Search results for "Metallurgy"

Formation of calcium containing minerals in the low temperature dolomite ceramics

2011

In order to elaborate low temperature dolomite ceramics, potentially suitable for the production of building materials, local low carbonate clay and dolomite siftings were used as a raw materials. Relationship between mechanical properties, mineral composition and firing temperature kept in the range of 600-800° C were established. According to the obtained data it was detected that the optimal burning temperature, giving the highest crushing strength (40 MPa) was around 700-750° C, optimal proportion of dolomite and clay expressed as ratio between CaO and Al2O3 - 2.5 wt%. Gradual formation of C3A occurs during firing, yielding C4AHX, i.e. mainly C4AH13 after hydratation of obtained composi…

Application of metal coatings for functionalization of technical fibers and fabrics

2011

The metal coatings in combination with sonochemical and leaching processes are used for nanostructuring and functionalization of glass, flax and hemp fabrics. The leaching is used for nanostructuring sodium alumosilicate K-glass fabrics to obtained silica like fibre with nanoporous structure on surface and in volume. The natural fibres as well as fabrics themselves are porous media. The porous media adsorbs water and content of moisture in fabrics have to be controlled. The metal-coated fabric characterization is an actual problem. Application of metal coatings for the functionalization of technical fibres and fabrics faced with influence of moisture on functional properties, e.g., the impe…

A Metallacryptand-Based Manganese(II)–Cobalt(II) Ferrimagnet with a Three-Dimensional Honeycomb Open-Framework Architecture

2008

Tailoring the microstructure and mechanical properties of Ti–Al alloy using a novel electromagnetic stirring method

2006

The effect of melt convection during the solidification of Ti45Al55 alloys was investigated in terms of microstructure evolution and the resulting mechanical properties. The samples were subjected to conventional induction melting as well as enhanced melt stirring by an external magnetic field using a specially designed floating zone arrangement. The stirred samples showed a significant improvement of plastic deformability. A strong change in the morphology from dendritic to spherical and an increased properitectic phase fraction were observed after stirring.

Multiphysical modeling of dissimilar welding via interlayer

2011

Abstract A multiphysical finite element modeling of dissimilar welding via interlayer material was proposed. A 2D model including heat transfer, fluid flow and level set problems allowed to simulate the morphology and the composition of melted zone in horizontal plane. The calculated thickness of melted interlayer was used as a main criterion for the choice of optimal welding conditions, when the chemical interaction between the joined materials must be avoided. A 1D diffusion model at the limit of melted zone allowed estimating the length and the composition of diffusion layer between one of the materials and the interlayer basing on previously calculated local temperature gradient. The si…

'Cold' crystallization in nanostructurized 80GeSe2-20Ga2Se3 glass

2015

International audience; 'Cold' crystallization in 80GeSe 2-20Ga 2 Se 3 chalcogenide glass nanostructurized due to thermal annealing at 380°C for 10, 25, 50, 80, and 100 h are probed with X-ray diffraction, atomic force, and scanning electron microscopy, as well as positron annihilation spectroscopy performed in positron annihilation lifetime and Doppler broadening of annihilation line modes. It is shown that changes in defect-related component in the fit of experimental positron lifetime spectra for nanocrystallized glasses testify in favor of structural fragmentation of larger free-volume entities into smaller ones. Nanocrystallites of Ga 2 Se 3 and/or GeGa 4 Se 8 phases and prevalent GeSe…

Nanostructured metal/oxide coatings

2007

Al based nanocomposite coatings on Cu and glass substrates were obtained in the conditions of severe shear stresses by deformation scheme similar to that of friction. Structure, composition and micromechanical properties were investigated using AFM, XRD, SIMS, electron, optical microscopy and precision microindentation techniques. Coatings are characterized by the high microhardness and good adhesion to the substrates. This is determined by the formation of nanostructured Al-oxide composite stabilized by the presence of oxidized interlayers, which are barriers for the grain growth and intermetallic phase formation. The annealing in vacuum leads to the development of oxygen redistribution pr…

Growth and size distribution of Au nanoparticles in annealed Au/TiO2 thin films

2014

Abstract Nanocomposites consisting of noble metal nanoparticles (NPs) embedded in TiO2 thin films are of great interest for applications in optoelectronics, photocatalysis and solar-cells for which the plasmonic properties of the metal NPs play a major role. This work investigates the first stages of the formation of gold NPs by thermal annealing of Au-doped TiO2 thin films grown by magnetron sputtering. A low concentration of gold in the films is considered (5 at.%) in order to study the first stages of the formation of the NPs. Raman spectroscopy is used to follow the crystallization of TiO2 when increasing the annealing temperature. In addition, low-frequency Raman scattering (LFRS) is u…

Deformation behavior and interfacial sliding in carbon/copper nanocomposite films deposited by high power DC magnetron sputtering

2015

Abstract Amorphous carbon–copper nanocomposite films with a carbon content from 7 to 40 at.% have been deposited onto steel, silicon and glass substrates using a high power (> 60 W/cm 2 ) and high-rate DC magnetron sputtering technique. XRD, Raman spectroscopy and TEM results confirm that the deposited films consist of copper nanograins (size

In Situ Heating TEM Study of Onion-like WS2 and MoS2 Nanostructures Obtained via MOCVD

2007

We report on the in situ heating transmission electron microscopy (TEM) study of WS2 and MoS2 nanoparticles obtained from metal–organic chemical vapor deposition (MOCVD). The general behavior of MoS2 and WS2 is similar: Round, amorphous particles in the pristine sample transform to hollow, onion-like particles upon annealing. A second type of particle with straight layers exhibits only minor changes. A significant difference between both compounds could be demonstrated in their crystallization behavior. The results of the in situ heating experiments are compared to those obtained from an ex situ annealing process under Ar.