Search results for "Measure"
showing 10 items of 4687 documents
Microfabricated high temperature sensing platform dedicated to scanning thermal microscopy (SThM)
2018
Abstract The monitoring of heat flux is becoming more and more critical for many materials and structures approaching nanometric dimensions. Scanning Thermal Microscopy (SThM) is one of the tools available for thermal measurement at the nanoscale and requires calibration. Here we report on a micro-hotplate device made of a platinum heater suspended on thin silicon nitride (SiN) membranes integrating specific features for SThM calibration. These heated reference samples can include a localized resistive temperature sensors (RTD) or standalone platinum membranes (typically 10 × 10 μm2) on which the temperature can be measured precisely. This functional area is dedicated to (1) estimate the th…
Metrological Properties of the Test Setup for Determination Shielding Effectiveness of the Industrial Cable Connectors
2017
Abstract The paper presents results related to assessment of the repeatability and reproducibility of the measurement test setup for determination the relative value of the shielding effectiveness coefficient of the industrial connectors. The construction of the proposed test setup, the measurement method and the procedure for the analysis of measurement results were described. To determine the value of the repeatability and reproducibility coefficient, the two–way analysis of variance was used, which additionally allows for an assessment of the influence of individual sources of variance. The measurements and their analysis were conducted for several frequencies in the range up to 1 GHz. A…
A new technique for partial discharges measurement under DC periodic stress
2017
The aim of the present work is to recognize the type of defect in insulating materials employed in DC electrical systems. This analysis, under AC stress, is carried out by using the Phase Resolved method (PRPD). While, under constant voltage stress this method cannot be performed and measurements show complexities. In order to overcome these problems, a new technique is proposed, based on the application of a periodic continuous waveform. Simulation results, carried out by using a model based on a time-variable conductance of an air void defect, showed the PRPD pattern that can be obtain. Furthermore, compared to the constant DC stress, the measurement duration became lower and the discharg…
Optimal Dynamic Portfolio Risk Management
2016
Numerous econometric studies report that financial asset volatilities and correlations are time-varying and predictable. Over the past decade, this knowledge has stimulated increasing interest in various dynamic portfolio risk control techniques. The two basic types of risk control techniques are: risk control across assets and risk control over time. At present, the two types of risk control techniques are not implemented simultaneously. There has been surprisingly little theoretical study of optimal dynamic portfolio risk management. In this paper, the author fills this gap in the literature by formulating and solving the multi-period portfolio choice problem. In terms of dynamic portfoli…
Flow resistance equation for rills
2017
In this paper, a new flow resistance equation for rill flow was deduced applying dimensional analysis and self‐similarity theory. At first, the incomplete self‐similarity hypothesis was used for establishing the flow velocity distribution whose integration gives the theoretical expression of the Darcy–Weisbach friction factor. Then the deduced theoretical resistance equation was tested by some measurements of flow velocity, water depth, cross section area, wetted perimeter, and bed slope carried out in 106 reaches of some rills shaped on an experimental plot. A relationship between the velocity profile, the channel slope, and the flow Froude number was also established. The analysis showed …
Measuring rill erosion using structure from motion: A plot experiment
2017
Abstract In this paper the results of a plot experiment on rill erosion are reported. The rill network, manually incised on the soil and further shaped by a clear inflow discharge, was surveyed using the three-dimensional photo-reconstruction (3D-PR) technique which allows to obtain a digital terrain model (DTM) by a large series of oblique images of the channel from consumer un-calibrated and non-metric cameras. The three-dimensional (3D) DTM and the quasi-tridimensional (2.5D) model were generated by Agisoft Photoscan software. For a single rill channel, the reliability of the 3D image-based ground measurements of morphological and hydraulic variables was positively tested by the correspo…
SMOS Level-2 Soil Moisture Product Evaluation in Rain-Fed Croplands of the Pampean Region of Argentina
2016
A field campaign was carried out to evaluate the Soil Moisture (SM) MIR-SMUDP2 product (v5.51) generated from the data of the Microwave Imaging Radiometer using Aperture Synthesis (MIRAS) aboard the Soil Moisture and Ocean Salinity (SMOS) mission. The study area was the Pampean Region of Argentina, which was selected because it is a vast area of flatlands containing quite homogeneous rain-fed croplands, which are considered SMOS nominal land uses and hardly affected by radio-frequency interference contamination. Transects of ground handheld SM measurements were performed using ThetaProbe ML2x probes within four Icosahedral Snyder Equal Area Earth (ISEA) grid nodes, where permanent SM statio…
Statistical retrieval of atmospheric profiles with deep convolutional neural networks
2019
Abstract Infrared atmospheric sounders, such as IASI, provide an unprecedented source of information for atmosphere monitoring and weather forecasting. Sensors provide rich spectral information that allows retrieval of temperature and moisture profiles. From a statistical point of view, the challenge is immense: on the one hand, “underdetermination” is common place as regression needs to work on high dimensional input and output spaces; on the other hand, redundancy is present in all dimensions (spatial, spectral and temporal). On top of this, several noise sources are encountered in the data. In this paper, we present for the first time the use of convolutional neural networks for the retr…
A Lightweight Prototype of a Magnetometric System for Unmanned Aerial Vehicles
2021
Detection of the Earth’s magnetic field anomalies is the basis of many types of studies in the field of earth sciences and archaeology. These surveys require different ways to carry out the measures but they have in common that they can be very tiring or expensive. There are now several lightweight commercially available magnetic sensors that allow light-UAVs to be equipped to perform airborne measurements for a wide range of scenarios. In this work, the realization and functioning of an airborne magnetometer prototype were presented and discussed. Tests and measures for the validation of the experimental setup for some applications were reported. The flight sessions, appropriately programm…
Dissipative analogies of step-pool features: From rills to mountain streams
2019
Abstract In this paper the dissipative similarity of step-pool units at different spatial scales ranging from rills to streams is analyzed. This investigation benefits from the latest theoretical advances in open channel flow resistance, high-resolution topography from close-range photogrammetry applied to rill erosion and the availability of published data from literature on step-pool streams. At first, the integration of a power velocity distribution allowed to obtain a theoretically-based expression of Darcy-Weisbach friction factor, in which Γ function and δ exponent of the velocity profile are included. Then this theoretically-deduced flow resistance relationship is calibrated and test…