Search results for "LOCI"
showing 10 items of 1277 documents
Experimental Study of Cross-flow Micro-turbines for Aqueduct Energy Recovery
2014
An important component of the management cost of aqueducts is given by the energy costs. Part of these costs can be recovered by transforming some of the many existing energy dissipations in electric energy by means of economic turbines. In this study an experimental work has been carried out: 1) to test the performance of an economic Cross-Flow turbine which maintains high efficiency within a large range of water discharges, and 2) to validate a new approximated formula relating main inlet velocity to inlet pressure. It is proved that the proposed formula, according to some simplifying assumption, exactly links inlet velocity to inlet pressure according to any possible geometry of the Cros…
Noncontact Air-Coupled Guided Wave Ultrasonics for Detection of Thinning Defects in Aluminum Plates
2001
Ultrasonic guided waves are gaining increasing attention for the inspection of platelike and rodlike structures. At the same time, inspection methods that do not require contact with the test piece are being developed for advanced applications. This paper capitalizes on recent advances in the areas of guided wave ultrasonics and noncontact ultrasonics to demonstrate a superior method for the nondestructive detection of thinning defects simulating hidden corrosion in thin aluminum plates. The proposed approach uses micromachined gas (air)-coupled capacitive transducers for the noncontact generation and detection of guided plate waves. Interesting features in the dispersive behavior of select…
Experimental and Numerical Analysis of a Cross-Flow Turbine
2016
An important component of the management cost of aqueducts is the energy costs. Part of these costs can be recovered by transforming some of the many existing energy dissipations into electric energy by means of economical turbines. This paper describes an experimental study that has been carried out in order to (1) test the performance of an economical cross-flow turbine that maintains high efficiency within a large range of water discharges, and (2) validate a new approximate formula relating main inlet velocity to inlet pressure. It is demonstrated that the proposed formula, on the basis of some simplifying assumptions, exactly links inlet velocity to inlet pressure with any possible geo…
MORPHODYNAMIC PROCESSES DOWNSTREAM OF MAN-MADE STRUCTURAL INTERVENTIONS: experimental investigation of the role of turbulent flow structures in the p…
2012
Abstract Experimental program was conducted to analyze scour – caused by a horizontal jet downstream of a rigid bed – and the flow velocity and turbulence characteristics within the scour hole. The experimental program was motivated by the fact that the knowledge of flow field, including turbulent characteristics, is fundamental to correctly simulate the bed-load transport and the temporal evolution of the scour hole and, thus, to define protective measures of scouring. In this paper some results of experiments – carried out to understand the role of flow turbulence in the prediction of scouring process and sediment movement – are reported. The analysis is conducted on the basis of detailed…
Performances Comparison for a Rotating Shaft Suspended by 4-Axis Radial Active Magnetic Bearings via 𝜇 -Synthesis, Loop-Shaping Design, and Sub ( 𝐻…
2011
The control systems applied on active magnetic bearing are several. A perfect levitation is characterized by maintaining the operating point condition that is characterized by the center of stator coincident with the geometric center of shaft. The first controller implemented for this purpose is PID controller that is characterized by an algorithm that leads the amplifier to produce control current until the operating point condition is not reached, this is obtained by an integration operator. The effect of an integrator is essential but not necessary for a centered levitation for example in the robust control characterized by a dynamic model depended on plant of system so that it depends o…
Residence time distribution of solid particles in a continuous, high-aspect-ratio multiple-impeller stirred vessel
2004
Abstract In this paper experimental information on the retention time distribution (RTD) of solid particles in a high-aspect-ratio vessel, stirred by three equally spaced Rushton turbines, is presented. The relevant data were obtained by a special technique named twin system approach (TSA) that greatly simplifies the handling of particle-laden streams and is therefore particularly suited for investigating particle RTD in flow systems. The technique fundamentals are first summarized, together with the data analysis procedure. This lastly requires a numerical deconvolution operation that is easily performed with the help of Z -transforms. Two different approaches for excluding the spurious co…
Monte Carlo simulation for the response analysis of long-span suspended cables under wind loads
2004
This paper presents a time-domain approach for analyzing nonlinear random vibrations of long-span suspended cables under transversal wind. A consistent continuous model of the cable, fully accounting for geometrical nonlinearities inherent in cable behavior, is adopted. The effects of spatial correlation are properly included by modeling wind velocity fluctuation as a random function of time and of a single spatial variable ranging over cable span, namely as a one-variate bi-dimensional (1V-2D) random field. Within the context of a Galerkin`s discretization of the equations governing cable motion, a very efficient Monte Carlo-based technique for second-order analysis of the response is prop…
Fire safety investigation for road tunnel ventilation systems – An overview
2014
Abstract In recent years, research activities about fire events in tunnel have received a significant impulse, especially after several accidents. The Computational Fluid Dynamic (CFD) has a fundamental role about. Researchers have spent resources on various topics involving numerical tools as the performance of a ventilation system, the influence of this on the air flow motion in the tunnel or the methods for fire schematization, fire-induced smoke characterization, turbulence models, etc. One of the main phenomena to consider for the safety when a fire occurs in a tunnel is the possibility of the fire-induced smoke to rise the tunnel (backlayering). A well-designed ventilation system shal…
Analysis of the bubbling behaviour of 2D gas solid fluidized beds
2008
Abstract In the field of gas–solid fluidization, bubbles, and all features regarding them, have a very great importance, as they significantly affect the process performance. Numerous experimental studies on bubbles, and their formation, evolution, and properties, have been performed in the past. These investigations appear particularly difficult, due to the nature of these systems, since the gas phase is distributed in both the bubble and the emulsion phase. Several experimental approaches have been developed to tackle this study. Among these, the Digital Image Analysis Technique purposely developed in Part I of the present work, based on the use of a video camera for monitoring the phenom…
A new high accuracy software based resolver-to-digital converter
2004
Tracking resolver-to-digital conversion (R/D converter or simply RDC) has emerged as one of the most robust method for obtaining high resolution position and angular speed information from resolvers. In this paper a low cost software based RDC is presented. The main features are: high accuracy, simple set up, high reliability and stability and good performances. Some experimental results, showing the capabilities of the proposed system, are presented and discussed. An output signal comparison between the proposed RDC and a commercial encoder is also presented.