Search results for "MAGNESIUM"
showing 10 items of 490 documents
P-recovery in a pilot-scale struvite crystallisation reactor for source separated urine systems using seawater and magnesium chloride as magnesium so…
2019
[EN] Practical recovery of a non-renewable nutrient, such as phosphorus (P), is essential to support modern agriculture in the near future. The high P content of urine, makes it an attractive source for practicing the recovery of this crucial nutrient. This paper presents the experimental results at pilot-plant scale of struvite crystallisation from a source-separated urine stream using two different magnesium sources, namely magnesium chloride and seawater. The latter was chosen as sustainable option to perform P-recovery in coastal areas. Real seawater was used to assess in a more realistic way its efficiency to precipitate P as struvite, since its composition (with noticeable concentrati…
Conditioning metallic aluminum in magnesium phosphate cements
2016
This work deals with the stabilization / solidification of radioactive waste using cement.More particularly, it aims at assessing the chemical compatibility between metallic aluminum and mortars based on magnesium phosphate cement. The physical and chemical processes leading to setting and hardening of the cement are first investigated. X-ray diffraction (XRD), thermogravimetry (TGA) and nuclear magnetic resonance spectroscopy (31P and11B MAS-NMR) arefirst used to characterize the solid phases formed during hydration, while inductively coupled plasma atomic emission spectroscopy analysis (ICP-AES), electrical conductimetry and pH measurementsprovide information on the pore solution composit…
A mathematical description accounting for the superfluous hydrogen evolution and the inductive behaviour observed during electrochemical measurements…
2018
When electrochemical techniques are used to probe the surface of corroding magnesium with the aim of obtaining quantitative information on the corrosion process, two peculiarities are generally observed: i) with anodic polarization, the rate of hydrogen evolution increases instead of decreasing and ii) during electrochemical impedance spectroscopy measurements, an inductive contribution is often observed at the low-frequency end of the spectra. The presence of these two phenomena clearly has an impact on the methodology that should be applied to correctly estimate corrosion rates from electrochemical data. The aim of this work is to provide a general mathematical description of the corrodin…
Spatial and temporal dynamics of bacterioplankton community composition in a subtropical dammed karst river of southwestern China.
2018
Abstract River damming influences the hydro‐physicochemical variations in karst water; however, such disruption in bacterioplankton communities has seldom been studied. Here, three sampling sites (city‐river section, reservoir area, and outflow area) of the Ca2+–Mg2+–HCO 3 −–SO 4 2− water type in the dammed Liu River were selected to investigate the bacterioplankton community composition as identified by high‐throughput 16S rRNA gene sequencing. In the dammed Liu River, thermal regimes have been altered, which has resulted in considerable spatial‐temporal differences in total dissolved solids (TDSs), oxidation‐reduction potential (Eh), dissolved oxygen (DO), and pH and in a different microe…
Retentive strengths of cast gold crowns using glass ionomer, compomer, or resin cement
1998
The retention forces of a newly developed compomer cement (Dyract Cem), a glass ionomer cement (Ketac Cem Aplicap), and a resin cement (F21) were examined.Cemented cast gold crowns were removed along the path of insertion with a Zwick universal testing device. The impact of both a cured and a noncured additional bonding layer that were applied to the inner surface of the crowns was examined across the Dyract Cem group.The mean adhesive strength was measured at 2.36 +/- 0.69 N/mm2 in the Ketac Cem group, at 0.60 +/- 0.28 N/mm2 in the F21 group, and at 1.85 +/- 0.94 N/mm2 in the Dyract Cem group, respectively. The application of an additional bonding layer to the inner surface of the crowns d…
Flow injection flame atomic spectrometric determination of iron, calcium, magnesium, sodium and potassium in ceramic materials by using a variable-vo…
1993
A series of different ceramic materials, such as porcelain, feldspar, kaolin, varnish, clay and stoneware have been analyzed. Iron, calcium and magnesium have been determined in these materials by flame atomic absorption and sodium and potassium by flame emission. The use of a variable-volume injector enables one to carry out these analyses in a flow system (after fusion of samples with lithium metaborate) and does not require different dilutions for the determination of each type of sample considered, nor the use of different flow injection manifolds. The developed procedure provides a limit of detection of 100 μg/l for Na, 70 μg/l for Ca, 50 μg/l for both Fe and K and 8 μg/l for Mg. The c…
Atomic-absorption spectrometric determination of calcium, magnesium and potassium in leaf samples after decomposition with molten sodium hydroxide
1991
Abstract The decomposition of standard leaf samples of varied origin and nature by fusion with sodium hydroxide in an open system has been studied. The use of sodium nitrate as an auxiliary agent facilitated the mineralization of most of the samples. The solutions obtained were analysed for calcium, magnesium and potassium by flame atomic-absorption spectrometry. The method is fast and quite precise, with absolute standard deviations of 0.04–0.13, 0.002-0.03 and 0.04–0.12% for calcium, magnesium and potassium contents of O.8-5.0, 0.13–0.48 and 0.36–2.2% respectively. The limits of detection (μg/ml) in the determination step were 0.10 for calcium, 0.011 for magnesium, and 0.09 for potassium.
GFAAS determination of selenium in infant formulas using a microwave digestion method.
1994
A method for determining the selenium content of infant formulas is proposed. It includes wet digestion with nitric acid and hydrogen peroxide in medium pressure teflon bombs in a microwave oven and determination by graphite furnace atomic absorption spectrometry (GFAAS). The absence of interferences is checked. Values obtained for the limit of detection (19.4 ng/g), precision (RSD = 2.2%) and accuracy by analysis of a reference material show that the method is reliable.
Direct FIA—AS determination of potassium and magnesium in cement samples by use of the slurries approach
1992
A direct procedure has been developed for the flame atomic determination of potassium and magnesium in cement samples. A 50-mg sample is dispersed in 25 ml of 0.13M nitric acid; 100 mul of this slurry is injected in a double channel FIA manifold simultaneously with 100 mul of a 10% (w/v) lanthanum solution. This procedure allows the rapid extraction of potassium and magnesium by leaching of the sample; nitric acid is not necessary if only potassium must be determined and the sample can be diluted with only distilled water. Aqueous standards are used. The manifold employed includes a well-stirred mixing chamber, which provides an adequate on-line dilution of the sample, in order to obtain em…
Structural properties of magnesium stearate pseudopolymorphs: effect of temperature.
2003
A thorough review of the relevant literature reveals that the interaction between water vapour and magnesium stearate, in contrast to many other metal soaps, is not properly understood. The structural modifications associated with the up-take or loss of water of vegetable-derived commercial magnesium stearate powders exposed to humid air or vacuum at room temperature are investigated using standard powder X-ray diffractometry. It is found that in such conditions magnesium stearate reacts reversibly with the vapour phase with structural consequences very similar to the high temperature transition between the crystalline and rotator phases of other anhydrous metal soaps. When temperature is i…