Search results for "Mechanical engineering"
showing 10 items of 4245 documents
Laboratory evaluation of falling-head infiltration for saturated soil hydraulic conductivity determination
2020
Falling-head one-dimensional infiltration procedures, such as the simplified falling-head (SFH) technique, yield estimates of saturated soil hydraulic conductivity, Ks, with parsimonious and rapid experiments. Factors that can influence determination of Ks by the SFH technique were tested in the laboratory on three repacked soils differing by particle diameter ranges (0-2000, 0- 105 and 105-2000 mm, respectively). Using the theoretically calculated depth of ponding on the infiltration surface, D, instead of the measured one had a small impact on the Ks calculations (means differing by a factor of 1.1-1.2, depending on the soil). For the finest soil, Ks decreased by 3.1 times as D increased …
Predicting plot soil loss by empirical and process-oriented approaches. A review
2018
Soil erosion directly affects the quality of the soil, its agricultural productivity and its biological diversity. Many mathematical models have been developed to estimate plot soil erosion at different temporal scales. At present, empirical soil loss equations and process-oriented models are considered as constituting a complementary suite of models to be chosen to meet the specific user need. In this paper, the Universal Soil Loss Equation and its revised versions are first reviewed. Selected methodologies developed to estimate the factors of the model with the aim to improve the soil loss estimate are described. Then the Water Erosion Prediction Project which represents a process-oriente…
Suppression of Phyllospheric Microbiota Alters Content of Pharmacologically Relevant Compounds of <i>S. nigra</i> Flowers
2018
Accumulating scientific evidence suggests that medicinal plant-associated microbiota has a significant role in biosynthesis of pharmacologically relevant compounds. Suppression of S. nigra microbiota by an antibiotic treatment leads to a decreased emission of volatile terpenoids from S. nigra flowers and an altered metabolome of a host plant. However, it is not known if suppression of microbiota also affects an abundance of health promoting compounds and pharmacologically relevant properties of S. nigra. The present study reveals, that suppression of phyllospheric microbiota by an antibiotic treatment affects total phenolic content (TPC), anti-radical activity (ARA) and total flavonol conte…
Extraction and Analysis of Carotenoids from Escherichia coli in Color Complementation Assays
2017
A common method to investigate the function of genes putatively involved in carotenoid biosynthesis is the so called color complementation assay in Escherichia coli (see, e.g., Cunningham and Gantt, 2007). In this assay, the gene under investigation is expressed in E. coli strains genetically engineered to synthesize potential carotenoid substrates, followed by analysis of the pigment changes in the carotenogenic bacteria via high-performance liquid chromatography (HPLC). Two crucial steps in this method are (i) the quantitative extraction of the carotenoids out of E. coli and (ii) the reproducible and complete separation of the pigments by HPLC. Here, we present a protocol for the extracti…
Does silica concentration and phytolith ultrastructure relate to phytolith hardness?
2017
Abstract Grasses are an important part of the forage of many herbivorous mammals and their phytoliths have long been regarded as the most important agent of tooth wear. Recent work has challenged this “paradigm” in finding evidence 1. of native phytoliths to be much softer then tooth enamel and 2. indicating, that phytolith hardness is highly variable, 3. prone to methodology and 4. not easy to be related to habitat conditions. We conduct controlled silica-cultivations measuring SiO2 content in the common forage grass Themeda triandra. Phytoliths are extracted natively, and nano-indentation values are measured. Phytolith hardness in Themeda triandra is found to be independent of silicate av…
Anti-Bacterial Activity and Online HPLC-DPPH Based Antiradical Kinetics of Medicinal Plant Extracts of High Relevance for Cosmetics Production
2018
The present study provides an assessment of extracts of six medicinal plants for their applicability in cosmetic formulations aimed at anti-UV protection and anti-acne treatment. Ethanol extracts of Chelidonium majus L., Myrtus communis L., Hamamelis virginiana L., Juniperus communis L., Alchemilla vulgaris and Ilex paraguariensis are analysed for the phytochemical content, antimicrobial activity, antiradical activity and antiradical kinetics. The phytochemical composition of the plants is investigated by LC-MS analysis and the most active antioxidants in plant extracts are determined by online HPLC-DPPH assay. The kinetic parameters of the antiradical reaction are determined both for the s…
Stability Studies of Bioactive Compounds from Birch Outer Bark Ethanolic Extracts
2018
The literature survey summarizes information about birch outer bark phytochemical composition and details major components: betulin, betulinic acid, lupeol and ursolic acid. In the practical part of research birch outer bark major component stability against chemical and physical degradation was tested; total phenolic content and the antiradical activity of the degraded and nondegraded ethanolic extracts was studied using UV/VIS spectroscopy; the phytochemical composition of the birch outer bark ethanolic extract was investigated by HPLC-TOF/MS. The study of stability experiments has been carried out, which found that birch outer bark ethanolic extract compounds can be exposed to thermal an…
Interaction of Oily Water with Floating Porous Ceramic and Immobilized Microorganisms
2018
Oily water was treated with porous ceramic granules and immobilized microorganisms. Floating granules with bulk density of 0.63-0.66 g cm-3were used. The sorption of motor oil was investigated for dry and wetted granules. Respiration experiments showed that microorganisms immobilized on floating ceramic carrier and treated with oily water were influenced by agitation of liquid. The treatment of oily water with low salinity (1-9 g L-1) showed that oil removal efficiency decreased after increasing water salinity. Likewise, oil removal efficiency decreased from 12 to 9% per gram of ceramic carrier after increasing the spill of oil from 9 to 35 g per square meter. Porous granules with immobiliz…
Corrosion in alkanolamine used for acid gas removal: From natural gas processing to CO2 capture
2010
The aim of this paper is to review some of the parameters influencing the corrosivity of alkanolamine solvents used for natural gas purification or for CO2 capture. In the light of literature data and of new experimental results, the influences of temperature and of acid gas loading are discussed. These two parameters appear to have a strong impact on corrosion rates of carbon steel, with extrapolated corrosion rates of several tens of mm/year for the highest temperature and acid gas loading condition.
Rocking of rigid block on nonlinear flexible foundation
2017
Abstract The two prime models used currently to describe rocking of rigid bodies, the Housner’s model and the Winkler foundation model, can capture some of the salient features of the physics of this important problem. These two models involve either null or linear interaction between the block and the foundation. Hopefully, some additional aspects of the problem can be captured by an enhanced nonlinear model for the base-foundation interaction. In this regard, what it is adopted in this paper is the Hunt and Crossley’s nonlinear impact force model in which the impact/contact force is represented by springs in parallel with nonlinear dampers. In this regard, a proper mathematical formulatio…