Search results for "Loam"
showing 10 items of 76 documents
MANUAL SAMPLING AND TANK SIZE EFFECTS ON THE CALIBRATION CURVE OF PLOT SEDIMENT STORAGE TANKS
2004
In many experimental soil erosion plots, runoff is collected and carried by a conveyance system to a sequence of storage tanks. If the soil loss is measured by collecting, after mixing, samples of the stored suspension, then a calibration curve between the actual mean concentration (C) and the measured concentration (Cm) in the storage tank occurs. The aim of this article was to evaluate experimentally the factors affecting the relationship between C and Cm. For a sandy loam soil, the replicated measurements of Cm (20 samples) for two values of the actual concentration (C = 5 and 25 g/L) showed that the variability of the measurements of Cm is low and confirmed the reliability of a calibrat…
Effective run-off flow length over biological soil crusts on silty loam soils in drylands
2014
This study was undertaken in the context of the research projects PECOS (REN2003-04570/GLO) and PREVEA (CGL2007-63258/BOS), both funded by the Spanish National Plan for RD&I and by the European ERDF Funds (European Regional Development Fund), as well as the projects COSTRAS (Excellence project RNM-3614) funded by the Junta de Andalucia (Autonomous Government of Andalusia, Spain), and SCIN (Soil Crust Inter-National, PRI-PIMBDV-2011-0874, European project of ERA-NET BIODIVERSA, the Spanish team being funded by the Spanish Ministry of Economy and Competitiveness)
A field assessment of the Simplified Falling Head technique to measure the saturated soil hydraulic conductivity
2012
Abstract The Simplified Falling Head (SFH) technique to measure field saturated soil hydraulic conductivity, Kfs, has received little testing or comparison with other techniques. Different experiments were carried out to i) determine the effect of ring size on the measured conductivity; ii) compare the SFH and Pressure Infiltrometer (PI) techniques in a clay loam soil; and iii) evaluate the approach used in the SFH methodology to estimate the α* parameter. Sampling a relatively large number of sites allowed to detect statistically significant relationships between the Kfs values obtained with rings differing in diameter (0.15 and 0.30 m, respectively). The ring size effect was substantial (…
Testing infiltration run effects on the estimated water transmission properties of a sandy-loam soil
2016
Abstract Testing factors influencing determination of soil water transmission properties by an infiltrometer method helps better interpretation of the collected data and allows the development of appropriate sampling strategies for the intended use of the data. These factors include the soil water content at the start of the experiment, the height from which water is poured onto the soil surface, and the duration of the infiltration run. A sandy-loam soil was sampled with the BEST (Beerkan Estimation of Soil Transfer parameters) procedure of soil hydraulic characterization and two heights of pouring of water (0.03 and 1.5 m) under three different initial soil water content, θ i (0.12 ≤ θ i …
Wastewater Reuse Effects on Soil Hydraulic Conductivity
2004
The wastewater total suspended solids (TSS) concentration effects on the saturated hydraulic conductivity, \iK\ds, of a clay and a loam soil were investigated on laboratory repacked soil cores by a constant head permeameter. Both municipal wastewater (MW) and artificial wastewater (AW) with different TSS concentrations were used, with the aim to evaluate, by comparison, the effects of biological activity. The development of a surface sealed layer was investigated in loam soil columns supplied with AW and equipped with water manometers at different depths to detect the hydraulic head gradient changes. In the loam soil, \iK\ds reduced to about 80% of the initial value after infiltration of 17…
Estimación mediante programación genética de los patrones del suelo humectantes para el riego por goteo
2012
Drip irrigation is considered as one of the most efficient irrigation systems. Knowledge of the soil wetted perimeter arising from infiltration of water from drippers is important in the design and management of efficient irrigation systems. To this aim, numerical models can represent a powerful tool to analyze the evolution of the wetting pattern during irrigation, in order to explore drip irrigation management strategies, to set up the duration of irrigation, and finally to optimize water use efficiency. This paper examines the potential of genetic programming (GP) in simulating wetting patterns of drip irrigation. First by considering 12 different soil textures of USDA–SCS soil texture t…
Comparing two methods of analysis of single-ring infiltrometer data for a sandy–loam soil
2009
Abstract The single-ring pressure infiltrometer (PI) with the steady-state Two-Ponding-Depth (TPD) application method were developed to simultaneously determine the saturated soil hydraulic conductivity, K fs , and the α ⁎-parameter in the field. Methods of analysis of transient PI data are also available but they have received little testing so far. The transient WU method and the TPD method were compared for a sandy-loam soil. A linearization technique of the infiltration curve yielded more reliable K fs and α ⁎ results (i.e., falling within expected ranges) than a non-linear optimization technique. The WU method gave both positive and reasonable K fs and α ⁎ values for all infiltration t…
Testing different approaches to characterize Burundian soils by the best procedure
2011
Abstract The Beerkan Estimation of Soil Transfer parameters (BEST) procedure seems attractive for soil hydraulic characterization but it has received little testing so far. The objective of this investigation was to test BEST with different application approaches for some soils in Burundi, where there is the need of using simple methods to characterize soils. Most (14) of the 19 sampled sites had a clay soil texture whereas texture ranged from silty clay to loam in the other cases. On average, the fitting ability of both the particle size distribution (PSD) model (mean relative error, Me ( E r ) = 2.0%) and the cumulative infiltration model ( Me ( E r ) = 2.3%) was good according to recomme…
Response of soil phosphatase activities to contamination with two types of tar oil.
2018
Tar oil is a complex mixture of hydrocarbon compounds obtained from high-temperature distillation of coal tar. It has been used for over 100 years from now to protect wood and has been applied to wood products, primary utility poles, and railroad ties by pressure methods. Composition of the tar oil depends on the source and typically consists of 85% polycyclic aromatic hydrocarbons (PAHs), 10% phenolic compounds, and 5% heterocyclic compounds. In this research, we performed the laboratory experiment to compare two types of tar oil: C and GX-Plus, and their effects on P-cycling enzymes (phosphatases) in sandy loam and loamy sand. Tar oil was applied to soil samples at the following doses: 2,…
Field and Numerical Tests of the Two-Ponding Depth Procedure for Analysis of Single-Ring Pressure Infiltrometer Data
2013
Abstract The two-ponding depth (TPD) analysis procedure of single-ring infiltrometer data can yield invalid results, i.e., negative values of the field-saturated soil hydraulic conductivity or the matric flux potential, denoting failure of the two-level run. The objective of this study was to test the performance of the TPD procedure in analyzing the single-ring infiltrometer data of different types of soils. A field investigation carried out in western Sicily, Italy, yielded higher failure rates (40%) in two clay loam soils than in a sandy loam soil (25%). A similar result, i.e., fine-textured soils yielding higher failure rates than the coarse-textured one, was obtained using numerically …