Search results for "Microstructure"
showing 10 items of 707 documents
The Luminescence Properties of ZnO:Al Nanopowders Obtained by Sol-gel, Plasma and Vaporization-Condensation Methods
2007
ZnO nanocrystals were synthesized and characterized by XRD and SEM methods. The luminescence spectra and decay kinetics were studied under pulsed laser excitation (266 nm, 8 ns). ZnO and ZnO:Al powders were prepared by sol-gel and plasma chemical synthesis. These powders were used as a raw material for the SPVD (Solar Physical Vapour Deposition) process. In this way, the vaporisation-condensation phenomenon (VC) led to the formation of ZnO whiskers and nanopowders. The luminescence properties of the VC nanopowders were studied and compared to those displayed by the raw material. The Al dopant, present in the raw powders as a solid solution and ZnAl2O4 precipitates, was only present as Al io…
SYNTHESIS AND CHARACTERIZATION OF SB-SUBSTITUTED (K0.5Na0.5)NbO3 PIEZOELECTRIC CERAMICS
2008
ABSTRACT Lead-free piezoelectric ceramics (K0.5Na0.5)(Nb1-xSbx)O3+0.5 mol.%MnO2, where x = 0 ÷ 0.10, with single phase structure and rhombohedral symmetry at room temperature were prepared by conventional ceramic technology. The optimal sintering temperatures of compositions were within 1100°–1140°C. MnO2 functions as a sintering aid and effectively improves the densification. The samples reached density from 4.26 g/cm3 for undoped (K0.5Na0.5)NbO3 to 4.40 g/cm3 for Mn/Sb5+ co-doped ceramics. The co-effects of MnO2 doping and Sb5+ substitution lead to significant improvement in dielectric and piezoelectric properties: e at the Tc increased from 6000 (KNN) to 12400 (x = 0.04), d33 = 92 ÷ 192 …
SINTERING OF LEAD-FREE (K0.5Na0.5)NbO3 BASED SOLID SOLUTION
2009
ABSTRACT In this study lead-free solid solution (K0.5Na0.5)NbO3 was prepared, structure, dielectric parameters of ceramics were investigated. The doping of sintering aids did not affect the crystallographic structure of the ceramics significantly; all ceramic samples had a single-phase perovskite structure. Added elements CdO, ZnO, MnO2, V2O5 effectively decreased the sintering temperature of KNN by 50°–80°C. All sintering aids influenced sinterability, microstructure and dielectric properties of ceramics. Dielectric constant for doped samples increased from 6000 up to 8000; Pr = 15 μC/cm2, Ec = 9 kV/cm, d33 = 110 pC/N, kp = 0.38 and Qm = 190 for MnO2 doped samples.
Te-As-Se glass microstructured optical fiber for the middle infrared
2009
International audience; We present the first fabrication, to the best of our knowledge, of chalcogenide microstructured optical fibers in Te-As-Se glass, their optical characterization, and numerical simulations in the middle infrared. In a first fiber, numerical simulations exhibit a single-mode behavior at 3.39 and 9.3 μm, in good agreement with experimental near-field captures at 9.3 μm. The second fiber is not monomode between 3.39 and 9.3 μm, but the fundamental losses are 9 dB/m at 3:39 μm and 6 dB/m at 9.3 μm. The experimental mode field diameters are compared to the theoretical ones with a good accordance.
Formulation and validation of a reduced order model of 2D materials exhibiting a two-phase microstructure as applied to graphene oxide
2018
Abstract Novel 2D materials, e.g., graphene oxide (GO), are attractive building blocks in the design of advanced materials due to their reactive chemistry, which can enhance interfacial interactions while providing good in-plane mechanical properties. Recent studies have hypothesized that the randomly distributed two-phase microstructure of GO, which arises due to its oxidized chemistry, leads to differences in nano- vs meso‑scale mechanical responses. However, this effect has not been carefully studied using molecular dynamics due to computational limitations. Herein, a continuum mechanics model, formulated based on density functional based tight binding (DFTB) constitutive results for GO …
MICRO-SCALE STUDY OF RESIDUAL STRESSES IN CR2O3 COATINGS SPRAYED BY APS
2020
International audience; Whichever the application field, every material forming process generates residual stresses on the surface. While they are likely to enhance the aimed properties of the final mechanical part, these stresses may also drastically reduce them and result in early failures. Therefore, understanding the residual stress state remains a major challenge when coating complex parts, especially as most characterization methods at the microscopic scale involve specific sample preparation procedures which may affect the residual stresses field. This work investigates the residual stress state that exists in chromium oxide coatings deposited via Atmospheric Plasma Spray (APS), usin…
Engineering the crack path in lattice cellular materials through bio-inspired micro-structural alterations
2019
Abstract A computational study on the fracture behaviour of bio-inspired finite-size lattice configurations is performed in this work. The study draws inspiration from recent investigations aimed at increasing the fracture energy of some materials through small modifications of their microstructure. The main question here is whether it is possible, to some extent, to engineer the crack path in metallic cellular materials through such small micro-structural modifications and how to quantify the effect of alternative strategies. Nature provides several examples of strategies used to delay or arrest damage and crack propagation. One striking example is given by the micro-architecture of severa…
Friction Stir Processing of NiTi Shape Memory Alloy: Microstructural Characterization
2010
Shape Memory Alloys (SMA) are metal materials that, after being strained, come back to their original shape at a designated temperature. Welding NiTi alloys is not simple because when the material is melted, due to the high reactivity of the alloy elements, the typical shape memory properties may disappear. The solid state welding process, such as friction stir welding, is thus attractive for SMA joining and it exhibits potentials for achieving welded joints affected by microstructural changes that preserve the shape memory properties. The present study investigates the feasibility of friction stir welding process to join NiTi shape memory alloys; in order to analyse the welding process, it…
Scanning Probe Microscopy Study of the Metal-Rich Layered Chalcogenides TaM2Te2 (M = Co, Ni)
1998
The compounds TaNi2Te2 and TaCo2Te2 have been examined by scanning tunneling and atomic force microscopy. The title phases crystallize in layered structures with metal slabs sandwiched by tellurium atoms. Scanning probe microscope images of the surfaces of these materials arise from the surface tellurium atoms anddepending on the experimental conditionscan show very different features. The images have been simulated through surface charge densities calculated within the Extended Huckel and LMTO frameworks.
Role of plastic deformation and microstructure in the micro-electrochemical behaviour of Ti–6Al–4V in sodium chloride solution
2013
Abstract The role of alloying elements and the influence of plastic deformation on the micro-electrochemical behaviour and the pitting corrosion susceptibility of TiAl6V4 have been investigated in 10 g/L NaCl using the electrochemical microcell technique. Local electrochemical measurements have revealed that both the increase of surface roughness and the increase of dislocation density have impact on the electrochemical behaviour of TiAl6V4 after plastic deformation. It has been shown the surface roughness induced by slip band emergence is the predominant parameter responsible for the increase of the cathodic current. It has also been shown that cathodic reactions occur preferentially at su…