Search results for "MICROSTRUCTURE"
showing 10 items of 707 documents
Pyroxene-based glass-ceramics as glazes for floor tiles
2005
Abstract Crystallization of a glass with composition in the diopside primary crystallization field in the MgO–CaO–Al 2 O 3 –SiO 2 quaternary system was investigated. Also the action of some additives, nucleants and fluxes, in the pyroxene development was examined. Glasses were prepared by conventional melting of a mixture of raw materials and cooled by pouring in water. Pellets of glass powder specimens were thermally treated at several temperatures up to 1200 °C. The crystallization path was followed by X-ray diffraction powder (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDX). The results proved that, in addition to the effect of B 2 O 3 and TiO 2 in…
Effect of NiO and/or TiO2 mullite formation and microstructure from gels
1998
Polymeric and colloidal gels with a constant molar ratio of (Al+Ni and/or Ti)/Si=3/1 and various (Al/Ni and/or Ti) ratios (up to 21.42 mol% NiO+TiO2) were prepared and used to study the effect of the precursor chemical homogeneity on mullite formation processes and the resulting microstructure. Both kinds of gel precursors were preheated at 750°C for 3 h in order to obtain appropriate gel-derived glasses for further thermal processing. After annealing for several time periods at temperatures between 750 and 1500°C, differences in crystallization pathways were observed. Polymeric gels crystallized Al–Si and NiAl2O4 spinels from the amorphous form at temperatures in the range between 900 and …
Influence of Joint Geometry on Micro and Macro Mechanical Properties of Friction Stir Spot Welded Joints
2014
AbstractSpot welding can be considered a very common joining technique in automotive and transportation industries as it permits to obtain effective lap-joints with short process times and what is more it is easily developed through robots and automated systems. Recently, Friction Stir Spot Welding (FSSW) has been proposed as a natural evolution of the already known Friction Stir Welding (FSW) process, allowing to obtain sound spot joints that do not suffer from the insurgence of typical welding defects due to the melting of the base material. Similarly to FSW, both geometrical and technological parameters must be considered as they affect the material flow and the heat flux generated durin…
Reactive direct current magnetron sputtered TiO2 thin films with amorphous to crystalline structures.
2008
International audience; TiO2 thin films were deposited on soda–lime glass substrates by reactive direct current magnetron sputtering in a mixture of pure argon and oxygen. The influence of both the deposition time, td, and the post-annealing treatments on the films morphology, composition and structure was analyzed by scanning electron microscopy, ellipsometry, X-ray photoelectrons spectroscopy, X-ray diffraction (XRD) and Raman spectroscopy. Amorphous TiO2 was obtained for the shortest deposition time, td=15 min. Increasing td up to 30 min, poorly crystallized anatase and rutile phases were formed together with amorphous TiO2, as was revealed by complementary XRD patterns and Raman spectra…
Hydrothermal-mediated synthesis of orange Cr, Sb-containing TiO 2 nano-pigments with improved microstructure
2017
Abstract A hydrothermal-mediated via was developed to prepare discrete, non-aggregated Cr,Sb-doped rutile nano-pigments. After annealing the Cr- and Sb-containing TiO2 anatase nanocrystals obtained by hydrothermal aging the nano-pigments Cr,Sb-TiO2 were characterized with the aid of X-ray diffraction (XRD) including lattice parameter and crystallite size determination, Raman spectroscopy, field emission scanning and transmission electron microscopies (FESEM and TEM, respectively) including energy-dispersive X-ray (FESEM/EDX) spectroscopy, high resolution transmission electron microscopy (HRTEM) including selected area electron diffraction (SAED), ultraviolet–visible diffuse reflectance (UV–…
Electrochemical Investigation of Lithium Intercalation in MOCVD Derived Nanostructured Anatase/Rutile TiO2
2011
In this paper we report on the lithium reversible storage in titanium dioxide (TiO2) prepared by metal-organic chemical vapor deposition (MOCVD). Electrochemical properties in terms of lithium reversible insertion depend on the deposited microstructure. For thick films deposited on silicon wafer electrochemical activity of the anatase type of TiO2 is registered in the potential range 1.8-2.1 V vs. Li. For thinner films the intercalation reaction takes place in two potential ranges: 1.8-2.1 V vs. Li and below 1.4 V vs. Li. The second electroactivity range is attributed to lithium insertion into rutile. We found that the decrease of the lower potential limit (0.5 V instead of commonly used 1 …
Influence of Physical Treatments on the Potato Starch Granules Micro- and Ultrastructure
2012
In this research, potato starch was subjected to ph ysical treatments in order to analyse the changes at the micro- and ultrastructural levels an d finally to identify the optimal conditions for disintegrating the starch granules. For the analysi s, 10% aqueous solutions of potato starch were treated with a) microwaves; b) heat and c) heat com bined with ultrasounds. For each treatment type, the duration was 5 minutes, excepting the microwave treatment, where the time was 1 and 5 minutes; heat power varied from 180W to 900W at the tests with microwave, temperature varied between 65 o C and 100 o C in the thermal experiments and at the thermal ana lysis combined with ultrasounds temperature …
Synthesis of new molybdenum–tungsten, vanadium–tungsten and vanadium–molybdenum–tungsten oxynitrides from freeze-dried precursors
2004
Abstract Interstitial molybdenum–tungsten, vanadium–tungsten and vanadium–molybdenum–tungsten oxynitrides in the solid solution series Mo1−zWz(OxNy) and V1−zWz(OxNy) (z=0, 0.2, 0.4, 0.5, 0.6, 0.8, 1), and V1−u−zMouWz(OxNy) (u, z=0.2, 0.33, 0.4, 0.6; u+z
Shell matrices of recent rhynchonelliform brachiopods: microstructures and glycosylation studies.
2007
ABSTRACTLike most metazoan biomineralisations, the brachiopod shell is the end product of a biologically controlled calcification process. The main agent of the control is the extracellular matrix, which is secreted by the outer mantle epithelium. This matrix mediates the calcification process by allowing crystal nucleation and elongation in specific orientations and finally, by stopping crystal growth. The proteinaceous moiety of brachiopod shell matrices has been extensively studied. Less known are the post-translational modifications that occur in these matrices, in particular glycosylations. In this comparison of five species of Recent articulated brachiopods, the ratio of soluble to in…
EUA and sCER Phase II Price Drivers: Unveiling the reasons for the existence of the EUA-sCER spread
2011
International audience; This article studies the price relationships between EU emissions allowances (EUAs) - valid under the EU Emissions Trading Scheme (EU ETS) - and secondary Certified Emissions Reductions (sCERs)--established from primary CERs generated through the Kyoto Protocol's Clean Development Mechanism (CDM). Given the price differences between EUAs and sCERs, financial and industrial operators may benefit from arbitrage strategies by buying sCERs and selling EUAs (i.e. selling the EUA-sCER spread) to cover their compliance position as industrial operators are allowed to use sCERs towards compliance with their emissions cap within the European system up to 13.4%. Our central res…