Search results for "MINERALOGY"

Control of grain size and morphologies of nanograined ferrites by adaptation of the synthesis route: mechanosynthesis and soft chemistry

2003

Abstract Nanocrystalline Fe-based spinels with composition Fe 2.5 Ti 0.5 O 4 can be synthesized using two different routes: soft chemistry and high-energy ball milling. This paper is focussed on the fact that each type of synthesis process can lead to powders with a crystallite size of about 15 nm but with significant differences in the grain size distribution and the agglomeration state. Whereas in the case of mechanosynthesis, the ball-milled powders consist of aggregates, those obtained by soft chemistry are very well dispersed. Moreover the chosen investigated nanopowders present a blocked/superparamagnetic transition depending on the grain size. The grain size morphologies obtained by …

Dispersions of Nanoclays of Different Shapes into Aqueous and Solid Biopolymeric Matrices. Extended Physicochemical Study

2010

Dispersions of nanofillers into aqueous and solid biopolymeric matrices were studied from the physicochemical viewpoint. This work was carried out based on the idea that the combination of biopolymers, derived from renewable resources, and nanofiller, environmentally friendly, may form a new generation of nanomaterials with excellent and unique properties at low cost. To this purpose, two pectins with different degrees of methyl esterification and nanoclays like halloysite and laponite RD were selected. The thermodynamic and structural studies on the aqueous mixtures of pectin and nanoclay were able to discriminate the interactions, which control the adsorption of pectin onto the filler and…

Shear characterization of CaCO3-filled linear low density polyethylene

1988

Shear properties of CaCO3-filled linear low density polyethylene have been determined over a wide range of filler loading. The viscosity rises with the filler loading especially at low shear rates and a yield value appears for CaCO3-contents larger than 5%. The decrease of the die-swell ratios of the filled samples indicates a reduction of the melt elasticity.

Synthesis of a Hydrothermally Stable, Periodic Mesoporous Material Containing Magnetite Nanoparticles, and the Preparation of Oriented Films

2006

Magnetite nanoparticles modified covalently with triethoxysilane having a quaternary dicetyl ammonium ion are used together with tetraethylorthosilicate as building blocks to prepare a mesoporous material. Cetyltrimethylammonium bromide is used as a structure-directing agent under conditions typically used for mesoporous MCM-41 silicas. The resulting mesoporous material (MAG-MCM-41), containing up to 15 wt % of magnetite is characterized by transmission electron microscopy (TEM), isothermal gas adsorption, and X-ray diffraction. In contrast to siliceous MCM-41, mesoporous MAG-MCM-41 exhibits a remarkable hydrothermal stability. The magnetic properties of MAG-MCM-41 are characterized by DC a…

Effect of additives on the crystallization of cordierite-based glass-ceramics as glazes for floor tiles

2003

Abstract The effect of several additives such as fluxes and/or nucleants on a parent glass with composition located in the primary field of cordierite within the quaternary system CaO–MgO–Al 2 O 3 –SiO 2 has been examined. Crystallization path of glasses was determined by differential thermal analysis (DTA) and X-ray powder diffraction (XRD). Pressed pellets of powdered glasses containing different additives were submitted at thermal treatments up to 1200 °C. The microstructural development at several temperatures was followed by field emission scanning electron microscopy and energy-dispersive X-ray analysis. The results shown that additions of TiO 2 as nucleant and/or B 2 O 3 as flux to a…

Enhanced surface area in thermally stable pure mesoporous TiO2

2000

Abstract We describe here for the first time the surfactant-assisted synthesis of thermally stable mesoporous pure TiO 2 having a high surface area. Our synthetic approach to the chemistry of this system is based on the equilibrium between the hydrolysis and condensation reactions of the inorganic species and the organic–inorganic self-assembling processes. The use of titanatrane complexes helps to retard the hydrolysis and condensation reactions, thus allowing us to overcome the difficulties in preparing titanium dioxide mesoporous materials starting from highly reactive Ti-alkoxides. The mesoporous material has been characterized by TEM, XRD and N 2 adsorption–desorption isotherms and dis…

Crystallization behaviour and microstructural development in ZrSiO 4 and V-ZrSiO 4 solid solutions from colloidal gels

2000

Abstract Zircon and vanadium-doped zircon blue pigments were prepared by heat treatment of gel precursors. Gels with nominal compositions Vx-ZrSiO4 with x=0.0, 0.002, 0.004, 0.02 and 0.2 were prepared by formation of a silica coating on zirconia colloidal particles previously obtained. The crystallization behavior and microstructural evolution were studied using X-ray powder diffraction (XRD), energy dispersive X-rays microanalysis (EDX), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). The results indicated that the vanadia loading in the precursor gels speeds up the crystallization of the vanadium-co…

Characteristics of LiFePO4 obtained through a one step continuous hydrothermal synthesis process working in supercritical water

2009

International audience; The olivine-like material LiFePO4 was prepared via a continuous hydrothermal synthesis process working from subcritical to supercritical water conditions. The influence of some processing parameters–temperature and reaction time–was investigated in terms of material purity, grain size and morphology. Supercritical conditions were found to be attractive to synthesize in one step a well-crystallized material without impurities. The primary particles size was in the nanometric range. They showed a natural tendency to form micron size agglomerates, which were supposed to be the cause of the limited capacity, as demonstrated through a cross study using laser particle size…

Raman Mapping Applied to Reveal Internal Structures of Natural Minerals

2003

Effect of latex on surface structure and wetting of pigment coatings

2010

Abstract The amount and type of latex binder has a significant effect on both the structure and chemical properties of pigment coatings, which affects critical surface properties, e.g., gloss, ink setting rate via liquid absorption, and spreading properties. Increased knowledge is required for improved optimization in practical applications of pigment coating layers. To this end, the effect of binder amount for two different styrene–butadiene latices in kaolin pigment coatings on a base paper was studied, by measuring the surface topography, surface chemistry, and liquid absorption of these coatings. The topography was thoroughly analyzed from nanometer to millimeter length scales by atomic…