Search results for "Industrial and Manufacturing Engineering"
showing 10 items of 1866 documents
Life cycle assessment of storage systems: the case study of a sodium/nickel chloride battery
2014
This study assesses the energy and environmental impacts of sodium/nickel chloride batteries, one of the emerging battery technologies for energy storage and smart grids. The analysis was conducted using the Life Cycle Assessment methodology according to the standards of the ISO 14040 series. The study system was one sodium/nickel cell battery providing electric storage for a photovoltaic system, and the manufacturing, operation, and end-of-life steps were analysed. The results indicated that the operation step has the greatest energy impact (55-70% of the total), with the manufacturing step, particularly cell manufacturing, contributing the greatest environmental impact (>60% of the total)…
Stationary battery systems in the main world markets: Part 2: Main trends and prospects
2017
Stationary battery systems are gaining a lot of interest in recent years, mainly because of their ability to balance generation and demand of electricity over time. The intermittent nature of renewable generation connected to the power grid is causing major stability and reliability issues in the power system, that can be solved also using stationary storage systems, able to provide the ancillary services necessary to the proper operation of the power network. Despite the considerable advantages offered by these technologies, the electrochemical storage industry is still in the nascent state and it is important to identify the main trends and prospects in relation to future technical develo…
Utilization of waste sodium sulfate from battery chemical production in neutral electrolytic pickling
2021
Abstract Several industrial activities produce metal sulfates, which are controlled by strict limitations for wastewater concentrations of sulfate. One emerging area where these activities occur is the production of lithium-ion battery chemicals in which sodium sulfates are formed because of cathode precursor co-precipitation. Several solutions for sulfate removal exist, but one option is to reuse the sulfate side stream in other processes to increase circular economy and atom efficiency. In this paper, the reuse of sodium sulfate solution in a steel industry pickling solution is considered. Neutral electrolytic pickling experiments were carried out to compare the pickling behavior of the e…
Techno-economic evaluation of PV based institutional smart micro-grid under energy pricing dynamics
2020
Abstract The solar photovoltaic (PV) system with battery energy storage have a lot of potential to provide reliable and cost-effective electricity and to contribute in micro-grid operation. However, the operational performance of such type of micro-grid system depends on many factors (e.g. techno-economic sizing, energy management among the sources, market energy prices dynamics, energy dispatch strategies, etc.). In this paper, a typical Indian institutional energy system has considered for techno-economic performance evaluation for operating as a smart micro-grid under market energy pricing dynamics. The institutional energy system has integrated PV, battery storage and DG for operating a…
Adaptive energy management strategy for sustainable voltage control of PV-hydro-battery integrated DC microgrid
2021
Abstract DC microgrid has relatively more advantages of power quality, not requirement of reactive power, higher operational efficiency compare to AC microgrid. DC microgrid can facilitate effective integration of distributed clean energy resources and efficient solution for providing electricity to remote areas (e.g. North Eastern States of India). Recently, India has commissioned small hydro, solar PV and battery storage integrated DC microgrids (MGs) to meet the locally increasing load demand of northeastern states. The sudden change in solar insolation during the load power dynamics can cause unbalanced power flow in such isolated MGs. Due to the slow response time of small hydro power …
Development of a membrane-less microfluidic thermally regenerative ammonia battery
2021
Thermally regenerative ammonia battery is a promising approach to make use of waste heat and generate electrical energy. However, according to literature, the price of the energy obtained by this device is much higher than alternative renewable technologies (such as wind, solar, geothermal, etc.). To make the process more viable for applicative purposes, it would be necessary to reduce dramatically the cost of the membrane or to avoid it. Hence, the aim of the present work is to increase the economic figures of thermally regenerative ammonia battery avoiding the use of membranes. It was concluded that this result can be obtained by developing the process in a microfluidic flow cell with lam…
Surface finish on hardened bearing steel parts produced by superhard and abrasive tools
2007
New technological process consisting of hard turning (HT) followed by abrasive machining, in place of the widely used method in industry, i.e., hard turning versus grinding, has lately been launched in the automotive industry. This is because, many transmissions parts, such as synchronizing gears, crankshafts and camshafts require superior surface finish along with appropriate fatigue performance. This paper provides a comprehensive characterization of part surface finish produced in dry turning of a hardened AISI 52100 bearing steel using mixed ceramic (MC) and PCBN tools, and also its modification after special abrasive finishing operations including superfinishing (SF) and belt grinding …
Facility layout problem: Bibliometric and benchmarking analysis
2019
Facility layout problem is related to the location of departments in a facility area, with the aim of determining the most effective configuration. Researches based on different approaches have been published in the last six decades and, to prove the effectiveness of the results obtained, several instances have been developed. This paper presents a general overview on the extant literature on facility layout problems in order to identify the main research trends and propose future research questions. Firstly, in order to give the reader an overview of the literature, a bibliometric analysis is presented. Then, a clusterization of the papers referred to the main instances reported in literat…
A new compact formulation for the discrete p-dispersion problem
2017
Abstract This paper addresses the discrete p -dispersion problem (PDP) which is about selecting p facilities from a given set of candidates in such a way that the minimum distance between selected facilities is maximized. We propose a new compact formulation for this problem. In addition, we discuss two simple enhancements of the new formulation: Simple bounds on the optimal distance can be exploited to reduce the size and to increase the tightness of the model at a relatively low cost of additional computation time. Moreover, the new formulation can be further strengthened by adding valid inequalities. We present a computational study carried out over a set of large-scale test instances i…
PLA graphene nanoplatelets nanocomposites: Physical properties and release kinetics of an antimicrobial agent
2017
Abstract Graphene nanoplatelets (GnP) as filler and ciprofloxacin (CFX) as biocide were incorporated via melt-compounding into poly(lactic acid) (PLA) to obtain biopolymer-based nanocomposites with antimicrobial properties. GnP were added with the aim of improving the mechanical properties of the antimicrobial system and tuning the drug release. The obtained systems were mechanically characterized in tensile mode by quasi-static and dynamic mechanical tests. Furthermore, rheological measurements were performed. The morphology of the samples was analyzed through scanning electron microscopy (SEM). Moreover, a mathematical model, i.e. power law model, was used to fit the release data in order…