Search results for "LOAD"
showing 10 items of 1967 documents
A standard-compliant prototype for PV module curve detection
2014
In this paper, a prototype for PV module curve detection which features low cost and size and ensures high accuracy is proposed. The proposed architecture is based on a buck-boost converter in open-loop configuration. The proposed architecture is fully compliant with actual standard IEC60904. The duty-cycle control algorithm and its own effects on system performances are accurately investigated. The comparison of different duty-cycle patterns is carried out and performance evaluation is performed. Simulation results are shown to perform a valuable comparison of control algorithms. Preliminary experimental results on a laboratory prototype are presented.
Designing a Sustainable University Recharge Area for Electric Vehicles: Technical and Economic Analysis
2017
This article addresses the technical and economic challenges regarding the design of a “green” recharge area for electric vehicles at the University of Palermo in order to reduce costs and pollution connected to the charging process. Based on the behaviour of the student population, the electrical load is identified and two possible solutions are evaluated to manage the peak load: an orientation of the panels increasing the power at defined time and the use of a storage system. The main strength and weakness points of two systems are investigated by taking into account the Levelized Cost of Energy (LCOE), which reaches 75.3 €/MWh for the orientation of panel and 103 €/MWh for the storage sy…
Scalable and Privacy-Preserving Admission Control for Smart Grids
2015
International audience; Energy demand and production need to be constantly matched in the power grid. The traditional paradigm to continuously adapt the production to the demand is challenged by the increasing penetration of more variable and less predictable energy sources, like solar photovoltaics and wind power. An alternative approach is the so called direct control of some inherently flexible electric loads to shape the demand. Direct control of deferrable loads presents analogies with flow admission control in telecommunication networks: a request for network resources (bandwidth or energy) can be delayed on the basis of the current network status in order to guarantee some performanc…
Frequency stability in microgrid: control strategies and analysis of BESS aging effects
2016
In order to ensure a thorough analysis, all components placed in a microgrid would have to be considered to guarantee an effective energy management. To this aim, various algorithms are used both to preserve and restore power systems after significant disturbances. However, these models frequently do not evaluate components performance decline with the age and, consequently, they don't consider actual values during microgrid analysis, potentially affecting obtained results. In particular, evaluating energy storage systems aging and their effects has rarely been addressed in prior works. The present article proposes a model to maintain power system/microgrid stability after disturbances usin…
Machining Economics in FMS by a Fuzzy Approach
1995
Abstract In a conventional manufacturing system, cutting parameters have to be fixed in order to pursue the economical and productive target related to each cutting operation. In a Flexible Manufacturing System (FMS), as a consequence of the unbalanced workload due to the mutual interaction among the shared resources, the optimization of each operation does not allow the optimum of the global production system to be reached. A fuzzy programming model is developed in this paper in order to select cutting speeds of the operations in the production plan as a satisfying compromise solution between single operation and the integrated system targets.
Progress in the initial design activities for the European DEMO divertor: Subproject "Cassette"
2017
Abstract Since 2014 preconceptual design activities for European DEMO divertor have been conducted as an integrated, interdisciplinary R&D effort in the framework of EUROfusion Consortium. Consisting of two subproject areas, ‘Cassette’ and ‘Target’, this divertor project has the objective to deliver a holistic preconceptual design concept together with the key technological solutions to materialize the design. In this paper, a brief overview on the recent results from the subproject ‘Cassette’ is presented. In this subproject, the overall cassette system is engineered based on the load analysis and specification. The preliminary studies covered multi-physical analyses of neutronic, thermal,…
FDTD simulation for electromagnetic radiated emissions in 42 V vehicle electrical systems
2005
In this paper a full 3D approach, based on finite difference time domain method, is used to predict the electromagnetic radiated emissions from 42 V vehicle electrical loads. An experimental set-up has been arranged on purpose. A comparative analysis among measured and computed results is performed. The good agreement obtained among simulated and measured data enables to validate the numerical scheme. The proposed methodology contributes to predict electromagnetic emissions in the automotive environment since the design stage. Moreover, the proposed numerical tool can be used to define, for new vehicle electrical architectures, low cost test methods for electromagnetic compatibility and sui…
Reliability Analysis of a Stand-Alone PV System for the Supply of a Remote Electric Load
2010
The work presents a reliability analysis of a stand-alone photovoltaic system for the supply of electric loads located in remote areas not easily reachable by the low voltage distribution network. The analysis is performed by characterizing the electric load behavior by means of a Montecarlo approach for taking into account the stochastic variability of the electrical energy demand. A Montecarlo approach is used also for evaluating the electricity production of the stand alone photovoltaic system as a function of the hourly solar irradiation of the installation site. The variability both of the load and of the energy production are correlated and the probability that the load can remain uns…
Smart plugs: A low cost solution for programmable control of domestic loads
2014
International audience; Balancing energy demand and production is becoming a more and more challenging task for energy utilities. This is due to a number of different reasons among which the larger penetration of renewable energies which are more difficult to predict and the meagre availability of financial resources to upgrade the existing power grid. While the traditional solution is to dynamically adapt energy production to follow the time-varying demand, a new trend is to drive the demand itself by means of Direct Load Control (DLC). In this paper we consider a scenario where DLC functionalities are deployed at a large set of small deferrable energy loads, like appliances of residential…
Numerical and experimental analysis of load capacity of pressure vessels for large deformations
1991
Abstract A method of theoretical and experimental investigations of large deformations and load capacity of pressure vessels has been proposed. Algorithms and programs for numerical analysis (with the finite element method) of spatial stress and strain state and load capacity have been worked out according to the Prandtl-Reuss theory of plastic flow. Loading in the vessel was realized in an incremental way. The loading process was continued up to the moment when the maximum loading was obtained (i.e. the moment when state of equilibrium of the vessel was not possible). It has been found that in thin-walled circular vessels with rigid bottoms, when a ratio of length to their diameter is less…