Search results for "Linear"
showing 10 items of 7165 documents
Finite element analysis of the out-of-plane behavior of FRP strengthened masonry panels
2017
Abstract In the present study a numerical model is proposed for the response of out-of-plane loaded calcarenite masonry walls strengthened with vertical CFRP strips applied on the substrate by means of epoxy resin. A simplified structural scheme is considered consisting in a beam fixed at one end, subjected to constant axial load and out-of-plane lateral force monotonically increasing. Two different constraint conditions are taken into account: in the first one, the panel is assumed free to rotate at the top end while, in the second one, the rotation is restrained. Three-dimensional finite elements are used for the calcarenite parts and an equivalent constitutive law available in the litera…
A [Cr2Ni] coordination polymer: slow relaxation of magnetization in quasi-one-dimensional ferromagnetic chains
2018
The reaction of [Cr3IIIO(OAc)6(H2O)3]NO3·AcOH with 2-hydroxynaphthaldehyde, 2-amino-isobutyric acid and NiCl2·6H2O in MeOH, under basic and solvothermal conditions, led to the formation of the quasi-1D coordination polymer {[CrIII2NiII(L)4(MeOH)2]}n (where L = the dianion of the Schiff base between 2-hydroxynaphthaldehyde and 2-amino-isobutyric acid), which behaves as a ferromagnetic chain, displaying slow relaxation of magnetization.
Cohesive delamination and frictional contact on joining surface via XFEM
2018
In the present paper, the complex mechanical behaviour of the surfaces joining two different bodies is analysed by a cohesive-frictional interface constitutive model. The kinematical behaviour is characterized by the presence of discontinuous displacement fields, that take place at the internal connecting surfaces, both in the fully cohesive phase and in the delamination one. Generally, in order to catch discontinuous displacement fields, internal connecting surfaces (adhesive layers) are modelled by means of interface elements, which connect, node by node, the meshes of the joined bodies, requiring the mesh to be conforming to the geometry of the single bodies and to the relevant connectin…
On the thermal and thermomechanical assessment of the “Optimized Conservative” helium-cooled lithium lead breeding blanket concept for DEMO
2018
Abstract Within the framework of EUROfusion R&D activities a research campaign has been performed at CEA-Saclay, in close collaboration with the University of Palermo, in order to investigate thermal and thermomechanical performances of the “Optimized Conservative” concept of DEMO Helium-Cooled Lithium Lead breeding blanket (HCLL). Attention has been paid to the HCLL outboard equatorial module (OEM) when subjected to the steady state nominal loading scenario. To this purpose three simplified 3D models, characterized by an increasing level of detail, have been set-up taking into account, firstly, a single radial-toroidal slice, then a basic module geometric unity composed by two adjacent sli…
Labyrinthine instability of miscible magnetic fluids
2002
Abstract We consider an inhomogeneous magnetic fluid (MF), modeling a miscible MF pair, in a Hele–Shaw cell under a normal field. A linear stability analysis for the sharp straight interface (analytically) and for the diffused one (numerically) is performed. For the former case, the neutral curves and the stability diagram are found along with the critical wavelength and parameter values. Oscillatory or monotonous instabilities are shown to occur. For the diffused interface, we recognize the importance of 2D flow viscous effects along with the conventional wall friction and observe that in strong fields the dominant wavelength scales as the cell gap.
High-power pulsed dye laser with Fourier-limited bandwidth
1986
A high-peak-power, narrow-linewidth light source with a homogeneous beam profile has been constructed by modifications to a commercially available pulsed-dye-laser system. Output pulses of up to 10 mJ were generated with linewidths of about 50 MHz for 12-nsec pulses. The pulse-to-pulse frequency stability was better than the linewidth, and the center frequency could be scanned over a frequency range of 142.5 GHz at a wavelength of 600 nm. The performance of the system was demonstrated by observing the 6s2 1S0–6s7s1S0 transition in atomic mercury at 2λ = 312.8 nm and the 6s2S1/2–8s2S1/2 transition in atomic gold at 2λ = 308.9 nm using up to 1 mJ of frequency-doubled output for two-photon non…
Ascorbic Acid determination using linear sweep voltammetry on flexible electrode modified with gold nanoparticles and reduced graphene oxide
2020
Indium tin oxide (ITO) coated on flexible polyethylene terephthalate (PET) substrate electrode was modified with reduced graphene oxide and gold nanoparticles by simple co-electrodeposition performed at -0.8 V vs SCE for 200 s. All samples were characterized by electron scan microscopy. The as prepared electrode was used as electrochemical sensor to selective detection of ascorbic acid using linear sweep voltammetry. Excellent results were obtained in a linear range from 20 to 150 µM of ascorbic acid with a limit of detection of about 3.1 µM (S/N=3.3). The sensors have a reproducibility of about 5.5% and also show high selectivity towards different interferents such as chlorine, calcium, ma…
Thermal stability of ethylene copolymers with multi-alkenylsilsesquioxane comonomers synthesized by organometallic catalyst - Effect of copolymer str…
2020
Abstract This study was focused on thermal properties of ethylene copolymers with di-, tri- and tetra-alkenylsilsesquioxanes (POSS) synthesized by ansa-metallocene complex. Ethylene copolymers with multi-alkenyl POSS were characterized by different thermal behavior depending on the kind of POSS comonomer and its content, as well as the copolymer structure. The copolymers differed in the incorporation way of POSS into the polymer chain (linear and crosslinked structure), content of specific unsaturation groups, molecular weight, as well as heterogeneity of polymer chain compositions. It was found that the kind and content of unsaturation groups in E/POSS copolymers played a significant role …
Effect of Pressure and Temperature on the Local Structure and Lattice Dynamics of Copper(II) Oxide
2016
Abstract Microcrystalline and nanocrystalline (6 nm) CuO were studied in situ by the Cu K-edge X-ray absorption spectroscopy as a function of pressure (0-20 GPa) and temperature (10-300 K). Pressure dependence of X-ray absorption near edge structure (XANES) was interpreted within the full-multiple-scattering formalism based on the relaxed atomic structure determined by ab initio linear combination of atomic orbital (LCAO) calculations. Temperature dependence of the mean-square relative displacement (MSRD) for the four shortest Cu–O distances was obtained from the analysis of extended X-ray absorption fine structure (EXAFS) and described by the correlated Einstein model with the characterist…
Modeling non-linear dielectric susceptibilities of supercooled molecular liquids
2021
Advances in high-precision dielectric spectroscopy have enabled access to non-linear susceptibilities of polar molecular liquids. The observed non-monotonic behavior has been claimed to provide strong support for theories of dynamic arrest based on the thermodynamic amorphous order. Here, we approach this question from the perspective of dynamic facilitation, an alternative view focusing on emergent kinetic constraints underlying the dynamic arrest of a liquid approaching its glass transition. We derive explicit expressions for the frequency-dependent higher-order dielectric susceptibilities exhibiting a non-monotonic shape, the height of which increases as temperature is lowered. We demons…