 316 L electron beam and Nd:YAG laser joints
2011
Abstract The welds of titanium alloys with steels suffer from the brittleness of resulting intermetallic compounds. In present study, we report the feasibility of Ti6Al4V to stainless steel AISI 316L welding through pure copper interlayer carried out by electron beam and pulsed Nd:YAG laser. The nature and the localization of intermetallic phases in these welds have been studied by SEM, EDS, XRD and microhardness measurements. The simplified scenario of weld formation has been proposed in order to understand the mechanism of weld formation and to explain the way local phase content determines the mechanical properties. It can be concluded that the insertion of 500 μm pure copper interlayer …
Mechanical and microstructural characterization of friction stir welded skin and stringer joints
2013
A microstructural and mechanical investigation on lap joints welded by friction stir welding and made out of a 7075-T6 stringer and a 2024-T4 skin is presented. In particular, the metallurgical and mechanical properties of joints have been studied at different tool feed rates (V = 35, 50, 100 mm/min) and constant rotation speed (R = 500 r/min). Temperature distributions have been monitored during the process. It is found that in the welded area, the recrystallized zone (nugget) has an average grain size of about 3 µm and exhibits coarsened MgZn2 particles on grain boundaries. The maximum values of microhardness in the welded skin increase with the process temperature, while they just sligh…
Mechanical properties and corrosion behaviour of low carbon martensitic stainless steel after machining
2014
The influence of different combinations of cutting conditions on the mechanical behaviour (microhardness), the microstructure and the corrosion behaviour in NaCl solution (using the electrochemical microcell technique and pulse potentiodynamic testing) of a low carbon martensitic stainless steel (grade X4CrNiMo16.5.1 stainless steel) after tempering treatment was studied. Microhardness was increased on the machined surface. In addition, the electrochemical experiments have shown that the machined materials have a heterogeneous electrochemical behaviour. Significant effect of machining on pitting corrosion was noticed. The pitting potential was found to decrease as the microhardness increase…
FSW of AA2139-T8 Butt joints for aeronautical applications
2011
The effect of process parameters on mechanical and microstructural properties of AA 2139 T8 joints produced by friction stir welding (FSW) was analysed by means of statistical tools. Three different parameters were taken into account: angular speed ( ω), welding speed ( va), and plunging depth ( p); each of them was varied on three levels. Forces and temperatures achieved during the welding were monitored and analysed for all joints. An accurate microstructural analysis was performed: the occurrence of some remarkable defects, typical of FSW, such as tunnel or lack of penetration, was related to actual process parameters adopted. The extension of each FSW characteristic zone was measured a…
Solid state bonding mechanics in extrusion and FSW: Experimental tests and numerical analyses
2007
In the paper the authors compare the different solid state bonding mechanics for both the processes of hollow profiles extrusion and Friction Stir Welding (FSW), through the results obtained from a wide experimental campaign on AA6082-T6 aluminum alloys. Microstructure evaluation, tensile tests and micro-hardness measurements realized on specimens extracted by samples of the two processes are discussed also by means of the results obtained from coupled FEM simulation of the processes. ©2007 American Institute of Physics
<title>Micromechanical properties of AIN, TiN, and AIN/TiN nanostructured multilayer coatings</title>
2003
Coatings of AlN, TiN and nanostructured multilayer AlN/TiN have been deposited by reactive sputtering on sapphire, tungsten carbide (WC) and stainless steel substrates. The microhardness, adhesion and formation of cracks under indentation tests, were investigated. It was found that the adhesion of coatings on steel was higher, than on WC for all investigated samples. Nanostructured multilayer AlN/TiN films have the best adhesion and fracture toughness both on the hard (WC) and on the soft (stainless steel) substrates if compared with that for AlN and TiN "single layer" coatings. The effect of γ-radiation on mechanical properties of transparent AlN films was investigated. After the exposure …
The Effect of Building Direction on Microstructure and Microhardness during Selective Laser Melting of Ti6Al4V Titanium Alloy
2021
AbstractDuring the last few years, additive manufacturing has been more and more extensively used in several industries, especially in the aerospace and medical device fields, to produce Ti6Al4V titanium alloy parts. During the Selective Laser Melting (SLM) process, the heterogeneity of finished product is strictly connected to the scan strategies and the building direction. An optimal managing of the latter parameters allows to better control and defines the final mechanical and metallurgical properties of parts. Acting on the building direction it is also possible to optimize the critical support structure. In particular, more support structures are needed for the sample at 0°, while very…