Search results for "Microsimulation"

Surrogate Measures of Safety at Roundabouts in AIMSUN and VISSIM Environment

2018

This paper addresses issues on road safety analysis through microscopic traffic simulation models. The Surrogate Safety Assessment Model (SSAM) was applied to read vehicle trajectory files generated by two micro-simulators and then calculate surrogate measures of safety. Since safety assessment of any road entity can provide different results based on the micro-simulator which is used, the main objective of this research was to estimate the safety performance of three roundabout layouts and compare the conflict events simulated by AIMSUN and VISSIM. The two micro-simulators were used to build the calibrated models of the roundabouts, each fitting the corresponding empirical capacity functio…

Calibration of microscopic traffic simulation models for evaluating operation and safety performance at roundabouts

Passenger Car Equivalents for Heavy Vehicles at Roundabouts. a Synthesis Review

2019

Passenger Car Equivalents (PCEs in the following) are used to transform a mixed fleet of vehicles into a fleet of equivalent passenger cars and to analyze capacity and level-of-service of roads and intersections. Most roundabouts guidelines propose constant values for PCEs but a single PCE value can result improper under heterogeneous traffic conditions. PCEs should be vary with traffic and road conditions and consequently PCEs applied to undersaturated traffic conditions can overestimate the heavy vehicle effect or be not sensitive to the traffic level or characteristics of heavy vehicles. Compared to other at-grade intersections, the interaction between the operational performances of the…

Estimation of Passenger Car Equivalents for Two-Lane and Turbo Roundabouts Using AIMSUN

2020

The paper addresses issues related to Passenger Car Equivalents (PCEs) at roundabouts. Compared to other road units, the curvilinear elements of roundabout geometric design may impose greater constraints on vehicular trajectories and have a significant effect on the swept envelope of heavy vehicles. Specifically, the aim of the paper is to present the methodological approach which used traffic microsimulation to estimate PCEs. Focus is made on a case study which considered the conversion of a two-lane roundabout into a basic turbo roundabout with comparable size. Empirical capacity functions for both roundabouts were derived as target values to which simulated capacities by lane were compar…

Assessing the Environmental Performances of Urban Roundabouts Using the VSP Methodology and AIMSUN

2022

In line with globally shared environmental sustainability goals, the shift towards citizen-friendly mobility is changing the way people move through cities and road user behaviour. Building a sustainable road transport requires design knowledge to develop increasingly green road infrastructures and monitoring the environmental impacts from mobile crowdsourced data. In this view, the paper presents an empirically based methodology that integrates the vehicle-specific power (VSP) model and microscopic traffic simulation (AIMSUN) to estimate second-by-second vehicle emissions at urban roundabouts. The distributions of time spent in each VSP mode from instantaneous vehicle trajectory data gathe…

Developing Passenger Car Equivalents for Freeways by Microsimulation

2015

Abstract In this paper a method of estimation of the passenger car equivalents for heavy vehicles on freeway is described. The variation in traffic quality was evaluated basing on a traffic demand characterized by different percentages of heavy vehicles. Aimsun micro-simulator was used to isolate traffic conditions difficult to capture on field, to replicate them to have a number of data as much as possible numerous, and to quantify the fundamental variables of traffic flow, namely the speed, flow, density, for a test freeway segment. Model calibration was accomplished by using traffic data collected at observation sections on the A22 Brenner Freeway, Italy. In order to check to what extent…

Microsimulation-based passenger car equivalents for heavy vehicles driving turbo-roundabouts

2016

Due to its geometric design, turbo-roundabouts impose greatest constraints to the vehicular trajectories; by consequence, one can expect a more unfavourable impact of heavy vehicles on the traffic conditions than on other types of roundabouts. The present paper addresses the question of how to estimate Passenger Car Equivalents (PCEs) for heavy vehicles driving turbo-roundabouts. The microsimulation approach used revealed as a useful tool for evaluating the variation of quality of traffic in presence of mixed fleets (different percentages of heavy vehicles). Based on the output of multiple runs of several scenarios simulation, capacity functions for each entry lane of the turbo-roundabout w…

Las deducciones autonómicas en el IRPF: análisis y alternativas

2009

RESUMEN En este trabajo llevamos a cabo un ejercicio de microsimulación para analizar la política autonómica en el IRPF, utilizando la Muestra IRPF 2002 IEF-AEAT. Hasta el momento las Comunidades Autónomas han utilizado las deducciones como instrumento principal para modificar el IRPF. Sin embargo parece que las deducciones autonómicas llevan aparejados elevados costes de diseño, legislativos y administrativos; mientras que sus beneficios afectan poco a pocos contribuyentes. Nuestra hipótesis es que se puede alcanzar un resultado similar con unos costes menores. Para ello hemos considerado dos alternativas, sin duda más sencillas: una ligera reducción de los tipos impositivos de las tarifas…

Evaluation of Roundabout Safety Performance through Surrogate Safety Measures from Microsimulation

2018

The paper presents a microsimulation-based approach for roundabout safety performance evaluation. Based on a sample of Slovenian roundabouts, the vehicle trajectories exported from AIMSUN and VISSIM were used to estimate traffic conflicts using the Surrogate Safety Assessment Model (SSAM). AIMSUN and VISSIM were calibrated for single-lane, double-lane and turbo roundabouts using the corresponding empirical capacity function which included critical and follow-up headways estimated through meta-analysis. Based on calibration of the microsimulation models, a crash prediction model from simulated peak hour conflicts for a sample of Slovenian roundabouts was developed. A generalized linear model…

Editorial: Calculation of Passenger Car Equivalents at Roundabouts

2021

Editorial on the Research Topic: Calculation of Passenger Car Equivalents at Roundabouts About this Research Topic: Calculation of Passenger Car Equivalents (PCEs) for heavy vehicles represents the starting point for the operational analysis of road facilities and other traffic management applications. PCEs are used to consider the presence of heavy vehicles in the traffic stream and are expressed as multiples of the effect of an average passenger car. Moreover, the highly curvilinear nature of the roundabout design, both in urban and rural environment, has significant effects on the paths that heavy vehicles would travel; as a consequence, the interaction between the physical and performan…