Search results for "Ionic polymerization"
showing 10 items of 481 documents
Styrene polymerization using nickel(II) complexes as catalysts
2005
International audience; Styrene polymerization is investigated with neutral and cationic Ni(II) complexes, i.e. Ni(bipy)Me-2, 1, Ni(bipy)Br-2, 2, Ni(phen)Br-2, 3, or Ni(Me(2)phen)Br-2, 4, Ni(acac)(2), 5, (bipy = 2,2 '-bipyridine, phen = phenanthroline, Me,phen = 2,9-dimethyl-1, 10-phenanthroline, acac acetylacetonate), activated by [NHMe2Ph][B(C6F5)(4)] or B(C6F5)(3) as cocatalysts, in the presence of AlMe3. The influence on the polystyrene features and the reaction kinetics of the nickel complex and boron activator, the Al/Ni or B/Ni molar ratios as well as the monomer concentration are studied. Catalytic systems derived from 2, 3 or 5 and [NHMe2Ph][B(C6F5)(4)] at a Ni:B:Al ratio of 1: 1:5…
Effect of buffer nature and concentration on the chromatographic performance of basic compounds in the absence and presence of 1-hexyl-3-methylimidaz…
2019
Abstract In reversed-phase liquid chromatography, the performance for basic compounds is affected by the interaction of the protonated (cationic) species with the anionic free silanols on the alkyl-bonded stationary phases. Using aqueous-organic mobile phases in the absence of additives, the retention may be too high, and the peaks be broad and asymmetric. The performance is improved by addition to the mobile phase of ionic liquids, from which 1-hexyl-3-methylimidazolium chloride ([C6MIm][Cl]) has especially good characteristics. A recent report has also revealed that the use of the phosphate system as buffer, at varying concentration and pH, may have a significant role in the chromatograph…
Intermolecular interactions in dictating the self-assembly of halogen derivatives of bis-(N-substituted oxamato)palladate(ii) complexes
2016
Three palladium(II) complexes of formula (n-Bu4N)2[Pd(4-Fpma)2] (1), (n-Bu4N)2[Pd(4-Clpma)2]·4H2O (2) and (n-Bu4N)2[Pd(4-Brpma)2]·4H2O (3) [n-Bu4N+ = tetra-n-butylammonium cation, 4-Fpma = N-4-fluorophenyloxamate, 4-Clpma = N-4-chlorophenyloxamate and 4-Brpma = N-4-bromophenyloxamate] have been prepared and their structures determined by single crystal X-ray diffraction. Each palladium(II) ion in 1–3 is four-coordinate with two oxygen and two nitrogen atoms from two fully deprotonated oxamate ligands building PdO2N2 square planar surroundings, the oxamate ligands exhibiting trans (1 and 2) and cis (3) dispositions. The fluoro substituent and the organic counterion in 1 are involved in C–H⋯F…
On Demand One-Pot Mild Preparation of Layered Double Hydroxides and Their Hybrid Forms: Advances through the Epoxide Route.
