Search results for "LEDs"
showing 10 items of 32 documents
Study of voltage decrease in organic light emitting diodes during the initial stage of lifetime
2016
Abstract We report the results of lifetime DC testing at constant current of not-encapsulated organic light emitting diodes (OLEDs) based on Tris (8 idroxyquinoline) aluminum (Alq3) as emitting material. In particular, a voltage decrease during the initial stage of the lifetime test is observed. The cause of this behavior is also discussed, mainly linked to initial Joule self-heating of the device, rising its temperature above room temperature until thermal equilibrium is reached at steady state.
Stability improvement of PMMA and Lumogen® coatings for hybrid white LEDs
2014
Hybrid white LEDs employing perylene-based dyes for the frequency down-conversion of blue light, generated by a standard inorganic source, suffer from colour rendering variations due to the degradation of the organic molecule under prolonged irradiation. To avoid such inconvenient, proper encapsulation of the dyes in resins or other polymer matrices can prevent their accelerated ageing; nevertheless, embedding polymers can also exhibit significant bleaching caused by chemico-physical agents. Among all, polymethyl methacrilate (PMMA) is one of the most used materials for the fabrication of hybrid LEDs' colour conversion coatings, therefore its stability needs to be investigated.
Energie rinnovabili e trasformazioni territoriali: il caso del fotovoltaico in Sicilia
2021
La presente comunicazione intende trattare il tema delle trasformazioni territoriali sono avvenute negli ultimi due decenni in Sicilia, in seguito alla costruzione di centinaia di impianti fotovoltaici di piccole, medie e grandi dimensioni. Tali impianti sono stati costruiti causando spesso profondi mutamenti paesaggio, con trasformazioni territoriali che non hanno tenuto conto delle caratteristiche di produttività dei suoli, della vicinanza di aree protette e siti della Rete Natura 2000 e soprattutto senza il reale coinvolgimento delle comunità locali che spesso hanno subito passivamente tali trasformazioni. Gli strumenti di pianificazione territoriale, quali il Piano Paesistico Regionale,…
Warm white LED light by frequency down- conversion of mixed perylene-based dyes
2013
The growing demand of the solid-state lighting market for the development of sources for illumination has led to the fabrication of the first white LED in 1997, which employed a blue LED coated by a Ce:YAG phosphor to mix the down-converted yellow light with the blue one. The white light appears cold due to the weakness of red components in the emission spectrum. In order to obtain a warmer white, one possible solution is to add a red phosphor to the yellow one to move the chromatic coordinates properly, though the luminous efficiency drastically decreases due to the increased light absorption of the coating layer. It is generally believed that the low efficacy of warm white LEDs is the mai…
An inconvenient influence of iridium(III) isomer on OLED efficiency.
2010
The recently reported heteroleptic cyclometallated iridium(III) complex [Ir(2-phenylpyridine)(2)(2-carboxy-4-dimethylaminopyridine)] N984 and its isomer N984b have been studied more in detail. While photo- and electrochemical properties are very similar, DFT/TDDFT calculations show that the two isomers have different HOMO orbital characteristics. As a consequence, solution processed OLEDs made using a mixture of N984 and isomer N984b similar to vacuum processed devices show that the isomer has a dramatic detrimental effect on the performances of the device. In addition, commonly used thermogravimetric analysis is not suitable for showing the isomerization process. The isomer could impact pe…
Warm white LEDs based on Lumogen® Red and Yellow
2013
One of the most widespread solutions for the production of white LEDs is the frequency downconversion of a part of the light, coming from a blue source, by exciting one or more materials (typically Ce:YAG) that emit at longer wavelength [1]. In this work we report ona simple and less expensive method to fabricate warmwhite-light LEDsusingthe photoluminescence of Lumogen®, a perylene-based polymer dyecommercialized by BASF,that has already beenprovedto be a good substitute for conventi onal inorganic colour conversion [2],[3]. Standard InGaN-based blue LEDs (~ 450 nm) were fabricated on a sapphire substrate by metal organic chemical vapour deposition. Both Lumogen® Yellow, and Red dyes wered…
Warm white LED light by frequency down-conversion of mixed yellow and red Lumogen®
2013
This work reports on the benefits and promising opportunities offered by white LED hybrid technology, based on a mixing perylene-based dyes in order to obtain a warm white light for frequency-down conversion. In a standard Ce:YAG-based white LED, the white light appears cold due to the weakness of red wavelength components in the emission spectrum. In order to obtain a warmer white, one possible solution is to add a red phosphor to the yellow one to move the chromatic coordinates properly, though the luminous efficiency drastically decreases due to the increased light absorption of the coating layer. It is generally believed that the low efficiency of warm white LEDs is the main issue today…
A reaction engineering approach to kinetic analysis of photocatalytic reactions in slurry systems
2016
Abstract The knowledge of the rate equation is fundamental for the assessment of the activity of the photocatalytic material and for the study, design and optimization of photocatalytic reactors. In the case of photocatalytic reactions, the local volumetric rate of photon absorption (LVRPA) affects the reaction rate and its inherently uneven distribution within a “slurry” reactor makes complex a correct kinetic analysis. In the present work it is shown which are the critical aspects of the kinetic analysis in slurry reactors and how to carry out photocatalytic experiments to minimize the misinterpretations of the experimental results. In particular, the influence of the type of illumination…
Color Conversion Light-Emitting Diodes Based on Carbon Dots: A Review
2022
This paper reviews the state-of-the-art technologies, characterizations, materials (precursors and encapsulants), and challenges concerning multicolor and white light-emitting diodes (LEDs) based on carbon dots (CDs) as color converters. Herein, CDs are exploited to achieve emission in LEDs at wavelengths longer than the pump wavelength. White LEDs are typically obtained by pumping broad band visible-emitting CDs by an UV LED, or yellow–green-emitting CDs by a blue LED. The most important methods used to produce CDs, top-down and bottom-up, are described in detail, together with the process that allows one to embed the synthetized CDs on the surface of the pumping LEDs. Experimental results…
Rayleigh Equation Anomaloscope from Commercially Available LEDs
2012
Most precise classification of CVD (color vision deficits) can be provided by using anomaloscope. Today anomaloscopes are available, which can evaluate red-green (Rayleigh) and blue-green (Moreland) color defects.DOI: http://dx.doi.org/10.5755/j01.ms.18.2.1928