Search results for "Metalworking"
showing 10 items of 49 documents
Contributions regarding increasing reliability of beer industry installations using weld cladding in ultrasonic field
2016
Paper presents a new technology for availability increasing of different installation parts used in beer industry - ultrasonic activation of metal deposition by welding. The dilution phenomenon is studied linked on its influence upon material technological and functional properties in the three distinct zones of resulted couple (filler material, influenced thermal zone, base material). Experimental results performed on unidirectional valve are presented regarding variation of chemical composition concentration and dilution variation in three zones influenced by ultrasonic wave.
MoSi2 laser cladding—elaboration, characterisation and addition of non-stabilized ZrO2 powder particles
2003
International audience; The cladding process using laser beam radiation comprises different operational regimes, depending on the involved lasers (usually CO2 or Nd:YAG) and materials. A series of experiments has been carried out to investigate Nd:YAG laser cladding using MoSi2 powder. Procedures and operating parameters for producing clad layers has been developed and their properties evaluated. The feasibility of the laser cladding technique, using a high power Nd:YAG laser, by projecting MoSi2 powder on steel substrate was demonstrated. The results indicate a low density of cracks, elevated powder catchment efficiency (between 65 and 90%) and hardness values around 1200–1300 HV. Our goal…
Magnesium alloys (WE43 and ZE41) characterisation for laser applications
2004
International audience; One of the most important parameters in laser treatment is the quantity of beam energy absorbed by the substrate. Despite its important role played in laser processes, this factor is rarely available for the laser sources wavelengths and at high temperatures reached during such treatments. A series of experiments were carried out in order to characterise, from this point of view, two types of magnesium alloys, WE43 and ZE41, often used in laser applications (cladding, alloying, welding, etc.). The results represent an important step in order to understand Mg-alloys behaviour under laser beam action.
MoSi2 laser cladding—A new experimental procedure: double-sided injection of MoSi2 and ZrO2
2003
International audience; In the last decade, development of low density advanced material systems for service at temperatures up to 1300 °C was one of the goals of many researches. This kind of material should mainly have moderate fracture toughness and should exhibit oxidation resistant behaviour at low and intermediate temperature. One of the most studied materials continues to be the intermetallic compound MoSi2. The molybdenum disilicide has been considered as an attractive candidate due to its melting point (2030 °C) and excellent oxidation resistance at high temperatures. The main problem associated with the MoSi2 layer synthesized using laser beam is the layer fragility. To avoid this…
A Case for Raising the Camera: A Driving Simulator Test of Camera-Monitor Systems
2021
Objective This experiment provides a first-of-its-kind driving-simulator study to investigate the feasibility of camera-monitor systems (CMS) with displaced side-mounted cameras in sedans. Background Among the increasing number of studies investigating the replacement of side-mounted rearview mirrors with CMS, the placement of side-mounted cameras has been largely neglected. Moreover, user preferences with respect to camera placement have not been validated in a driving simulator. Past research merely has shown that the vertical camera position can affect distance perception. Method In a driving simulator experiment, we investigated the effects of rearward camera placement on driver accepta…
Real-time simulation and control system for the continuous casting process
2005
In this paper we present a real-time system which is used to simulate the unsteady-state continuous casting process and to control the secondary cooling water sprays. The aim of the control system is to keep the surface temperature of the slab constant with respect to time in spite of casting speed variations, and in this way minimize the formation of cracks in the final product. The simulator calculates the temperature distribution using a mathematical model based on a heat conduction formula with phase changes. The optimal spray water flow rates for each spray cooling zone will be calculated by minimizing the deviation between the target surface temperature and the calculated actual surfa…
Automatic Secondary Cooling Control for the Continuous Casting Process of Steel
1991
Two simulation models for finding the optimal secondary cooling strategy in continuous casting process are presented. The first one is a two-dimensional off-line model for optimizing steady state casting operation. The second one is a one-dimensional model which can be used for simulating casting operation in real-time during varying casting conditions.
Load Response and Finite Element Modelling of Bonded Loading Hoses
2014
Steel reinforced bonded vulcanized rubber loading hoses are frequently used in offshore oil loading systems. The hoses are used as offloading system between platforms and shuttle tankers and represent a flexible economical feasible solution for hydrocarbon transfer. The reliability of these hoses throughout the service life is an important issue both with respect to operational availability and with respect to environmental safety. Hence, the load bearing capacity of these hoses and the fatigue endurance become matters of concern and important design topics. Due to the large deformation of these hoses and the complicated composite structure in the hose wall, the hoses are difficult to analy…
Springback evaluation in fully 3-D sheet metal forming processes
1997
Abstract In the modern manufacturing industries the knowledge and proper control of the sheet metal springback after forming is a fundamental aspect in the achievement of near net shape stamped parts. In this paper an effective springback prediction in some fully three-dimensional stamping processes is carried out. Such a prediction is based on a combined approach in which an explicit finite element code has been employed to simulate the forming phase while a traditional implicit procedure has been used to analyse the springback phase. The results obtained have been compared with a set of experimental tests and an excellent correlation between the predicted and experimental data has been fo…
Investigation of thick sheet AHSS springback in combined bending under tension
2012
In this paper, we investigate the springback behavior of several advanced high-strength sheet steels (TRIP, Dual-Phase, ferrite-bainite) with thicknesses up to 4 mm. Samples were tested by means of the bending-under-tension (BUT) test. The BUT has been extensively applied, in the literature, to relatively thin (1 mm and thinner) sheet metals for automotive applications; the applicability of several guidelines from the literature was investigated in this work in the context of thick advanced high strength steel (AHSS) sheets and using a sample width of 12 mm. The monotonic decrease of springback as back force increased was confirmed for this category of sheet steels, and a general trend for …