Search results for "MORPHOLOGY"
showing 10 items of 1425 documents
Synthesis and characterization of ZnO/ZnS/MoS2 core-shell nanowires
2017
The present research was supported by the Latvian National Research Program IMIS2 . Authors are grateful for Dr. Robert Kalendarev and Martins Zubkins for assistance in magnetron sputtering, Dr. Krisjanis Smits for TEM measurements, Dr. Roberts Zabels for AFM measurements and Reinis Ignatans for XRD measurements.
Crystal growth of ZnO micro and nanostructures by PVT on c-sapphire and amorphous quartz substrates
2010
Abstract ZnO micro and nanostructures in the form of tripods, grains, arrows and wires have been grown at temperatures as low as 500–300 ∘ C by a vapour transport method without catalysis and using a well selected value of the carrier gas flow. A transition state between grains and nanowires is reported being characterized by arrow-like structures which are constituted by a pyramidal head and a tail that is growing from the basal plane of the head. In order to understand the effect of growth conditions on the morphology of micro and nanostructures, an analysis of temperature and species concentration conditions has been carried out. In addition two different kinds of substrates have been u…
Synthesis of Titanate Nanotubes Directly Coated with USPIO in Hydrothermal Conditions: A New Detectable Nanocarrier
2011
International audience; Abstract: For the first time, titanate nanotubes (TiONts) coated with USPIO (ultrasmall superparamagnetic iron oxide) without polymer functionalization and directly obtained during TiONts formation is reported. The coating of these tubes was performed directly during the TiONts hydrothermal synthesis. After this treatment, in strongly basic conditions, USPIO particles kept their structure and magnetic properties while their size distribution slightly increased. By coupling zeta-potential measurements and TEM observations at different pH it appeared that interactions between nanotubes and USPIO were not electrostatic. This study presents the new design of a titanate n…
The Basic Idea and the Drivers
2011
Adhesive joining of Aluminum AA6082: the effect of resin and surface treatment
2009
Abstract In this work the effects of both the substrate surface condition and the adhesive properties on single-lap aluminium joint resistance were analysed. The aluminium sheets were mechanically treated with two abrasive surfaces evaluating the induced roughness; four different resins were used in adhesion tests. Moreover, wettability tests were performed in order to evaluate the effect of the above-mentioned parameters on the substrate/adhesive interaction. A design of experiments was defined in order to quantify the effect of the considered factors and their correlation.
Evolution of the morphology and characterzation of compatibilized PBT/EVA blends prepared by reactive extrusion
2006
In this work, the possibility of preparing compatibilized blends of poly(butylene terephthalate) (PBT) and an ethylene vinyl acetate (EVA) copolymer by reactive extrusion in the presence of an ethylene acrylic acid copolymer (EAA) and a bisoxazoline compound (PBO) as compatibilization promoters has been studied. In addition, the evolution of the morphology of the blends under different annealing conditions in the presence and absence of the compatibilizing promoters has been studied. Binary blends of PBT and EVA showed behavior typical of incompatible blends with a gross morphology and bad mechanical performance. The situation was however different for ternary PBT/EVA/EAA and especially for…
Accelerated weathering of PP based nanocomposites: Effect of the presence of maleic anhydryde grafted polypropylene
2013
Polymer nanocomposites are currently a topic of great interest. The increasing importance they are gaining also in the standpoint of industrial applications, is giving concerns regarding their environmental stability and, in general, their behaviour in outdoor applications, under direct solar irradiation. Papers available in the literature have highlighted the different influences of different nanosized fillers, in particular clay-based nanofillers; however, few data are available regarding other nanosized fillers. Furthermore, the research on polymer nanocomposites has clearly pointed out that the use of compatibilizers is required to improve the mechanical performance and the dispersion o…
Biodegradation paths of Mater-Bi®/kenaf biodegradable composites
2013
Composites obtained from biodegradable polymers and natural–organic fillers are attracting increasing interest, thanks to the environmental advantages they promise. On the other hand, the real biodegradation performance of a biodegradable polymer/natural organic filler composite should be assessed by performing specific biodegradation tests. These are often carried out under laboratory conditions, but more realistic conditions should be taken into account. In this work, a systematic study on the biodegradation of kenaf fiber-filled Mater-Bi® composites in different environments is presented, and some interesting parameters for the understanding of the optimum way to obtain a fast degradatio…
Polymeric scaffolds prepared via thermally induced phase separation: Tuning of structure and morphology
2008
Scaffolds suitable for tissue engineering applications like dermal reconstruction were prepared by Thermally Induced Phase Separation (TIPS) starting from a ternary solution PLLA/dioxane/water. The experimental protocol consisted of three consecutive steps, a first quench from the homogeneous solution to an appropriate demixing temperature (within the metastable region), a holding stage for a given residence time, and a final quench from the demixing temperature to a low temperature (within the unstable region). A large variety of morphologies, in terms of average pore size and interconnection, were obtained upon modifying the demixing time and temperature, owing to the interplay of nucleat…