Search results for "Industrial and Manufacturing Engineering"
showing 10 items of 1866 documents
Optimization of 3-DOF Parallel Motion Devices for Low-Cost Vehicle Simulators
2017
Motion generation systems are becoming increasingly important in certain Virtual Reality (VR) applications, such as vehicle simulators. This paper deals with the analysis of the Inverse Kinematics (IK) and the reachable workspace of a three-degrees-of-freedom (3-DOF) parallel manipulator, proposing different transformations and optimizations in order to simplify its use with Motion Cueing Algorithms (MCA) for self-motion generation in VR simulators. The proposed analysis and improvements are performed on a 3-DOF heave-pitch-roll manipulator with rotational motors, commonly used for low-cost motion-based commercial simulators. The analysis has been empirically validated against a real 3-DOF …
Testing soil water repellency in a Sicilian area two years after a fire
2019
The water drop penetration time (WDPT) technique was applied in 2018 to check persistence of soil water repellency (SWR) in a Sicilian mountain area affected by a wildfire on June 2016. A total of four sites, that were severely water repellent immediately after burning, were sampled. Depending on the site, wettable soil conditions, less SWR and maintenance of a noticeable SWR were detected two years later. At the site showing a near-constant SWR, WDPTs were particularly high in the top soil layer (0-0.03 m) and they appreciably decreased more in depth. Signs of decreasing SWR in drier soil conditions and in association with coarser soil particles were also detected at this site. High gradie…
Big Data in operations and supply chain management: a systematic literature review and future research agenda
2021
In the era of digitalisation, the role of Big Data is proliferating, receiving considerable attention in all sectors and domains. The domain of operations and supply chain management (OSCM) is no different since it offers multiple opportunities to generate a large magnitude of data in real-time. Such extensive opportunities for data generation have attracted academics and practitioners alike who are eager to tap different elements of Big Data application in OSCM. Despite the richness of prior studies, there is limited research that extensively reviews the extant findings to present an overview of the different facets of this area. The current study addresses this gap by conducting a systema…
Advanced teleoperation and control system for industrial robots based on augmented virtuality and haptic feedback
2021
[EN] There are some industrial tasks that are still mainly performed manually by human workers due to their complexity, which is the case of surface treatment operations (such as sanding, deburring, finishing, grinding, polishing, etc.) used to repair defects. This work develops an advanced teleoperation and control system for industrial robots in order to assist the human operator to perform the mentioned tasks. On the one hand, the controlled robotic system provides strength and accuracy, holding the tool, keeping the right tool orientation and guaranteeing a smooth approach to the workpiece. On the other hand, the advanced teleoperation provides security and comfort to the user when perf…
Teleoperation of industrial robot manipulators based on augmented reality
2020
[EN] This research develops a novel teleoperation for robot manipulators based on augmented reality. The proposed interface is equipped with full capabilities in order to replace the classical teach pendant of the robot for carrying out teleoperation tasks. The proposed interface is based on an augmented reality headset for projecting computer-generated graphics onto the real environment and a gamepad to interact with the computer-generated graphics and provide robot commands. In order to demonstrate the benefits of the proposed method, several usability tests were conducted using a 6R industrial robot manipulator in order to compare the proposed interface and the conventional teach pendant…
Geometrical deviation of end-of-life parts as a consequence of reshaping by single point incremental forming
2021
AbstractPutting in place circular economy strategies is an urgent challenge to face. In this scenario, manufacturing processes play a relevant role as efficient material reuse enabler. Scientists have to make an effort either to find new process or to rethink old process to reprocess end-of-life (EoL) component to recover both material and functions. In this paper, single point incremental forming (SPIF) process is used for reshaping sheet metal EoL components. The entire process chain was replicated including both deep drawing process (to imitate the end-of-life component) as well as SPIF operations (to obtain the reshaped components). The geometrical deviation as a consequence of SPIF ope…
Manufacturing processes as material and energy efficiency strategies enablers: The case of Single Point Incremental Forming to reshape end-of-life me…
2021
Abstract Making materials consumes about 21% of the global energy demand; concerning metals production, it accounts for about 8% of total global energy consumption. Circular economy strategies such as longer life, more intense use, repair, product upgrades, modularity, remanufacturing, component reuse, and open/closed-loop recycling are strategies to put in place urgently to reduce the environmental impact of raw material production. Although recycling of metals is the most used strategy and is being improved in terms of efficiency, it is mandatory moving towards more virtuous circular economy strategies, such as product/component reuse. In this paper a novel reuse strategy for sheet metal …
Prediction of Vehicle Crashworthiness Parameters Using Piecewise Lumped Parameters and Finite Element Models
2018
Estimating the vehicle crashworthiness parameters experimentally is expensive and time consuming. For these reasons different modelling approaches are utilized to predict the vehicle behaviour and reduce the need for full-scale crash testing. The earlier numerical methods used for vehicle crashworthiness analysis were based on the use of lumped parameters models (LPM), a combination of masses and nonlinear springs interconnected in various configurations. Nowadays, the explicit nonlinear finite element analysis (FEA) is probably the most widely recognized modelling technique. Although informative, finite element models (FEM) of vehicle crash are expensive both in terms of man-hours put into…
Advancing manufacturing systems research at NAMRC 46
2018
Research on manufacturing systems is further enriched and becomes stronger at the 46th North American Manufacturing Research Conference (NAMRC 46) at Texas A&M University, College Station, TX, USA. Advancing manufacturing systems is more prevalent than before due to recent industrial revolution (or Industry 4.0), continuous business decentralisation and needs for better overall resource efficiency and effectiveness. Manufacturers are competing in a global, dynamic marketplace that demands excellence in quality and service, throughput, innovativeness, agility in production, short response time to changing markets, and tight profitable margins. In the 21st century, manufacturing will be g…
Re-forming end-of-life components through single point incremental forming
2020
Abstract Applying Circular Economy strategies is mandatory to face material demand while minimizing the environmental impact. Manufacturing processes are to be thought as means to enable material/component reuse strategies. This paper presents the suitability of Single Point Incremental Forming (SPIF) to re-form End-of-life sheet metal components. Deep drawing followed by SPIF process on aluminium alloys were carried out to simulate reforming processes chain. The resulting thinning and strain distributions were experimentally analysed for different configurations. The research proves that the local action and enhanced formability nature of SPIF allow non-homogeneously thinned and reduced fo…