Search results for "Large"
showing 10 items of 2197 documents
Experimental and Numerical Analysis of a Cross-Flow Turbine
2016
An important component of the management cost of aqueducts is the energy costs. Part of these costs can be recovered by transforming some of the many existing energy dissipations into electric energy by means of economical turbines. This paper describes an experimental study that has been carried out in order to (1) test the performance of an economical cross-flow turbine that maintains high efficiency within a large range of water discharges, and (2) validate a new approximate formula relating main inlet velocity to inlet pressure. It is demonstrated that the proposed formula, on the basis of some simplifying assumptions, exactly links inlet velocity to inlet pressure with any possible geo…
Mechanical construction and installation of the ATLAS tile calorimeter
2013
This paper summarises the mechanical construction andinstallation of the Tile Calorimeter for the ATLASexperiment at the Large Hadron Collider in CERN, Switzerland. The TileCalorimeter is a sampling calorimeter using scintillator as the sensitivedetector and steel as the absorber and covers the central region of the ATLASexperiment up to pseudorapidities ±1.7. The mechanical construction ofthe Tile Calorimeter occurred over a periodof about 10 years beginning in 1995 with the completionof the Technical Design Report and ending in 2006 with the installationof the final module in the ATLAS cavern. Duringthis period approximately 2600 metric tons of steel were transformedinto a laminated struc…
Latest Frontier Technology and Design of the ATLAS Calorimeter Trigger Board Dedicated to Jet Identification for the LHC Run 3
2016
To cope with the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2020, the “A Toroidal LHC ApparatuS” (ATLAS) experiment has planned a major upgrade. As part of this, the trigger at Level1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors, which each use different physics objects for the trigger selection. The article focusses on the jet Feature EXtractor (jFEX) prototype, one of the three types of Feature Extractors. Up to 2 TB/s have to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget.…
Commissioning Experience with the ATLAS Level-1 Calorimeter Trigger System
2007
The ATLAS Level-1 Calorimeter Trigger is one of the main elements of the first stage of event selection for the ATLAS experiment at the LHC. The input stage consists of a mixed analogue/digital component taking trigger sums from the ATLAS calorimeters. The trigger logic is performed in a digital, pipelined system with several stages of processing, largely based on FPGAs, which perform programmable algorithms in parallel with a fixed latency to process about 300 Gbyte/s of input data. The real-time output consists of counts of different types of physics objects and energy sums. The production of final modules started in 2006, and installation of these modules and the necessary infrastructure…
The measurement programme at the neutron time-of-flight facility n_TOF at CERN
2016
Neutron-induced reaction cross sections are important for a wide variety of research fields ranging from the study of nuclear level densities, nucleosynthesis to applications of nuclear technology like design, and criticality and safety assessment of existing and future nuclear reactors, radiation dosimetry, medical applications, nuclear waste transmutation, accelerator-driven systems and fuel cycle investigations. Simulations and calculations of nuclear technology applications largely rely on evaluated nuclear data libraries. The evaluations in these libraries are based both on experimental data and theoretical models. CERN’s neutron time-of-flight facility n TOF has produced a considerabl…
Design and testing of the high speed signal densely populated ATLAS calorimeter trigger board dedicate to jet identification
2017
Abstract—The ATLAS experiment has planned a major upgrade in view of the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2021. As part of this, the trigger at Level-1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors (three in total), which each uses different physics objects for the trigger selection. The contribution focusses on the jet Feature EXtractor (jFEX) prototype. Up to a data volume of 2 TB/s has to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget. Such requirements translate …
New statistical post processing approach for precise fault and defect localization in TRI database acquired on complex VLSI
2013
International audience; Timing issue, missing or extra state transitions or unusual consumption can be detected and localized by Time Resolved Imaging (TRI) database analysis. Although, long test pattern can challenge this process. The number of photons to process rapidly increases and the acquisition time to have a good signal over noise ratio (SNR) can be prohibitive. As a result, the tracking of the defect emission signature inside a huge database can be quite complicated. In this paper, a method based on data mining techniques is suggested to help the TRI end user to have a good idea about where to start a deeper analysis of the integrated circuit, even with such complex databases.
An assessment of the state of grain mixture with the use of the method of statistical reduction
1995
Abstract A new way of assessment of the state of a granular mixture is presented in this paper. It is based on the method of statistical reduction and it enables a more precise assessment to be made of the state of a grain mixture as compared with other methods, especially when the mixture represents a large population. The new method is illustrated by a computational example.
Turbulence model effect on heat exchange characteristics through the neutron beam window for European spallation source
2011
PurposeThe purpose of this paper is to compare k‐ω shear‐stress transport (SST) and large eddy simulation (LES) turbulence model application effect on numerical computation of flow pattern and heat exchange characteristics through the neutron beam window region for European spallation source setup model.Design/methodology/approachTransient hydrodynamic and thermal calculations with appropriate heat sources are performed using both turbulence models and typical discrepancies in flow and thermal patterns are discussed, as well as, simulation results are qualitatively compared with experimental data for heat transfer coefficient distribution α at the window surface.FindingsContribution of grea…
How to derive the analytical capacity model for not-conventional urban roundabouts
2008
The inapplicability of current methods for analyzing operations of urban not-conventional roundabouts (i.e. not referable to standard schemes) hampers seriously the assessment of their operational performances. Moreover, local constraints and the road network structure have produced lots of geometric layouts that make hard to propose an only framework to explain performances of not-conventional roundabouts. Also for these intersections it is hoped to have scientifically based methods to analyze operations with a proper reliability. Starting from these considerations, the paper shows the conceptual path followed to analyze operations at not-conventional roundabouts along an arterial of Paler…