Search results for "MATLAB"
showing 10 items of 156 documents
Feedback linearization control of wind turbine equipped with doubly fed induction generator
2017
This paper focuses on several control techniques of a wind turbine of rated power of about 1 MW. In particular, a wind generator equipped with an asynchronous doubly-fed induction machine has been considered and its dynamic model in MATLAB/SIMULINK environment has been implemented. Starting from this model the feedback linearization control has been derived, and several simulations have been carried out, with the aim of compare its dynamic performances with the classical field oriented control, and with the V/f control. The results allow us to conclude that a DFIG controlled by a feedback linearization technique ensures better dynamic performance.
A framework to determine maximum capacity of interconnecting DGs in distribution networks
2018
Interconnecting Distributed Generation (DG) in the distribution network is considered as an important area of power system planning. When the DG placed inappropriately, the DG can have negative impact on some important and critical characteristics of system performance such as increased power losses, degraded voltage profile, and mis-coordination between protection devices. This paper introduces a framework to determine the maximum capacity limits of interconnecting DG units in radial distribution networks in order to keep protection scheme unchanged, while the voltage profile remains within acceptable range and on the same time having the minimum power losses in the network; applying this …
Performance Evaluation of a Three- Phase Five-Level Quasi-Z-Source Cascaded H-Bridge for Grid-Connected Applications
2018
In the field of the PV generation, Quasi-Z-source cascaded H-bridge (qZS-CHB) inverters are promising due to their features of modularity and high voltage conversion ratio. Thus, new topology structures and innovative modulation techniques are continuously being developed to improve the performance in terms of voltage stress and harmonic content. This paper proposes an innovative modulation technique that allows reducing the voltage stress and a specially designed grid-connected control strategy is also introduced. Through simulations in MATLAB, it has been validated that the performance of a three-phase five-level qZS-CHB is improved with the proposed solution.
Speech Intelligibility Analysis and Approximation to Room Parameters through the Internet of Things
2021
In recent years, Wireless Acoustic Sensor Networks (WASN) have been widely applied to different acoustic fields in outdoor and indoor environments. Most of these applications are oriented to locate or identify sources and measure specific features of the environment involved. In this paper, we study the application of a WASN for room acoustic measurements. To evaluate the acoustic characteristics, a set of Raspberry Pi 3 (RPi) has been used. One is used to play different acoustic signals and four are used to record at different points in the room simultaneously. The signals are sent wirelessly to a computer connected to a server, where using MATLAB we calculate both the impulse response (IR…
A Novel Symmetrical Boost Modulation Method for qZS-based CHB Inverters
2020
Quasi-Z-source cascaded H-bridge (qZS-CHB) inverters are arising as an innovation in the field of the electrical conversion for PV applications. This type of converters inherit the advantages of multilevel inverters and single-stage configuration. In this context, this paper proposes a novel symmetrical boost modulation strategy for qZS CHB multilevel inverters to increase the performance in terms of voltage stresses and power quality. The novelty lies in the adoption of a different concept to generate the shoot-through states compared to the traditional methods. Simulation analysis in a grid connected application to evaluate the benefits of this boost method is performed in the MATLAB/PLEC…
Tuning a Mamdani Fuzzy Controller with an Imperialist Competitive Algorithm
2021
We have implemented a fuzzy controller with a view to regulating a single-input and single-output second-order linear system. The fuzzy controller was a Mamdami proportional-derivative controller. To determine the parameters of the fuzzy controller we have used an imperialist competitive algorithm. This type of algorithm has a long running time so we implemented also a parallel version of the algorithm that we run on HPC Zamolxes located at the Engineering Faculty of “Lucian Blaga” University from Sibiu. Because we did not have on this computer a version of MATLAB allowing to write parallel algorithms, we implemented the entire application in the C language using the MPI library.
Efficient cluster-based routing algorithm for body sensor networks
2018
International audience; Body Sensor Networks have gained a lot of research interest lately for the variety of applications they can serve. In such networks where nodes might hold critical information about people's lives, designing efficient routing schemes is very important to guarantee data delivery with the lowest delay and energy consumption. Even though some cluster-based routing schemes were proposed in the literature, none of them offer a complete solution that guarantees energy and delay efficient routing in BSN. In this paper, we propose a robust cluster- based algorithm that increases the routing efficiency through every step of the routing process: cluster formation, cluster head…
Numerical implementation of active power flow tracing methods: Practical implications on transmission networks and DR programs support
2015
The goal of this paper is to demonstrate the powerful contribution of the electric active power flow tracing methods on studying the electric transmission systems operating conditions. The tracing methods allow to impute to every generation unit and/or load the responsibility of the power flows of all the elements connected to the network. This study propose the numerical implementation of two different tracing methods on two transmission networks through Matlab® scripts developed on purpose; then the analysis is focused on identifying the loads which mostly affect the power line flows of the system. The results of this analysis point out the loads on which the application of the Demand Res…
Matlab-based interface for the simultaneous acquisition of force measures and Doppler ultrasound muscular images
2012
This paper tackles the design of a graphical user interface (GUI) based on Matlab (MathWorks Inc., MA), a worldwide standard in the processing of biosignals, which allows the acquisition of muscular force signals and images from a ultrasound scanner simultaneously. Thus, it is possible to unify two key magnitudes for analyzing the evolution of muscular injuries: the force exerted by the muscle and section/length of the muscle when such force is exerted. This paper describes the modules developed to finally show its applicability with a case study to analyze the functioning capacity of the shoulder rotator cuff.
A Comparison of Special Bonding Techniques for Transmission and Distribution Cables
2020
In this paper, a review of the existing special bonding techniques for medium voltage (MV) and high-voltage (HV) cables is presented. Special bonding techniques have the purpose of reducing sheath currents, thereby limiting copper losses and the reduction of the ampacity of cables. The authors present a literature review to identify various bonding techniques and how these have evolved over the years thanks to new technologies. Simulations of the most used techniques have been performed in Matlab/Simulink, to compare their strengths and drawbacks.