Search results for "MIDI"
showing 10 items of 1431 documents
Effect of Processing Conditions on the Degradation and on the Recycling of Polycarbonate
2003
Polycarbonate, like other polycondensation polymers, can be easily recycled without significant loss of properties only with careful drying. Indeed, the presence of humidity strongly decreases the molecular weight of the polymer by hydrolytic chain scission. In this paper, the degradation and the recycling of an extrusion grade polycarbonate sample has been investigated considering mainly the effect of the humidity. Some degradation is observed also for the material reprocessed in dry conditions and due to the thermomechanical stress acting on the melt. The chain scission is strongly reduced if the processing is carried out under nitrogen flow. In these conditions less degradation effects …
Recycling of dry and wet polyamide 6
2002
Recycling of polycondensation polymers can give rise to secondary materials with good mechanical properties only if a careful drying is carried out before the melt reprocessing operations. The presence of humidity provokes the hydrolytic chain scission of the macromolecules and the consequent decrease of molecular weight and properties. In this work, the drying step was substituted by the addition of an antioxidant that is able to protect the macromolecules because it is the autioxidant is more prone to hydrolysis, thus removing the water from the melt. The mechanical properties of polyamide 6 reprocessed more times in wet conditions and in the presence of this stabilizer are even better th…
Adsorption of water vapor by poly(styrenesulfonic acid), sodium salt: isothermal and isobaric adsorption equilibria
2004
Abstract Air conditioning and dehumidifying systems based on sorption on solids are of great interest, especially in humid climates, because they allow reduction of thermal loads and use of chlorofluorocarbons. Previous studies have shown that hydrophilic polymers such as sulfonic polymers can have very high performance in water adsorption from air. The aim of this study was to characterize the water vapor adsorption properties of fully sulfonated and monosulfonated poly(styrenesulfonic acid), sodium salt, and to elucidate the mechanism of adsorption on these materials. Adsorption isotherms have been determined by TGA between 298 and 317 K for pressures ranging from 0.1 to 45 hPa. They have…
2-Acylamino- and 2,4-bis(acylamino)pyrimidines as supramolecular synthons analysed by multiple non-covalent interactions. DFT, X-ray diffraction, and…
2012
Intermolecular interactions of ten 2-acylamino and 2,4-bis(acylamino)pyrimidines (7 of which are previously unknown) have been investigated by X-ray structural, quantum chemical (DFT), and NMR spectral methods. Especially the concentration dependencies of the (1)H NMR chemical shifts and titrations with other molecules capable of multiple hydrogen bonding provided useful information regarding their association via triple or quadruple hydrogen bonding, which is controlled by the conformational preferences of 2-acylamino- and 2,4-bis(acylamino)pyrimidines. On comparison of the properties of 2-acylamino- and 2,4-bis(acylamino)pyrimidines with the corresponding pyridines, an additional nitrogen…
Degradable cationic nanohydrogel particles for stimuli-responsive release of siRNA.
2014
Well-defined nanogels have become quite attractive as safe and stable carriers for siRNA delivery. However, to avoid nanoparticle accumulation, they need to provide a stimuli-responsive degradation mechanism that can be activated at the payload's site of action. In this work, the synthetic concept for generating well-defined nanohydrogel particles is extended to incorporate disulfide cross-linkers into a cationic nanonetwork for redox-triggered release of oligonucleotide payload as well as nanoparticle degradation under reductive conditions of the cytoplasm. Therefore, a novel disulfide-modified spermine cross-linker is designed that both allows disassembly of the nanogel as well as removal…
Environment Humidity Effect on the Weight of Carbonized Na-Al-Si Glass Fabrics Recovery after Heating
2015
Na-Al-Si glass fabrics fibres contain Na+ ions that diffuse to its surface and along with CO2 and H2O from atmosphere create here the shell of carbonate hydrates. The heating of fabric leads to weight loss by evolving these substances. In this work the results of weight recovery study at room relative humidity (20% – 50%) and elevated humidity (near 70%) of fabrics after its heating at different temperatures (70°C – 150°C) are compared. The experiments shoved the different weight recovery kinetics. The initial exponential stages up to 0.3 h – 0.5 h of the both recoveries are associated with water absorption and differ by its levels. In a case of lower environment humidity the later weight i…
Methylcellulose-Based Edible Films and Coatings: 2. Mechanical and Thermal Properties as a Function of Plasticizer Content
1997
Several edible films based on methylcellulose and polyethylene glycol 400 (PEG400) were prepared and stored until equilibration at different relative humidities. Tensile stress−strain curves show very different behaviors as a function of PEG400 and relative humidity. Tensile strength strongly depends on relative humidity and then on water content, more than on PEG400 content. On the contrary, elongation is dependent both on water and PEG400. These differences correspond to the glass transition of the polymer, which affects the elongation more than the tensile strength. However, from DSC measurements, it appears that the PEG400 has no or a very low compatibility with the methylcellulose matr…
Characterization of monopolymer blend of virgin and recycled polyamide 6
2002
It is a common industrial practice to blend virgin polymer with the same recycled polymer coming from plastic scraps that, in general, has not undergone relevant degradation. In this work, the characteristics of blends of virgin and recycled polyamide have been considered by changing the amount of recycled polymer and the presence of humidity and a stabilizer. Neither dry nor wet stabilized recycled polyamide samples show significant variations of the molecular weight, but the melt Newtonian viscosity of the blends are slightly different from that predicted by an additive rule, despite the same chemical nature of the two components. This holds true even more for the humid unstabilized sampl…
“Click” on PLGA-PEG and hyaluronic acid: Gaining access to anti-leishmanial pentamidine bioconjugates
2017
Pentamidine (Pent), an antiparasitic drug used for the treatment of visceral leishmaniasis, has been modified with terminal azide groups and conjugated to two different polymer backbones (PLGA-PEG [PP] copolymer and hyaluronic acid [HA]) armed with alkyne end-groups. The conjugation has been performed by Copper Catalyzed Azido Alkyne Cycloaddition (CuAAC) using CuSO4 /sodium ascorbate as metal source. The novel PP-Pent and HA-Pent bioconjugates are proposed, respectively, as non-targeted and targeted drug delivery systems against Leishmania infections. Moreover, Pent has been encapsulated into PP nanoparticles by the oil-in-water emulsion method, with the aim to compare the biological activ…
EFFECT OF MOISTURE ON THE BULK PROPERTIES OF SALTED POLY(CAPROAMIDE).
1980
The glass-transition temperature (Tg) and the elastic modulus of nylon-6 and its mixtures with 4% w/w LiCl and with 2% LiCl+3% LiBr were investigated. In one set of experiments care was taken to avoid absorption of moisture during the measurements. In another set of experiments, samples were exposed to atmospheric humidity for different lengths of time. Both unoriented and oriented specimens were investigated. The presence of 4% LiCl almost doubles the amount of moisture absorbed at equilibrium by nylon-6. The Tg was found to be greatly affected by the moisture content and by salt type. When strict precautions to exclude moisture are taken, the addition of 4% LiCl raises the Tg of nylon-6 b…