Search results for "MICI"
showing 10 items of 1671 documents
Co3O4 particles grown over nanocrystalline CeO2: influence of precipitation agents and calcination temperature on the catalytic activity for methane …
2015
Crystalline cobalt oxides were prepared by a precipitation method using three different precipitation agents, (NH4)(2)CO3, Na2CO3 and CO(NH2)(2). Cobalt oxide nanoparticles corresponding to a Co3O4 loading of 30 wt% were also deposited over high-surface area nanocrystalline ceria by the same precipitation agents. The effect of calcination temperature, 350 or 650 degrees C, on the morphological and structural properties was evaluated. Characterization by BET, XRD, SEM, TEM, Raman spectroscopy, H-2-TPR, XPS and NH3-TPD was performed and the catalytic properties were explored in the methane oxidation reaction. The nature of the precipitation agent strongly influenced the textural properties of…
Photocatalytic CO2 reduction in gas–solid regime in the presence of H2O by using GaP/TiO2 composite as photocatalyst under simulated solar light
2014
GaP/TiO2 composites exhibited a remarkable photocatalytic activity for CO2 reduction in the presence of water vapor producing methane. By decreasing the GaP:TiO2 mass ratio an increase in the photocatalytic activity of the composite was observed for up to a 1:10 mass ratio. The photocatalytic activity of the composite can be attributed to the band structures of the solids as well as to the efficient charge transfer between GaP and TiO2 heterojunction.
Numerical simulations of the dependency of flow pattern on impeller clearance in stirred vessels
2001
The flow and turbulence fields in a fully baffled vessel stirred by a Rushton turbine have been simulated by means of computational fluid dynamics (CFD) techniques. The simulation techniques adopted (the "Sliding-grid" and "Inner-outer" methods) are fully predictive and require no experimental data as boundary or initial conditions. The effect of clearance (C) on the flow patterns in stirred vessels was simulated as the flow field transition observed can be considered a particularly stringent benchmark for the testing of CFD techniques. The results are compared with previously obtained LDA data and show that the double- to single-loop transition experimentally observed when impeller clearan…
Structure-property relationships in aromatic thioethers featuring aggregation-induced emission : Solid-state structures and theoretical analysis
2019
We describe in this paper a structure–property relationship study of aromatic thioethers with aggregation-induced emission (AIE) properties. We combine a structural analysis based on geometrical consideration with an in-depth analysis of the crystalline packing supported by quantum mechanical calculations. Our results allow us to correlate the enhanced fluorescence quantum yields with the significant increase of C–H⋯π and the decrease of π⋯π interactions in the solid state – a result which supports the well-accepted AIE mechanism quantitatively.
Experiments and CFD Predictions of Solid Particle Distribution in a Vessel Agitated with Four Pitched Blade Turbines
2001
The distribution of solid particles in a high aspect-ratio baffled tank agitated with four 45° pitched blade turbines (PBT) was investigated using both experimental measurements and CFD simulations. Dilute suspensions of glass beads in water and moderately viscous liquids were considered. The measurement of axial particle concentration profiles was conducted by means of a light attenuation technique. Fully predictive simulations of solid-liquid suspensions were performed using a Sliding-Grid approach coupled with the Eulerian-Eulerian Two Fluid Model and the ‘homogeneous’ two-phase k-ɛ turbulence model. The simulated particle axial concentration profiles were compared with the experimental …
Fixed Bed Adsorption of Drugs on Silica Aerogel from Supercritical Carbon Dioxide Solutions
2013
Supercritical adsorption coupled with the high adsorption capacity of silica aerogel allows the preparation of a new kind of delivery systems of poor water soluble drugs. In order to overcome drawbacks of conventional techniques where the use of liquid solvents can cause the fracture of aerogel porous structure, in this work a new adsorption process of drugs from a supercritical mixture is proposed. Adsorption takes place from a fluid solution of the drug in supercritical CO2and ethanol as cosolvent. A fixed bed adsorption plant has been developed to allow fast mixing of fluid phase and effective contact in the adsorption column. The use of ethanol as cosolvent allows to overcome the limita…
Nimesulide adsorbed on silica aerogel using supercritical carbon dioxide
2012
Silica aerogel (SA) was loaded with nimesulide, a drug model compound, to demonstrate the potentiality of adsorption processes based on the usage of supercritical carbon dioxide to treat poorly water-soluble drugs, forming new kinds of drug delivery systems. Adsorption isotherms and kinetics were measured and described by models. The effect of pressure, temperature and solution concentration on loaded SA were also studied. Modelling of kinetic data showed that the sorption process was best described by a pseudo-second-order model. The adsorption isotherm data were best fitted by the Freundlich isotherm. The drug/SA composites were characterized using scanning electron microscopy, X-ray micr…
Influence of sol counter-ions on the visible light induced photocatalytic behaviour of TiO2 nanoparticles
2014
Titanium dioxide (TiO2) nanoparticles are attracting increasing interest because of their superior photocatalytic and antibacterial properties. Here, aqueous titanium oxy-hydroxide sols were made, using a green synthesis method, from the controlled hydrolysis/peptisation of titanium isopropoxide. Three different mineral acids were used to peptise the sol (HNO3, HBr and HCl), and provide counter-ions. The influence of nitrate or halide sol counter-ions on size distributions of the starting sols were measured via photon correlation spectroscopy (PCS). Semi-quantitative phase composition analysis (QPA), on the gels thermally treated at 450 and 600 degrees C, was carried out via Rietveld refine…
Characterization and photoactivity of coupled ZnO-ZnWO4 catalysts prepared by a sol-gel method
2014
Abstract ZnO–ZnWO4 nanocomposites were synthesized by a novel sol–gel method and characterized through X-ray diffraction, BET specific surface area analysis, UV–Vis diffuse reflectance spectroscopy, scanning electron microscopy and transmission electron microscopy. The photocatalytic activity of the samples was evaluated using the degradation of 4-nitrophenol under UV light as probe reaction. The ZnO/ZnWO4 molar ratio was varied in order to study its influence on the photoefficiency of the mixed samples. The ZnO–ZnWO4 nanocomposites showed higher photoactivity than ZnO and ZnWO4. The high efficiency of the mixed samples was explained by the coupling and the intimate contact of two different…
Effects of weathering on the performance of self-cleaning photocatalytic paints
2019
Abstract The use of photocatalytic products for the surface coating of buildings is spreading more and more, because of the reduction of atmospheric pollutants and the colour maintenance of the paints over time with reduction of the maintenance costs and the improvement of the aesthetic appearance. The study reports the evaluation of the effects of the atmospheric conditions on three commercial photocatalytic paints containing TiO2. In particular tests were carried out by using samples subjected to accelerated aging inside a climate chamber and naturally aged by exposure for two years to the external environment of the city of Palermo (representative of a coastal environment of the Mediterr…