Search results for "MCM-41"

Pore structural characteristics, size exclusion properties and column performance of two mesoporous amorphous silicas and their pseudomorphically tra…

2007

Highly ordered mesoporous silicas such as, mobile composition of matter, MCM-41, MCM-48, and the SBA-types of materials have helped to a large extent to understand the formation mechanisms of the pore structure of adsorbents and to improve the methods of pore structural characterization. It still remains an open question whether the high order, the regularity of the pore system, and the narrow pore size distribution of the materials will lead to a substantial benefit when these materials are employed in liquid phase separation processes. MCM-41 type 10 microm beads are synthesized following the route of pseudomorphic transformation of highly porous amorphous silicas. Highly porous silicas a…

Stabilization of MCM-41 by Pyrolytic Carbon Deposition

2000

A new method of surface modification which is effective in stabilizing silica grades of MCM-41 in the presence of water vapor is presented. It is shown by means of XRD, low-temperature nitrogen ads...

Pore shape affects the determination of the pore size of ordered mesoporous silicas by mercury intrusion.

2008

MCM-41 and SBA-15 micelle-templated silicas are ideal reference materials to study the effect of surface roughness on pore size measurement by mercury intrusion, as the inner surface of the mesoporous channels is much rougher in the case of SBA-15 than MCM-41. In the case of MCM-41, the pressure of mercury intrusion is related to the pore size by the classical Washburn−Laplace law, while in the case of SBA-15, the pressure of intrusion is much higher than expected and classical models underevaluate the size of the channels. Defects on the pore surface of SBA-15 affect the mercury intrusion in a similar way as the deviation from cylindrical geometry does for the pores of spongelike silica gl…

Electrochemistry of Mesoporous Organosilica of MCM-41 Type Containing 4,4′-Bipyridinium Units: Voltammetric Response and Electrocatalytic Effect on 1…

2003

The electrochemistry of a novel organic−inorganic material in which 4,4‘-bipyridinium units (BP) are covalently attached to the walls of a periodic mesoporous organisilica (PMO) of the MCM-41 type is described. The pristine material (BP@PMO), having its internal space completely filled by the cetyltrimethylammonium structure-directing agent, is almost electrochemically silent. In contrast, the extracted material obtained after removal of the structure-directing agent (BP@PMO-ex) exhibits two reduction peaks at −0.36 and −0.75 V vs AgCl/Ag in contact with aqueous electrolytes. BP@PMO-ex shows a remarkable electrocatalytic effect on the oxidation of 1,4-dihydrobenzoquinone (H2Q) that is studi…

Effect of preparation method on the properties of poly(methyl methacrylate)/mesoporous silica composites

2019

The preparation method of a polymer composite and the filler loading are amongst the factors that influence the properties of the final composites. This article studies the effect of these factors on the thermal stability and thermal degradation kinetics of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites filled with small amounts of MCM-41. The PMMA/MCM-41 composites were prepared through in situ polymerisation and melt mixing methods, with MCM-41 loadings of 0.1, 0.3, and 0.5 wt.%. The presence of MCM-41 increased the thermal stability of PMMA/MCM-41 composites prepared by melt mixing, but in the case of the in situ polymerised samples, the MCM-41 accelerated the deg…

Morphology, interfacial interaction, and thermal degradation of polycarbonate/MCM-41 (nano)composites

2017

ABSTRACTThis article reports on the morphology, interfacial interaction, thermal stability, and thermal degradation kinetics of polycarbonate (PC)/mesoporous silica (MCM-41) composites with various MCM-41 contents, prepared by melt compounding. The composites with low filler loadings (<0.3 wt%) maintained their transparency because of the well dispersed MCM-41 particles, but at higher filler loadings the composites lost their transparency due to the presence of agglomerates. The presence of agglomerates decreased the thermal stability of PC due to the reduced effectiveness of the particles to immobilize the polymer chains, free radicals, and volatile degradation products.

ChemInform Abstract: The Synthesis of Micrometer- and Submicrometer-Size Spheres of Ordered Mesoporous Oxide MCM-41.

2010

Finely Tuned Temperature-Controlled Cargo Release Using Paraffin-Capped Mesoporous Silica Nanoparticles

2011

[EN] Trapped: Mesoporous silica nanoparticles were loaded with a fluorescent guest and functionalized with octadecyltrimethoxysilane. The alkyl chains interact with paraffins, which build a hydrophobic layer around the particle (see picture). Upon melting of the paraffin, the guest molecule is released, as demonstrated in cells for the guest doxorubicin. The release temperature can be tuned by choosing an appropriate paraffin. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Spherical ordered mesoporous silicas and silica monoliths as stationary phases for liquid chromatography

2006

Ordered mesoporous silicas such as micelle-templated silicas (MTS) feature unique textural properties in addition to their high surface area (approximately 1000 m2/g): narrow mesopore size distributions and controlled pore connectivity. These characteristics are highly relevant to chromatographic applications for resistance to mass transfer, which has never been studied in chromatography because of the absence of model materials such as MTS. Their synthesis is based on unique self-assembly processes between surfactants and silica. In order to take advantage of the perfectly adjustable texture of MTS in chromatographic applications, their particle morphology has to be tailored at the microme…

Mn 12 single-molecule magnets incorporated into mesoporous MCM-41 silica

2003

Abstract The incorporation of four Mn12 derivatives, namely [Mn12O12(O2CR)16(H2O)4] (R=CH3 (1), CH3CH2 (2), C6H5 (3), C6F5 (4)), into the hexagonal channels of the MCM-41 mesoporous silica have been studied. Only the smallest clusters 1 and 2 that are those with compatible size with the pores of MCM-41 could be incorporated into the mesoporous silica. Powder X-ray diffraction (XRD) analysis and N2 adsorption–desorption isotherm experiments show that the well-ordered hexagonal structure of MCM-41 is preserved and that the Mn12 clusters are inside the pores. The magnetic properties of the MCM-41/1 nanocomposite material indicate that the structure of the cluster is maintained after incorporat…