Search results for "MOLA"
showing 10 items of 1216 documents
Bond strength and elemental analysis of oxidized dentin bonded to resin modified glass ionomer based restorative material
2019
Background This study aimed to investigate the influence of hesperidin application on the bonding of resin-modified glass ionomer-based restorative material to dentin treated with oxygen-induced endodontic irrigants. Material and Methods One hundred human permanent molars were categorized into five groups (n= 20/group), treated with various irrigants as follows: Group C; distilled water (control group), Group SH; 5.25% NaOCl, Group SH+H; 5.25% NaOCl + 5 % hesperidin, Group HP; 10% H2O2, Group HP+H; 10% H2O2 + 5 % hesperidin. Specimens were bonded with RMGI based restorative material. For each group, half of the specimens were evaluated for µSBS by a universal testing machine and the other h…
Assessment of shear bond strength and microleakage of fissure sealant following enamel deproteinization : an in vitro study
2020
Background To evaluate the effect of two different deproteinizing agents (5.25% sodium hypochlorite and Papacarie®) prior to acid etching on the shear bond strength and microleakage of a fissure sealant material. Material and methods A total of 123 extracted noncarious human third molar teeth were randomly divided into three groups for each test: acid etching alone (control) (C), sodium hypochlorite (NaOCl), and Papacarie Duo® (PC). The shear bond strength tests were performed using a universal testing machine, and microleakage was evaluated using a dye penetration method. Results The mean shear bond strength values obtained in Group C were significantly lower than those of Group NaOCl and …
Influence of the volume of restorative material on the concentration of stresses in the restorative interface.
2020
Background To evaluate the microtensile strength in the adhesive interface depending on the volume of the composite resin used to restore class I cavities. Material and Methods Forty-eight human third molars received a standardized class I cavity preparation and they were separated into six experimental groups: G1 - single-bottle adhesive system; G2 - bonding system with load; G3 - single-bottle adhesive associated with low-viscosity composite resin; G4 - loaded adhesive associated with low-viscosity composite; G5 - resin-modified glass ionomer associated with single-bottle adhesive; and G6 - resin-modified glass ionomer associated with loaded adhesive. All cavities were restored with a uni…
Durability of solvent-free one-step self-etch adhesive under simulated intrapulpal pressure
2015
Background: There are different solvents presented in simplified adhesives. Bond-1 SF has been developed, which contains neither water nor organic solvents, in order to eliminate technical issues in terms of evaporation of solvents and concerns for the durability of resin-dentin bond. Thus this study was conducted to evaluate the microtensile bond strength (μTBS) of solvent-free and ethanol-based one-step self-etch adhesives to dentin under simulated intrapulpal pressure (IPP). Material and Methods: Occlusal surfaces of human molars were prepared to expose mid-dentin depth. Bond-1SF Solvent-Free SE [SF] and Adper TM easy one [AE] adhesives were applied on dentin specimens. Resin composite b…
The effect of bacterial cellulose nanocrystals on the shear bond strength of resin modified glass ionomer cement to dentin
2020
Background The present study aimed to investigate the effect of bacterial cellulose nanocrystals (BCNC) on the shear bond strength (SBS) of resin modified glass ionomer cement (RMGIC) to dentin. Material and Methods A total of 48 freshly extracted intact third molars were randomly divided into four main groups with three different concentrations (0.3%, 0.5% and 1% wt) of BCNC with RMGIC and control group without BCNC. These specimens were kept in distilled water at 37° C for 24h. Shear bond strength was examined, using the universal testing machine. Kruskal-Wallis test and Dunn`s post-hoc test were applied for analysis of data. P<0.05 was considered as the level of significance. Results The…
Evaluation of the agreement by examiners according to classifications of third molars
2011
Objectives. This study recorded and evaluated the intra- and inter-group agreement degree by different examiners for the classification of lower third molars according to both the Winter’s and Pell & Gregory’s systems. Study Design. An observational and cross-sectional study was realized with forty lower third molars analyzed from twenty digital panoramic radiographs. Four examiner groups (undergraduates, maxillofacial surgeons, oral radiologists and clinical dentists) from Aracaju, Sergipe, Brazil, classified them in relation to angulation, class and position. The variance test (ANOVA) was applied in the examiner findings with significance level of p<0.05 and confidence intervals of 95%. R…
Comparative cariostatic efficacy of a novel Nano-silver fluoride varnish with 38% silver diamine fluoride varnish a double-blind randomized clinical …
2019
Background To evaluate the clinical cariostatic efficacy of a concocted 5% Nano-silver incorporated Sodium fluoride (NSSF) dental varnish with 38% Silver diamine fluoride (SDF) in preventing the progression of dentinal caries of primary molars. Material and methods A total of 159 active dentinal carious lesions in primary molars (from 50 children) were selected and randomly divided into two groups; NSSF and SDF. Varnish application was performed at the baseline visit and follow-up is carried out at 1, 3, 6 and 12 months. Parameters such as caries activity, depth, size, colour, and presence or absence of pain were noted at baseline and follow-up visits. Results The intergroup comparison of c…
Influence factors of dental anxiety in patients with impacted third molar extractions and its correlation with postoperative pain : a prospective stu…
2020
Background To explore the prevalence of dental anxiety (DA) in patients with third molar extractions and its influence factors and the correlation between DA levels and postoperative pain. Material and Methods A prospective and descriptive clinical study was performed. All patients who underwent the impacted third molar extraction from October 2017 to February 2019 were enrolled. DA levels were assessed by virtue of the modified dental anxiety scale (MDAS) and pain was assessed with a visual analog scale (VAS). Results A total of 150 patients were investigated and 136 valid questionnaires were retrieved, with an effective rate of 90.7%. The independent sample t-test and ANOVA results showed…
Efficacy of a topical gel containing chitosan, chlorhexidine, allantoin and dexpanthenol for pain and inflammation control after third molar surgery …
2020
BACKGROUND: The aim of this study was to evaluate and compare the postoperative effect of a topic gel containing chlorhexidine, chitosan, allantoine and dexpanthenol versus a placebo for pain and inflammation control after third molar surgery. MATERIAL AND METHODS: A gel combining 0.2% chlorhexdine, 0.5% chitosan, 5% dexpanthenol, 0.15% allantoin and 0.01% sodium saccharin was selected for this split mouth randomized controlled and double-blind trial including 36 patients with bilaterally and symmetrically impacted lower third molars. The teeth (n=72) were randomly divided into two groups before surgical removal: control group (CG; in which a placebo was given) and experimental group (EG). …
Effect of low-level GaAlAs laser irradiation on the proliferation rate of human periodontal ligament fibroblasts: an in vitro study
2003
Aim: The aim of this in vitro study was to evaluate a potential stimulatory effect of low-level laser irradiation on the proliferation of human periodontal ligament fibroblasts (PDLF). Materials and Methods: PDLF obtained from third molar periodontal ligaments were cultured under standard conditions and spread on 96-well tissue culture plates. Subconfluent monolayers were irradiated with an 809-nm diode laser operated at a power output of 10 mW in the continuos wave (cw) mode at energy fluences of 1.96‐7.84 Jcm ‐2 . The variable irradiation parameters were the time of exposure (75‐300 s per well) and the number of irradiations (1‐3). After laser treatment, the cultures were incubated for 24…