Search results for "Lene"
showing 10 items of 4480 documents
Dispersion of titanate nanotubes for nanomedicine: comparison of PEI and PEG nanohybrids.
2014
In the present study, we report the dispersion of titanate nanotubes (TiONts) via polymer grafting (PolyEthylene Glycol, PEG) or polymer adsorption (polyethylene imine, PEI) where different TiONts/polymer ratios have been investigated. The TiONts/PEI and TiONts/PEG nanohybrids were characterized by scanning and transmission electron microscopy as well as by zeta potential measurements in order to determine both their dispersion state and stability in water (at different pH for zetametry). The nature of the chemical bonds at the surface of these nanohybrids was investigated by Fourier-transformed infrared (FTIR) spectroscopy while the grafting densities of PEG on the nanotubes were quantifie…
Thermomechanical Properties of Radiation-Modified Polyethylene/Ethylene-Propylene-Diene Copolymer/Liquid-Crystalline Copolyester Blends
1999
Radiation-modified blends of high-density polyethylene (PE) with ethylene-propylene-diene copolymer (EPDM; 10-65 wt.%) and thermotropic liquid-crystalline polymer (LCP; 10 wt.%) were investigated. The LCP was a liquid-crystalline copolyester of 40% poly(ethylene terephthalate) with 60% 4-hydroxybenzoic acid. The constituents were blended using a circular extruder, the specimens were prepared by compression molding and irradiated by 60Co γ-radiation up to 200 kGy. Mechanical, thermal, and morphological properties in wide temperature range were investigated for the irradiated and non-irradiated specimens. The effects of irradiation on the thermomechanical behaviour of the PE matrix are discus…
Effects of organoclay on morphology and properties of nanocomposites based on LDPE/PA-6 blends without and with SEBS-g-MA compatibilizer
2009
LDPE/PA-6 blends (75/25 wt/wt) were added with SEBS-g-MA (S) and/or an organoclay (20A) using different compounding sequences and the morphology and the properties of the blends or composites were investigated. An XRD study of the nanocomposites with pure polymers showed that 20A is intercalated by LDPE or PA-6 chains, whereas it is exfoliated by S if the clay concentration does not exceed 10 wt%. The SEM investigation showed that both S and 20A behave as efficient emulsifying agents for the LDPE/PA-6 blends. However, their effect on the mechanical properties was found to be opposite: S enhanced toughness but lowered the stiffness, whereas 20A improved the elastic modulus but impaired the i…
The role of the trifluoromethyl group in reactivity and selectivity in polar cycloaddition reactions. A DFT study
2012
Abstract The role of the trifluoromethyl group in reactivity, regio-, and stereoselectivity in cycloaddition reactions has been analyzed by studying the 1,3-dipolar cycloaddition (13DC) reactions of nitrone 4 with 3,3,3-trifluoro-1-nitropropene 7b and 3,3,3-trifluoro-2-nitropropene 14 using density functional theory (DFT) methods at the B3LYP/6-311G(d) level. The recent M06-2X functional has also been evaluated but, although the thermodynamic performance is improved, the kinetic data are not necessarily better than those obtained by the popular B3LYP functional for cycloaddition reactions. Four reactive channels associated with the meta and ortho regio- and endo and exo stereoselective appr…
Mono(cyclopentadienyl) Complexes of the Rare-Earth Metals
2002
I. Introduction 1953II. Overview of Synthesis, Structure, and Properties 1954A. Synthetic Methods 1954B. Ligands and Structures 1955III. Halo Complexes 1956A. General 1956B. Divalent Halo Complexes 1956C. Trivalent Halo Complexes 1957IV. Chalcogenido Complexes 1958A. General 1958B. Divalent Chalcogenido Complexes 1958C. Trivalent Chalcogenido Complexes 1959V. Pnicogenido Complexes 1960A. General 1960B. Divalent Amido and Phosphido Complexes 1960C. Trivalent Pnicogenido Complexes 19611. Bis(amido) Complexes 19612. Mixed Halo and Chalcogenido Complexes 1962VI. Hydrocarbyl and Silyl Complexes 1963A. General 1963B. Divalent Complexes 19631. Metallacarbaboranes 19632. Bimetallic Naphthalene Comp…
Characterization of ultra-high-molecular-weight polyethylene (UHMWPE) modified by ion implantation
2004
Abstract Surface modification of ultra high molecular weight polyethylene (UHMWPE) is induced by ion implantation of different ions at 300 keV energy. The aim of this work was the chemical, physical and mechanical characterization of the modified material in order to know deep inside about the effect of the ion beam upon the polymer. The irradiated surfaces are investigated by Raman spectroscopy, infrared absorption and micro-hardness analysis, scanning electron microscopy. Pin on disc measurements valuated the wear of the UHMWPE against a stainless steel probe; wear resistance increases of about 76% after the ion implantation. This result can be attributed to the ion bombardment inducing a…
Studies on electron-beam irradiation and plastic deformation of medical-grade ultra-high molecular weight polyethylene
2011
Abstract Separated and combined electron-beam irradiation and plastic deformation effects on the structures of ultra-high molecular weight polyethylene (UHMWPE) were studied. It was found that the concentration of carbonyl (ketones, esters and peresters), hydroxyl and vinyl groups increases with the growing dose of adsorbed electrons. It also tends to exhibit a slight increase in the melting point and crystallinity of the samples. A mechanical stress in the polymer was found to accelerate radiation-induced degradation. It was concluded that each of the factors studied (i.e. electron beam sterilization and plastic deformation) had a different impact on the polymer structure. The change in th…
A theoretical determination of the electronic spectrum of Methylenecyclopropene
1996
The vertical electronic spectrum of methylenecyclopropene, the prototype of the nonalternant hydrocarbons known as fulvenes, has been studied using multiconfigurational second-order perturbation theory. The calculations comprise three valence states and the 3s, 3p, and 3d members of the Rydberg series converging to the first π ionization limit. Vertical excitation energies to three valence states are found at 4.13, 6.12, and 6.82 eV. The second of them corresponds to an excitation from the highest occupied σ orbital to a π* orbital, while the other two are π → π* excitations. The third transition gives rise to the most intense feature in the electronic spectrum. The results are rationalized…
Theoretical characterization of the electronic structure of polymeric systems combining disilanylene and /spl pi/-conjugated units
1994
Summary form only given. Polymeric organosilicon systems are in the forefront of research, due to their intriguing properties (semiconducting behavior, photoconduction, non-linear optical properties, and thermo- and piezochromism). The fundamental skeletons of most of these polymers consist of a /spl sigma/-electron network formed by silicon-silicon bonds. Recently, polymeric organosilicon systems containing a regular alternation of a disilanylene unit and carbon /spl pi/-conjugated moiety as phenylene, ethynylene, or ethenylene have been synthesized. The purpose of this contribution is to perform a detailed study of the electronic structure of polymers containing alternated disilanylene an…
Time-monitoring sensor based on oxygen diffusion in an indicator/polymer matrix
2013
Abstract A time-monitoring sensor based on the oxidation of leuco methylene blue (LMB) to methylene blue (MB) was developed. The sensor changes its color from yellow to green in the presence of oxygen and was integrated into a poly(vinyl alcohol) matrix. The diffusion of the oxygen in the polymer matrix as well as the oxygen uptake due to the oxidation reaction determines the time monitoring of the sensor. A physical model has been developed that accounts for both the diffusion as well as the oxidation reaction. For this purpose, the reaction kinetics was determined experimentally. Moreover, the diffusion coefficient of oxygen was determined and concentration profiles in the polymer matrix …