Search results for "MECHANICAL PROPERTIES"
showing 10 items of 199 documents
Synthesis and processing of nanocrystalline tungsten carbide: Towards cemented carbides with optimal mechanical properties
2011
Abstract Nanocrystalline tungsten carbide has been obtained by reduction/carburization at low temperature from precursors obtained by freeze-drying of aqueous solutions. Nanocrystalline WC powders with a adequate content of carbon were mixed with submicrometric Cobalt powder (12 wt.%), obtained by same synthesis method, and sintered in vacuum furnace. The cemented carbides fabricated from experimental powders were compared with both commercial ultrafine and nanocrystalline WC-12Co mixtures consolidated by the same route. The synthesised powders were characterized by X-ray powder diffraction, elemental analysis and scanning and high resolution transmission electron microscopy. On the other h…
Polygalacturonate hydrogels using Fe2+ as cross-linkers : impact of the local association mode on gelation mechanisms, control of the multiscale stru…
2018
This pHD thesis describes the design of polygalacturonate hydrogels (polyGal) cross-linked by the Fe2+ cations, and their experimental characterization from the molecular scales up to the macroscopic scales, by combining EXAFS spectroscopy, Small Angle Neutron Scattering (SANS) and rheological measurements. We designed a robust gelling protocol that allowed to obtain reproducible cylindrical gels with controlled concentration gradients from the lower side to the upper side of the gel. The ratio [Fe]/[Gal] has a constant value all along the gel, which demonstrate that the Fe2+ cations are associated with 4 galacturonate units. The comparison of EXAFS measurements and molecular dynamics simul…
Multi-functional hindered amine light stabilizers-functionalized carbon nanotubes for advanced ultra-high molecular weight Polyethylene-based nanocom…
2015
Hindered Amine Light Stabilizer (HAS) molecules have been covalently linked on the outer surface of multi-walled carbon nanotubes (CNTs), and the so-obtained multi-functional fillers (HAS-f-CNTs) have been compounded with Ultra High Molecular Weight Polyethylene (UHMWPE) to get composite films. The success of the grafting reaction of the HAS molecules has been confirmed through spectroscopic and thermo-gravimetric analyses. Morphological analyses reveal a segregated microstructure, in which CNT-rich channels surround the polymer domains. This morphology results in improved mechanical properties and appreciable electrical conductive features. More importantly, the addition of only 1 wt.% of …
Pulsatile protein release and protection using radiation-crosslinked polypeptide hydrogel delivery devices
2011
Abstract In the recent years recombinant technology has identified numerous protein based therapeutics. Their effective delivery, though, can be challenging due to the poor stability of most proteins along their pathway to the target site in the body. Hydrogels have been identified as good candidates for protein encapsulation and delivery thanks to both material and manufacturing process advantages. In this work we propose high energy irradiation as a synthetic methodology of choice to engineer hydrogel-based delivery devices for encapsulation and pulsatile release of proteins, triggered by pH, and for prevention of their denaturation when encapsulated. In particular, maleic anhydride funct…
“Effect of Filler Type and Processing Apparatus on the Properties of the Recycled “Light Fraction” from Municipal Post-Consumer Plastics”
2001
Plastic waste or scraps are generated from two main sources: industrial wastes and post-consumer wastes. By using the flotation method, generally two fractions are obtained from municipal post-consumer wastes: a light fraction, floating on water, and a heavy fraction. The former is essentially made of low and high density polyethylene—LDPE, HDPE—and polypropylene—PP; the heavy fraction is formed by poly(vinyl chloride)—PVC—and poly(ethylene terephthalate)—PET. In this work, the recycling of a light fraction from municipal post-consumer plastics has been studied, considering also the effect of filler type—glass fibres, calcium carbonate and wood fibres—and processing apparatus—discountinous …
Effect of the processing on the properties of biopolymer based composites filled with wood flour
2008
Wood-polymer composites (WPCs) are well known today in the field of industrial applications, because of several advantages they can grant if compared with mineral filler-polymer composites. These advantages regard the low cost of wood based fillers, the reduced specific weight, the lower hazards for production workers in case of inhalation, the special aesthetic features, environmental issues. The scientific literature reports studies regarding polymer matrices like, for instance, polyethylene and polypropylene, in combination with several natural-organic fillers. However, a limit of these composites is represented by the fact that there is not a full biodegradability: this, in fact, regard…
Multifunctional polyurethane foams with thermal energy storage/release capability
2020
In this work, polyurethane (PU) insulating panels containing different amounts of a microencapsulated paraffin with a nominal melting temperature of 24 °C, used as phase change material (PCM), were produced. The resulting panels behaved as multifunctional materials able to thermally insulate and simultaneously storing/releasing thermal energy near room temperature. The panels were characterized from a microstructural, thermal and mechanical point of view. Viscosity measurements highlighted an increase in the viscosity values of the PU liquid precursors due to the addition of the capsules, and this could lead to some difficulties during the production stages, especially in the mixing and foa…
Influence of the e-beam irradiation and photo-oxidation aging on the structure and properties of LDPE-OMMT nanocomposite films
2012
Abstract In this paper two systems, polyethylene (LDPE) and polyethylene/commercial organo-modified montmorillonite (LDPE/OMMT) nanocomposite, were subjected to e-beam irradiation at different doses and both the molecular modifications and mechanical properties have been investigated through solubility, FT-IR, calorimetric and tensile tests. Moreover, in some of the irradiated systems photo-oxidation aging was performed and its effects were studied. The results show an enhancement with irradiation of the positive effect of the nano-filler loading, related to the increase of the mechanical properties, due to the increase of the nano-filler polymer interaction. Nevertheless calorimetric and F…
Are control of extracellular acid-base balance and regulation of skeleton genes linked to resistance to ocean acidification in adult sea urchins?
2020
SCOPUS: ar.j
Effect of the construction process on the performances of asphalt paving mixes with crumb rubber from scrap tires
2004
This paper presents the results of an experimental study on the use of CRM (Crumb Rubber Modifier) in bituminous mixtures for asphalt pavements, using a Dry Process. Employing experimental methods capable of ensuring that the mixtures obtained and the stress conditions that they undergo in pavements are representative, we clarify some aspects relating to the design and production of mixtures; we also show the effects of the bitumen-rubber interaction on mechanical performances (fatigue resistance and rutting). Among the various factors involved in manufacture, a particular investigation was carried out on the effects of asphalt content, mixing temperatures and mixture compaction. The experi…