Search results for "Microstructure"
showing 10 items of 707 documents
Studies of Mechanical Treatment on Surface Charge of Bioactive Composites
2008
Composite materials containing a bioactive phase (sol-gel-derived bioglass) and a mechanical strength phase (aluminum oxide-porous corundum) are promising materials for repair of living tissues. The influence of mechanical treatment of composite structure containing sintered corundum and CaOSiO2-P2O5 glass system was examined by exoelectron emission and electrokinetic’s potential method. The microstructure of the biocomposite material, its mechanical properties and the processing techniques used are all very strongly interrelated.. The charge layer generated on the surface of the composite biomaterials upon deformation and the type of the electrical charge in implants plays significant role…
Laser-induced damage in cold-sprayed composite coatings
2011
International audience; Ag-Ni composite coatings were achieved using the cold spray process. In this work, two blends were sprayed to lead to coatings with different mechanical properties, which corresponded to either a fine or a coarse microstructure. These coatings were studied using SEM and X-ray microtomography (XMT) to determine the best coating quality through characterization of particle-to-particle bonding. The fine microstructure showed better properties than the coarse microstructure. To avoid time-consuming characterization techniques such as SEM and XMT, an innovative laser characterization test was developed. The principle of this test is based on the thermal shock-induced by a…
Ferroelectric Behavior in Epitaxial Films of Relaxor PbMg1/3Nb2/3O3
2004
The nonlinear dielectric response of epitaxial thin films of relaxor ferroelectric PbMg1/3Nb2/3O3 was experimentally studied using digital Fourier analysis. Change from glass-like to ferroelectric behavior was detected in a broad temperature range, at relatively low ac and/or dc electric fields, and at a time scale of seconds. The presence of interfaces and peculiar microstructure of thin films are suggested to determine such a specific behavior.
ANNEALING EFFECT ON COERCIVITY AND MICROHARDNESS IN SINTERED (Nd, Tb)15(Fe, Co, Al)78B7 MAGNETS
1999
The variation of the coercivity and microhardness with annealing (475–1150°C/3.6 ks) of sintered (Nd, Tb) 15 (Fe, Co, Al) 78 B 7 permanent magnet have been investigated. The data indicate that the coercivity reaches the mininum and the maximum at 600°C and 775°C, respectively. Optical and scanning electron microscopy and magnetic domain structure observations give no hints to any change in microstructure. Fitting of the Mössbauer spectra of permanent magnets for different coercivity ( i H c ) values revealed that magnetic hyperfine fields (B Hf ) on all Fe sites are reduced with the increase in i H c value and the higher value of the i H c corresponds to the higher value of the Mössbauer l…
Mechanical behaviour of natural cow leather in tension
2009
We study experimentally the microstructure and mechanical behavior of natural cow leather. Tensile tests are performed using leather strips to observe their deformation, creep and failure. It is found that the microstructure of cow leather is a layered, complicated network of fibers of different sizes from a few to a few hundreds of nanometers in diameter. They show nonlinear stress-strain relations and viscoelastic behavior. The effect of humidity is also examined. A simple theoretical model of a multilayered beam is proposed to describe the most basic behavior in tension.
Optimization of two-step techniques engineered for the preparation of polyamide 6 graphene oxide nanocomposites
2019
Abstract Different processing conditions to achieve polyamide 6 (PA6)-graphene oxide (GO) nanocomposites were investigated. GO was pre-dispersed in PA6 by three different solvent-based methods and, further, melt processed to prepare nanocomposites at two different loading levels, namely 2 and 5 wt.%. The evolution of rheological and mechanical properties was analyzed by investigating eventual changes in the microstructure and polymer crystallinity, aiming at providing a detailed processing-structure-properties relationship for these systems.
Synthesis and catalytic performance in ethylene and 1-octene polymerization of chlorotitanium(IV) silsesquioxane complexes. Effect of increasing liga…
2016
Abstract The series of titanasilsesquioxanes that differ in a way of binding to the transition metal ( via one, two or three oxygen atoms) and type of nonreactive substituents bonded to inorganic oxygen-silicon cage ( i -Bu, Ph, c -C 6 H 11 ) were prepared by reacting of TiCl 4 with 1 eqv. of the silsesquioxane ligand. Upon treatment with an appropriate cocatalyst, all titanium precatalysts are active in ethylene and 1-octene polymerization and produce from low to high molecular weight polyethylenes and moderately ([ mmmm ] = 44–74%) isotactic poly(1-octene)s. The influence of polymerization parameters, type of cocatalyst and the silsesquioxane structure on the catalytic behavior of the tit…
Oxidation of nanocrystalline aluminum by variable charge molecular dynamics
2010
International audience; We investigate the oxidation of nanocrystalline aluminum surfaces using molecular dynamics (MD) simulations with the variable charge model that allows charge dynamically transfer among atoms. The interaction potential between atoms is described by the electrostatic plus (Es+) potential model, which is composed of an embedded atom method potential and an electrostatic term. The simulations were performed from 300 to 750K on polycrystalline samples with a mean grain size of 5 nanometers. We mainly focused on the effect of the temperature parameter on the oxidation kinetic. The results show that, beyond a first linear regime, the kinetics follow a direct logarithmic law…
Physical and electrochemical properties of LiFePO4/C thin films deposited by direct current and radiofrequency magnetron sputtering
2011
Abstract In this study, LiFePO 4 /C thin films with various contents of carbon were prepared by direct current (DC), radiofrequency (RF) and combined (DC/RF) magnetron sputtering methods. Influences of the composition, morphology and microstructure on the electrochemical properties of LiFePO 4 /C thin films are investigated by studying charge–discharge curves, cyclic voltammetry and electrochemical impedance spectroscopy. Cyclic voltammogram of the LiFePO 4 /C thin film showed the typical redox reaction peaks characterizing the electrochemical lithium insertion/extraction reactions in LiFePO 4 . Obtained LiFePO 4 /C thin films have relatively high charge capacities (127 mAh g − 1 ). It was …
Large scale synthesis of nanostructured zirconia-based compounds from freeze-dried precursors
2013
Nanocrystalline zirconia powders have been obtained at the multigram scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous acetic solutions. This technique has equally made possible to synthesize a variety of nanostructured yttria or scandia doped zirconia compositions. SEM images, as well as the analysis of the XRD patterns, show the nanoparticulated character of those solids obtained at low temperature, with typical particle size in the 10–15 nm range when prepared at 673 K. The presence of the monoclinic, the tetragonal or both phases depends on the temperature of the thermal treatment, the doping concentration and the nature of the dopant. In addition,…