Search results for "Machining"
showing 10 items of 180 documents
Optimisation of TA6V alloy surface laser texturing using an experimental design approach
2008
International audience; Active surfaces of plastic injection moulds are nowadays textured using classical techniques (chemical etching or EDM). Replacement of these technologies by a laser technology introduces a big flexibility: absence of mechanical contact with the tool, decrease of the effluent's volume and a big machining precision, even in the case of the complex forms as injection moulds for example. This paper reports the experimental study of the surface laser texturing of TA6V alloy. The influence of the operating factors on the laser texturing process has been studied using two experimental approaches: Taguchi methodology and response surface methodology (RSM). Empirical models h…
Comparative assessment of surface roughness produced by hard machining with mixed ceramic tools including 2D and 3D analysis
2005
Abstract This paper provides a new comprehensive analysis of part surface finish in continuous dry turning of a hardened construction steel when using mixed alumina cutting tools. Consequently, the surface profiles (2D arragement) and surface microstereometries (3D arragement) generated during different hard part turning operations on a 40H low chromium alloy steel (equivalent to AISI 5140 or DIN 41Cr4), heat treated to the hardness of about 60 HRC, were evaluated. As a result, this paper aggregates the multi-parameters characterization of the surface roughness with the machined surface structure obtained at the three selected feed rates and constant cutting speed of 100 m/min. Results show…
<title>Miniaturized objective lens for a photoelectron emission microscope</title>
2000
Photoemission electron microscopy (PEEM) has turned out to be one of the most promising methods for surface analysis in the recent years. It is a full field imaging technique based on the emission of secondary electrons by far ultraviolet light or X-rays. The emission intensity of secondary electrons is critically dependent upon the acceptance angle of the incident radiation. However, the size of the microscope restricts this angle substantially. Miniaturizing the objective lens of the microscope reduces the restriction of the acceptance angle and improves the performance of the PEEM considerably. We report on the fabrication of a miniaturized objective lens containing the extraction electr…
Tribology of Metal Cutting
2008
This chapter provides comprehensive knowledge regarding tribological behaviour of the cutting zone and characterizes specific features of the tool–chip contact that influence friction mechanisms in this area. Adhesion, plastic deformation of contacting asperities and ploughing action of the cutting edge are selected as three predominant mechanisms controlling sliding friction between the tool and the chip. The two-zone model of the tool–chip contact distinguishing seizure and sliding regions is characterized, along with experimental evidence based on photoelastic and material flow line techniques. Corresponding stress distributions for plane and restricted-contact cutting tools are provided…
Electrical measurements in µ-EDM
2008
The phenomena occurring between the electrodes in electric discharge machining when manufacturing features on the micro-metre scale (µ-EDM) is not fully understood. Poor quantitative knowledge of the sources of variability affecting this process hinders the identification of its natural tolerance limits. Moreover, improvements in measuring systems contribute to the acquisition of new information that often conflicts with existent theoretical models of this process. The prime objective of this paper is to advance the experimental knowledge of µ-EDM by providing a measurement framework for the electrical discharges. The effects of the electrodes metallic materials (Ag, Ni, Ti, W) on the elect…
Bonding behavior of Bi-metal-deposits produced by hybrid cold spray additive manufacturing
2022
Abstract Cold spraying (CS) is one of the most recently used additive manufacturing (AM) processes that allow forming large 3D objects efficiently without severe thermal effects. However, due to some limitations of the CSAM process, it is difficult to achieve the desired geometry with high precision. As a potential solution to this issue, CSAM process coupled machining, that is, hybrid addition and subtraction manufacturing, is proposed to achieve desired accuracy and reliable shape. Therefore, it is necessary to assess the mechanical reliability of multilayer deposits deposited by CSAM + machining processes before that. In this work, different bi-deposits were obtained via hybrid CSAM. The…
Analysis of surface characteristics of protaper universal and protaper next instruments by scanning electron microscopy
2017
Background Many new rotary files systems have been introduced, however, limited research has been conducted related to the surface irregularities of these files and if these have any effects on the files themselves. Hence, the aim of the present study was to analyze surface irregularities of the ProTaper® Universal rotary files (PTU) and the ProTaper Next™ rotary files (PTN) before and after instrumentation in curved canals. The main objective was to investigate the nature of these irregularities and how they might influence the use and fracture of rotary files during root-canal treatments. Material and methods The files were examined pre-operatively using a stereomicroscope and scanning el…
Composite layer-based analytical models for tool–chip interface temperatures in machining medium carbon steels with multi-layer coated cutting tools
2006
Abstract This investigation is devoted to the thermal problems in dry orthogonal turning of a C45 medium carbon steel with natural contact tools treated with multi-layer coatings with an intermediate Al 2 O 3 layer. New hybrid analytical models for estimating heat partition to the chip and the tool–chip interface temperatures were proposed. Furthermore, the physics-based modelling concept, which applies composite layer approach was developed to estimate the average and maximum steady-state tool–chip interface temperatures in orthogonal turning. The model predictions were compared to appropriate experimental process data using natural tool-work thermocouples and other simulated and measured …
The effect of wear on the tetragonal-to-monoclinic transformation and the residual stress distribution in zirconia-toughened alumina cutting tools
1998
Abstract Zirconia-toughened alumina cutting tools have been examined after machining an AISI 1040 steel. The Raman spectrum of zirconia and the fluorescence spectrum from alumina have been used to determine the extent of the tetragonal-to-monoclinic (t-m) transformation and the residual stresses in and around the worn-out crater, respectively. Although about 15% vol. m-zirconia is present even in a brand new cutting tool, it was shown that the crater region undergoes the t-m transformation up to 40% vol. In both cases, the transformed zone is concentrated near the surface. The residual stresses in alumina are slightly compressive in the new cutting tool and away from the crater region, but …
Orthogonal and Oblique Cutting Mechanics
2008
This chapter provides the engineering knowledge and modelling techniques applied in description of the material behaviour in the cutting zone resulting in chip formation and its separation from the bulk material. Geometrical and kinematical characteristics of orthogonal and oblique cutting models are classified and specified. Forces acting on the cutting tools and their measurement methods for several machining operations, such as turning, milling, drilling, boring and grooving, are presented. Moreover, forces acting in the cutting zone and their resolution on the shear plane and the rake and flank faces, along with stress distributions, are presented. The chapter highlights how components …