2019
Epoxide ring opening driven alkalinization process was explored with the aim of preparing layered double hydroxide (LDH) phases on demand, at room temperature. Employing iodide as nucleophilic agent, the precipitation reaction can be driven under much lower halide concentrations. This scenario favors the selective intercalation of concomitant bulky oxo anions as nitrate or perchlorate in the LDH products, allowing for the one-pot synthesis of an LDH able to delaminate in formamide. Even large dicarboxylic acids, - O2 C-(CH2 )n -CO2 - , with n up to 8, can be quantitively intercalated within the growing LDH phase, providing a versatile one-pot route for hybrid LDHs as well. Under the mild co…
Mucoadhesive Polymer Hyaluronan as Biodegradable Cationic/Zwitterionic-Drug Delivery Vehicle
2014
Mucoadhesive polymers in pharmaceutical formulations release drugs in mucosal areas. They interact and fix to mucus via molecular interpenetration, etc ., which increase drug bioavailability. Polymers physicochemical properties affect formulation mucoadhesion, rheological behaviour and drug absorption. Hyaluronan (HA) is selected as a mucoadhesive and biodegradable polymer. Geometric, topological and fractal analyses are carried out with program TOPO. Reference calculations are performed with algorithm GEPOL. Procedure TOPO underestimates molecular volume by 0.7%. Error results 5% in surface area and derived topological indices. Solvent-accessible surface is undercalculated by 3%: from hexa…
Polymerizable and polymeric zwitterionic surfactants: 1. Synthesis and bulk properties
1991
Abstract The synthesis of a series of permanently zwitterionic surfactant monomers based on sulphobetaines and the preparation of their polymers is described. Solubilities, thermal properties and bulk structures of the zwitterionic polymers are studied with respect to their molecular architecture, and compared with cationic analogues. The various solubilities of the polymers can be correlated with their molecular geometry, enabling differentiation into distinct classes. This behaviour is paralleled by the observed bulk structures of the polymers where distinct classes of superstructures are present. However, independently of the molecular geometry, no thermal transition could be detected fo…
Reactions of α-diimino ligands with the chloro-bridged dimer [RhCl(COD)]2(COD=1,5-cyclooctadiene)
1988
Abstract The reactions of α-diimino ligands N - N ′ [ N - N ′= 2,2′-bipyridine (bipy), C 5 H 4 N2CHNR (R= C 6 H 4 OMe- p , PyCa), RNCHCHNR (R=C 6 H 4 - OMe- p , DAB)] with [RhCl(COD)] 2 give rise to stoichiometry, solvent, ligand, and temperature dependent equilibria. In general, the 1/1 ligand/dimer reaction yields the ionic product [Rh(COD)( N - N ′)] [RhCl 2 (COD)], at room temperature. For N - N ′=DAB, the ionic form is in equilibrium with the binuclear compound [{RhCl(COD)} (μ-DAB){RhCl(COD)}] (containing a σ σ,'- N , N ′ bridging α-diimine), which becomes the predominant species at low temperatures. In [Rh(COD)( N - N ′)] [RhCl 2 (COD)], a fast exchange of the Rh(COD) unit betwe…
Transport mechanism of peptides through supported liquid membranes
2007
Abstract The transport of selected dipeptides through supported liquid membranes impregnated with di(2-ethylhexyl) phosphoric acid in n-dihexylether has been investigated. The fluxes depend on the side chain of amino acids, presence in the peptide structure. The highest fluxes were obtained for the peptides extracted with the highest efficiency. It has been found that the hydrophobicity of investigated peptides, was not the major factor, influences their SLM permeation. In the conditions studied, it has been observed that the transport of peptide–carrier complex was depending on the acidic–basic properties of the analyte. The linearly least-square fittings of log {K1 + [H+]D} and log[(HR)2]…
Kinetics and Mechanisms in the Anionic Polymerization of Methacrylic Esters
1987
Under appropriate conditions the anionic polymerization of methacrylates proceeds in an ideal manner leading to polymers with narrow molecular weight distributions. From the kinetics of polymerization and from the microstructure of the polymers the existence of different active species is concluded, the most important one being a peripherally solvated contact ion pair. Depending on polymerization conditions two different modes of monomer addition can occur. Homo- and copolymerization experiments show that the influence of the ester group is mainly given by electronic effects. In non- polar solvents the polymerization of tert.-butyl methacrylate (in contrast to methyl methacrylate) leads to …
Oxygen atom transfer catalysis by dioxidomolybdenum(VI) complexes of pyridyl aminophenolate ligands
2021
Abstract A series of new cationic dioxidomolybdenum(VI) complexes [MoO2(Ln)]PF6 (2–5) with the tripodal tetradentate pyridyl aminophenolate ligands HL2-HL5 have been synthesized and characterized. Ligands HL2-HL4 carry substituents in the 4-position of the phenolate ring, viz. Cl, Br and NO2, respectively, whereas the ligand HL5, N-(2-hydroxy-3,5-di-tert-butylbenzyl)-N,N-bis(2-pyridylmethyl)amine, is a derivative of 3,5-di-tert-butylsalicylaldehyde. X-ray crystal structures of complexes 2, 3 and 5 reveal that they have a distorted octahedral geometry with the bonding parameters around the metal centres being practically similar. Stoichiometric oxygen atom transfer (OAT) properties of 5 with…