Search results for "Matrix"

Efficiency of Wave Energy Converters off the Sicilian Channel

2019

This paper presents a preliminary analysis on efficiency of wave energy converters off the Sicilian Channel (Italy) carried out using the SNL-SWAN spectral model (”Sandia National Laboratories – Simulating WAves Nearshore”). This open source numerical code makes possible to calculate the power extracted from wave energy converter (WEC) devices, arranged in arrays. The WEC arrays were located parallel to the coastline, near the 20 m bathymetric isoline. Three devices were tested: Pelamis, Wave Dragon and Oyster 2; one of the input data of the numerical model is the WEC power matrix, expressed as a function of the wave height and period. This matrix was determined experimentally by the protot…

Cyclic axial testing of columns confined with Fiber Reinforced Cementitious Matrix

2012

Effectiveness of Flax-TRM composites under traction

2023

The scientific research in the field of masonry structures is increasingly welcoming the adoption of innovative and sustainable rehabilitation techniques aimed at the safeguarding of the Built Cultural Heritage. Textile Reinforced Matrix (TRM) composites are the most widely investigated strengthening systems for ancient masonry structures, thanks to their high compatibility level with the material substrates in terms of fire resistance, chemical/physical aspects, reversibility property, little impact on dimensions, stiffness and weight. Nevertheless, in the last years, the growing concern on sustainability increased the interest in products with low environmental impact, for promoting circu…

Improving Harris corner selection strategy

2011

This study describes a corner selection strategy based on the Harris approach. Corners are usually defined as interest points for which intensity variation in the principal directions is locally maximised, as response from a filter given by the linear combination of the determinant and the trace of the autocorrelation matrix. The Harris corner detector, in its original definition, is only rotationally invariant, but scale-invariant and affine-covariant extensions have been developed. As one of the main drawbacks, corner detector performances are influenced by two user-given parameters: the linear combination coefficient and the response filter threshold. The main idea of the authors' approa…

Speeding up the Consensus Clustering methodology for microarray data analysis

2010

Abstract Background The inference of the number of clusters in a dataset, a fundamental problem in Statistics, Data Analysis and Classification, is usually addressed via internal validation measures. The stated problem is quite difficult, in particular for microarrays, since the inferred prediction must be sensible enough to capture the inherent biological structure in a dataset, e.g., functionally related genes. Despite the rich literature present in that area, the identification of an internal validation measure that is both fast and precise has proved to be elusive. In order to partially fill this gap, we propose a speed-up of Consensus (Consensus Clustering), a methodology whose purpose…

Environmentally Friendly Composites and Surface Treatments for Metal-to-Composite Hybrid Joints for Marine Application

2022

In this study, the use of natural fibres (flax and basalt) in combination with a recyclable epoxy matrix based on cleavable amines is suggested for improving the sustainability of marine industry. In addition, a new and eco-friendly anodizing process based on tartaric sulfuric acid solution (TSA) and a pore widening step in a NaOH aqueous solution was carried out on aluminium alloy (AA5083) to evaluate its effect on the adhesion strength and damage tolerance after low velocity impact of co-cured adhesive joints with a basalt fibre reinforced and recyclable laminate. The durability in marine environment was simulated by exposing samples to salt-fog spray conditions over a period of 90 days. …

Opuntia Ficus Indica based green composites for NPK fertilizer controlled release produced by compression molding and fused deposition modeling

2022

Excessive fertilization causes ecological problems due to leaching issues. To solve this problem and promote agriculture sustainability an innovative green composite for controlled release fertilizers was produced by adding NPK fertilizer flour to a biodegradable polymer with or without Opuntia Ficus Indica (OFI) particles. Six for- mulations were produced and employed for the fabrication of devices both for compression molding and fused deposition modeling (FDM). Both fillers displayed a good dispersion in the composites, excellent adhesion with the polymeric matrix and effectively acted as reinforcement. The decrease of NPK release rate (up to 30 days) was achieved using whole composites …

Assessment of performance degradation of hybrid flax-glass fiber reinforced epoxy composites during a salt spray fog/dry aging cycle

2022

The main goal of this paper is the evaluation of the performances reversibility of hybrid composites when they are dried after being aged in salt-fog environment. To this aim, epoxy composites reinforced with flax and glass fabrics respectively in the internal and external laminae were at first exposed to salt-fog (i.e., identified as wet phase) and then stored in controlled conditions (i.e., identified as dry phase). The flexural properties evolution of these composites as well as their water uptake and contact angle were monitored at varying time of both phases. The flexural strength and modulus of hybrid composites is 23.4% (17.9%) and 15.5% (12.9%) lower than unaged ones after 30 (15) d…

Modelling the structure-property relationships of high performance PBAT-based biocomposites with natural fibers obtained from Chamaerops humilis dwar…

2022

Two fibrous fillers were achieved from stalks and leaves of Chamaerops humilis dwarf palm and tested as reinforcing agents for poly(butylene adipate co-terephthalate) (PBAT)-based composites. The influence of filler type and content on the morphomechanical properties of the green composites was assessed. The outcomes of tensile tests pointed out that both fillers are strong candidates to overcome the two main limiting aspects of PBAT, that is, the lack of both stiffness and cost-effectiveness, while preserving its stretchability and environmental sustainability. The remarkable stiffness increments (up to 300%), combined with fair retention of stretchability (33%) and doubled resistance, led…

Green composites for fertilizer controlled release produced by compression molding and FDM

2023

Excessive fertilization causes ecological problems due to leaching issues. To solve this problem and promote agriculture sustainability an innovative green composite for controlled release fertilizers was produced by adding NPK fertilizer flour to a biodegradable polymer with or without Opuntia Ficus Indica (OFI) particles. Six formulations were produced and employed for the fabrication of devices both for compression molding (CM) and fused deposition modeling (FDM). Both fillers displayed a good dispersion in the composites, excellent adhesion with the polymeric matrix and effectively acted as reinforcement. The decrease of NPK release rate (up to 30 days) was achieved using whole composit…