Search results for "Instrumentation"
showing 10 items of 4914 documents
Modeling of Magnetoresistive-Based Electrical Current Sensors: A Technological Approach
2007
The utilization of modeling tools can, in many cases, help us in the design and final prototyping of any sort of sensors. In this paper, we describe a finite-element method (FEM) model applied to a hybrid technology involving a full Wheatstone bridge spin-valve-based electrical current sensor. After validating the model against experimental results, we focus our studies on geometrical aspects of the sensor configuration, in order to detect possible deviations that may have occurred during the fabrication process. In this regard, the characteristics of the behavior of the sensor depending on lateral displacements and inclination are included. Moreover, the frequency response of the sensor is…
Rogowski coil current transducer compensation method for harmonic active power error
2015
Abstract In the harmonic active power measurement, the highest uncertainties are generally introduced by the current and voltage transducers. In a previous paper, the authors showed that the current transformer (CT) can introduce significant errors in such measurement, especially if the phase shift between voltage and current is close to ±90°. In such condition the errors on harmonic power measurement are mainly due to the CT phase displacement. This paper shows that better results can be achieved with more linear transducers, such as the Rogowski coil current transducers (RCCTs), whose metrological performance in distorted condition can be improved, by means of a proper compensation method…
Frequency domain identification of the fractional Kelvin-Voigt’s parameters for viscoelastic materials
2019
Abstract In this work, a new innovative method is used to identify the parameters of fractional Kelvin-Voigt constitutive equation. These parameters are: the order of fractional derivation operator, 0 ≤ α ≤ 1, the coefficient of fractional derivation operator, CV, and the stiffness of the model, KV. A particular dynamic test setup is developed to capture the experimental data. Its outputs are time histories of the excitation and excited accelerations. The investigated specimen is a polymeric cubic silicone gel material known as α-gel. Two kinds of experimental excitations are used as random frequencies and constant frequency harmonic excitations. In this study, experimental frequency respon…
Extended fractional-order Jeffreys model of viscoelastic hydraulic cylinder
2020
A novel modeling approach for viscoelastic hydraulic cylinders, with negligible inertial forces, is proposed, based on the extended fractional-order Jeffreys model. Analysis and physical reasoning for the parameter constraints and order of the fractional derivatives are provided. Comparison between the measured and computed frequency response functions and time domain transient response argues in favor of the proposed four-parameter fractional-order model.
Eddy current imaging with an atomic radio-frequency magnetometer
2016
We use a radio-frequency $^{85}$Rb alkali-vapor cell magnetometer based on a paraffin-coated cell with long spin-coherence time and a small, low-inductance driving coil to create highly resolved conductivity maps of different objects. We resolve sub-mm features in conductive objects, we characterize the frequency response of our technique, and by operating at frequencies up to 250 kHz we are able to discriminate between differently conductive materials based on the induced response. The method is suited to cover a wide range of driving frequencies and can potentially be used for detecting non-metallic objects with low DC conductivity.
Electrical ammeter based on spin-valve sensor.
2012
The present work shows an electrical ammeter for laboratory purpose based on a magnetoresistive (MR) spin-valve (SV) sensor. The proposed ammeter measures a 10 A maximum current and offers a maximum frequency response between 150 and 800 kHz depending on the electronics whole gain. These features are due to the use of a new generation MR-SV current sensor and a conditioning electronics that compensates in frequency and temperature the sensor response. With little adjustments in the electronics and changing the position of the sensor with respect to current carrying conductor, the designed instrument is able to measure higher current levels. The work shows the proposed ammeter with its diffe…
Analysis of Fresnel Zone Plates Focusing Dependence on Operating Frequency
2017
[EN] The focusing properties of Fresnel Zone Plates (FZPs) against frequency are analyzed in this work. It is shown that the FZP focal length depends almost linearly on the operating frequency. Focal depth and focal distortion are also considered, establishing a limit on the frequency span at which the operating frequency can be shifted. An underwater FZP ultrasound focusing system is demonstrated, and experimental results agree with the theoretical analysis and simulations.
Pinhole Zone Plate Lens for Ultrasound Focusing
2017
[EN] The focusing capabilities of a pinhole zone plate lens are presented and compared with those of a conventional Fresnel zone plate lens. The focusing properties are examined both experimentally and numerically. The results confirm that a pinhole zone plate lens can be an alternative to a Fresnel lens. A smooth filtering effect is created in pinhole zone plate lenses, giving rise to a reduction of the side lobes around the principal focus associated with the conventional Fresnel zone plate lens. The manufacturing technique of the pinhole zone plate lens allows the designing and constructing of lenses for different focal lengths quickly and economically and without the need to drill new p…
Probing Laser Plasma Dynamics Using High-Order Harmonics Generation in Carbon-Containing Nanomaterials
2021
We study high-order harmonics generation from plasmas generated from graphite, fullerenes, carbon nanotubes, carbon nanofibers, diamond nanoparticles, and graphene. Our approach utilizes a heating nanosecond laser pulse to produce plasmas that serve as the media for high harmonic generation from a subsequent driven femtosecond laser pulse. High harmonics are generated at different time delays following the plasma formation, which allows us to analyze the spreading of species with different masses. We analyze the harmonic yields from species of single carbon atom, 60 atoms (fullerene), 106 atoms (diamond nanoparticles), 109 atoms (CNTs and CNFs), and even much larger species of graphene shee…
Design of a Programmable and Modular Neuromuscular Electrical Stimulator Integrated Into a Wireless Body Sensor Network
2021
Neuromuscular electrical stimulation finds application in several fields, from basic neurophysiology, to motor rehabilitation and cardiovascular conditioning. Despite the progressively increasing interest in this technique, its State-of-the-Art technology is mainly based on monolithic, mostly wired devices, leading to two main issues. First, these devices are often bulky, limiting their usability in applied contexts. Second, the possibility of interfacing these stimulation devices with external systems for the acquisition of electrophysiological and biomechanical variables to control the stimulation output is often limited. The aim of this work is to describe the design and development of a…