Search results for "Materiali"
showing 10 items of 876 documents
The influence of Al doping on the photocatalytic activity of nanostructured ZnO: The role of adsorbed water
2018
Abstract Al doped ZnO nanoparticles (labeled as x% A-ZnO, x = 0.0, 0.5, 1.0, and 1.5) were synthesized by a simple sol-gel method, characterized and tested as photocatalysts for the degradation of a model compound under UV-light irradiation. Diffuse reflectance spectroscopy (DRS) and photoelectrochemical analysis have been performed to evidence their optical and electronic behavior. The structural features of the powders were highlighted by means of specific surface area (SSA) analysis, X-ray diffraction (XRD), Fourier-transform infrared (FTIR) and Raman spectroscopy. Al doping results in enhanced photocatalytic activity of the modified powders with respect to pure ZnO. In particular, the h…
Absolute crystallinity and photocatalytic activity of brookite TiO2 samples
2017
Abstract This study reports a method to determine the absolute crystallinity of partly crystalline brookite TiO2 photocatalysts. A natural, a commercial and various home-prepared brookite powders were characterized by X-ray diffraction analysis, Raman spectroscopy, scanning electron microscopy, UV–vis diffuse reflectance spectroscopy and nitrogen adsorption measurements. The absolute crystallinity was calculated from the ratio between the full width at half maximum intensity of the (121) X-ray diffraction peaks of the brookite samples and the (111) peak of CaF2 as internal standard. The photocatalytic activity of the powders was tested employing the photodegradation of 4-nitrophenol as well…
Imbibition of Femtoliter-Scale DNA-Rich Aqueous Droplets into Porous Nylon Substrates by Molecular Printing
2019
This work presents the first reported imbibition mechanism of femtoliter (fL)-scale droplets produced by microchannel cantilever spotting (μCS) of DNA molecular inks into porous substrates (hydrophilic nylon). Differently from macroscopic or picoliter droplets, the downscaling to the fL-size leads to an imbibition process controlled by the subtle interplay of evaporation, spreading, viscosity, and capillarity, with gravitational forces being quasi-negligible. In particular, the minimization of droplet evaporation, surface tension, and viscosity allows for a reproducible droplet imbibition process. The dwell time on the nylon surface permits further tuning of the droplet lateral size, in acc…
Structural and CO [sub] 2 capture properties of ethylenediamine-modified HKUST-1 metal-organic framework
2020
The high structural and compositional flexibility of metal–organic frameworks (MOFs) shows their great potential for CO2 capture and utilization in accordance with the environmental guidelines of low-carbon technology developments. HKUST-1 as one of the most intensively studied representatives of MOFs for such purposes excels because of its simplicity of production and high ability to tune its intrinsic properties by various functionalization processes. In the present work, ethylenediamine functionalization was performed for the first time in order to thoroughly investigate the amine sorption sites’ impact on the CO2 capture performance of HKUST-1. The placement of ethylenediamine moieties …
Rapid One-Step Fabrication of Graphene Oxide-Decorated Polycaprolactone Three-Dimensional Templates for Water Treatment
2020
Coating of flexible substrates is crucial to prepare versatile, multifunctional materials. However, exploration of effective fabrication approaches is still a challenging issue, because the pathways generally proposed require time-consuming, multistep protocols. Here, we developed a one-pot process for decorating either pearl necklace-like or fibrous fluffy-like structures of polycaprolactone (PCL) with graphene oxide (GO) skin. PCL solutions were dry jet-wet electrosprayed or electrospun into a stirred liquid collector constituted by ethanol-containing GO nanoparticles. The stirred liquid collector enables the formation of 3D-structures, whose microarchitecture can be designed by controlli…
Synthesis of a fluorinated graphene oxide-silica nanohybrid: Improving oxygen affinity
2016
An easy method to achieve a fluorinated graphene oxide–silica nanohybrid (GOSF) is presented. Graphene oxide (GO) was synthesized by Hummer's modified method, the GO–silica nanohybrid (GOS) was obtained via Fischer esterification, the fluorinated moiety (3-pentadecafluoroheptyl-5-perfluorophenyl-1,2,4-oxadiazole) was introduced by nucleophilic substitution operated by the hydroxyl functionalities onto the GOS surface. Full characterization of the new materials confirmed the formation of covalent bonds between the graphene oxide/silica hybrid matrix and the fluorinated moieties. The proposed methodology offers an easy way to get fluorinated carbon/silica hybrid nanomaterials avoiding the har…
The effect of a liquid CTBN rubber modifier on the thermo-kinetic parameters of an epoxy resin during a pultrusion process
2003
Abstract Rheo-kinetic behaviour of an epoxy resin, coupled with an anhydride hardener, with different CTBN liquid rubber concentration (0–15 phr), used in fibre reinforced plastics, was analysed comparing experimental data with theoretical models. The modelling of technological pultrusion process for thermoset matrix composites, developed through a numerical code realised with MATLAB, is reported, too. The model includes conduction and cure heat, degree of cure and viscosity evolution during the curing within the die. Considerable differences in process condition, using different rubber amount, are obtained. The numerical modelling of process conditions shows that the CTBN rubber presence i…
Epoxy composites filled with high surface area-carbon fillers
2013
Citation: J. Appl. Phys. 114, 164304 (2013); doi: 10.1063/1.4826529 (Received 24 July 2013; accepted 6 October 2013; published online 22 October 2013) A comprehensive analysis of electrical, electromagnetic (EM), mechanical, and thermal properties of epoxy resin composites filled with 0.25–2.0 wt. % of carbon additives characterized by high surface area, both nano-sized, like carbon nanotubes (CNTs) and carbon black (CBH), and micro-sized exfoliated graphite (EG), was performed. We found that the physical properties of both CNTs- and CBH-based epoxy resin composites increased all together with filler content and even more clearly for CBH than for CNTs. In the case of EG-based composites, go…
A simplified predictive approach to assess the mechanical behavior of pinned hybrid composites aged in salt-fog environment
2020
Abstract Aim of this paper is to assess the predictive capabilities of a simplified theoretical approach on the failure load of aged pinned hybrid composites. In particular, the mechanical performances of glass-flax hybrid epoxy laminates exposed to salt spray fog environment, were used as input data in order to address the analytical model. Preliminarily, the relationship among mechanical performances, failure mechanisms, joint geometry and ageing time, was evaluated by double-lap joint tests on pinned samples at varying joint geometry and ageing time. The bearing and shear out limit stress of samples aged for 60 days under the salt-fog environment underwent a reduction of about 20% compar…
Effect of curing time on the performances of hybrid/mixed joints
2013
Abstract The aim of this work is the study of a mixed method used for the joining of aluminum alloys with glass reinforced polymer’s substrates (in the next GFRP). In particular, the technique of self-piercing riveting (in the next SPR) was applied on a co-cured joint in order to evaluate the influence of the time of inserting the rivet on the mechanical behavior of the mixed joints. Three different joints were realized: adhesive by co-curing technique, mechanical by self piercing riveting (in the next SPR) and a mixed one in which the joining techniques (i.e. adhesive and mechanical) were combined. In particular, to determine the optimum time to insert the rivet, three different times from…