Search results for "Measurement"
showing 10 items of 2918 documents
Fibre-Optic Links For A Measurement And Control System At A HV Laboratory
1990
The paper presents a fibre-optic linking system for a measurement and control system installed at an industrial HV laboratory. The indirect voltage and current measurement system is furnished with the E0/0E transducers and FO links. The exploitation requirements on the adequate measurement accuracy and reliability have necessitated the inclusion of additional, digital PO link feedback from the computer control system. The proposed measurement system with the FO link has been installed at an HV laboratory transformer of an electric power station and successfully tested together with the overall equipment.
Energy measurements at Skarpnes zero energy homes in Southern Norway: Do the loads match up with the on-site energy production?
2017
Five houses are designed as zero-energy homes in Skarpnes, Norway. The energy goal is to achieve net zero-energy balance on an annual basis. The houses have heat pumps and solar cells (PV). Energy use and delivered energy have been monitored from June 2015. Variations between calculations and measurements are explained by technical and non-technical reasons. For the first year, higher than expected energy loads result in a solar energy cover factor of 65–87% of delivered electricity. The PV generation performs satisfactorily, hence, it may be possible to achieve energy goals during later years provided technical adjustments or behavioral changes. Acknowledgements. This report has been writt…
Modular, customisable, accomodation-friendly antenna system for satellite avionics: Development, prototyping and validation
2014
In the frame of ESA program AO/1- 6737/11/NL/MH, an innovative X-band antenna system for satellite avionics has been studied, demonstrated and validated at Proof of Concept Model level. The innovative contribution of such an antenna system relies on modularity, customizability and accommodation friendliness. The antenna concept is based on a Plug and Play architecture, where the basic module is a 2.7 cm-cube with a mass of 53 gr, which can be clustered in array configuration. A catalogue of predefined and ready-to-use clusters could be developed with the possibility of adapting the antenna systems to various platform types by tuning just a few control parameters. Different levels of customi…
A simplified approach for load flow analysis in MV smart grids based on LV power measurements
2017
This paper presents a simplified approach for load flow analysis in medium voltage (MV) distribution networks. It is a power summation Backward/Forward (B/F) algorithm, based on measurements of active and reactive powers at low voltage (LV) side of MV/LV distribution substations. The proposed solution allows achieving good accuracy, computational efficiency and fast convergence. In order to verify the algorithm performances, simulation studies are carried out in the case of a real test system, i.e. the distribution grid of Favignana Island (Mediterranean Sea, Italy). The compatibility between simulations results and power measurements at the MV bus bars of the generating substation shows th…
A new bi-faced log periodic printed antenna
2005
In this paper, a new design of a broadband planar printed antenna based on the academic log periodic antenna is presented. The antenna consists of a series of printed dipoles, distributed on both faces of the substrate. Some configurations are explored, with a different number of printed dipoles. These are designed, simulated, fabricated, and measured. The calculated and measured return losses and radiation patterns are presented. The utility of the proposed antenna associated with its frequency bandwidth is better than 80%. The measured absolute gain is 6.5 dBi, and the front-to-back ratio is around 8 dB. The presented antenna should find wide applications in wireless communication systems…
Dual-band printed dipole antenna for Wi-Fi 802.11n applications
2010
A dual-band compact printed dipole antenna for Wi-Fi 802.11n applications in the 2.45 and 5.5 GHz bands is presented. The proposed antenna consists of two printed dipoles with the arms located onto both sides of the dielectric substrate and a bended stripline. This feed scheme makes easy the integration of the antenna with the electronic subsystem and avoids the radiation towards the device. For the design and optimisation, a specifically developed finite-difference time-domain based code is used. The antenna has then been fabricated, simulated and measured. The return losses highly match the Wi-Fi frequency specifications with a moderate gain (between 1 and 3 dBi) and efficiency better tha…
A Laboratory Scale Equipment to Relieve Force and Pressure in Cold Extrusion of Lead Hollow Components
2008
Nowadays, many researchers are involved in studies aimed to the explanation of some peculiar aspects regarding manufacturing processes. In this paper, an experimental campaign was carried out in order to reproduce tube extrusion starting from a cylindrical billet. In particular, the development of a proper equipment is presented: the aim was to measure both the total load, by using the testing machine load cell, and the local pressure value on the porthole. The latter task was carried out performing a proper system based on the use of a small load-cell. The tube was extruded with a good surface quality and the external area does not show any welding line evidence. Pure Lead was used for the…
Uncertainty Management in the measurements performed by means of virtual instruments
2008
The uncertainty management is the discipline of optimising the cost of a measurement versus the uncertainty target. In particular, the paper deals with the measurements performed by using a generic virtual instrument. The task is achieved by using the PUMA (procedure for uncertainty management) method that is an iterative technique originally conceived for geometrical and mechanical measurements. The approach is completely based on the "guide to the expression of uncertainty in measurement" rules, but provides a more engineering methodology, since it allows to optimize the cost of the measurements versus the uncertainty target, avoiding the use of inadequate or, on the contrary, too expensi…
RF-based node system for blind navigation in running activities
2008
The system presented is oriented for use by blind adults or children in running activities at a stadium or an analogical large space. The system dynamically provides a blind person with navigation related information. Radio signal strength measurements are used in localization task. The system makes a blind person more independent in sport, eliminating the need in explicit human assistance.
Towards a cyber-physical era: soft computing framework based multi-sensor array for water quality monitoring
2018
Abstract. New concepts and techniques are replacing traditional methods of water quality parameter measurement systems. This paper introduces a cyber-physical system (CPS) approach for water quality assessment in a distribution network. Cyber-physical systems with embedded sensors, processors and actuators can be designed to sense and interact with the water environment. The proposed CPS is comprised of sensing framework integrated with five different water quality parameter sensor nodes and soft computing framework for computational modelling. Soft computing framework utilizes the applications of Python for user interface and fuzzy sciences for decision making. Introduction of multiple sen…