Search results for "Mineral"
showing 10 items of 2711 documents
Cr- and Sb-containing TiO 2 inorganic orange nano-pigments prepared by a relative long hydrocarbon chain polyol
2016
Abstract We report the preparation of a series of orange Cr- and Sb-containing TiO 2 nano-pigments by the polyol via using triethylenglycol (TEG). Poorly crystallized anatase nanopowders with nominal stoichiometric compositions Cr x Sb x Ti 1−2x O 2 , with 0 ≤ x ≤ 0.2, were obtained by heating at 180 °C a solution of antimony acetate, chromium acetylacetone and titanium butoxide in TEG. The transition temperature of the chromium- and antimonium-containing anatase nanoparticles into the rutile crystalline form occurred over the range of temperature between 500 and 650 °C, depending on the dopant amount. After annealing at 800 °C for short time the series of samples displaying the rutile stru…
Nature of Interactions at the Interface of Two Water-Saturated Commercial TiO2 Polymorphs
2013
Two commercial TiO2 samples, a 100% anatase and a 100% rutile, were used for the fast field cycling NMR experiments. The results showed a different behavior between the different samples. In particular, water molecules were unbonded to the solid surface for the rutile sample, whereas they appeared to chemically interact with the surface through H-bond formation with the anatase sample. The above findings accord with the generally lower activity of rutile with respect to anatase reported in literature for photocatalytic oxidation reactions in water. The difficulty of water to interact with rutile surface, indeed, could hinder the formation of OH radicals, which are the most important oxidant…
Preparation characterization and photocatalytic activity of polycrystalline ZnO/TiO2 systems. 1. Surface and bulk characterization
2001
Polycrystalline ZnO/TiO2 solids have been prepared with four different methods using home prepared TiO2 (anatase) or TiO2 (rutile) as supports and Zn(NO3)2·6H2O or Zn(CH3COO)2·2H2O as precursors for ZnO. The bulk and surface properties of the samples were investigated by means of TG-DTA, XRD, TEM, SEM-EDAX, XPS, BET surface area determination, and porosity measurements. XRD and TEM results indicate that no significant defect structures exist in any of the samples. The ZnO crystallinity and its enrichment on the surface of TiO2 particles were dependent on the preparation method. The surface areas generally decrease by increasing the amount of ZnO except when ZnO from Zn(CH3COO)2·2H2O was sup…
Preparation and photoactivity of nanostructured anatase, rutile and brookite TiO2 thin films
2006
Photoactive films consisting of pure anatase, brookite or rutile TiO2 were prepared by dip coating from water dispersions obtained by using TiCl4 as the precursor under similar mild experimental conditions
Hydrothermal-mediated synthesis of orange Cr, Sb-containing TiO 2 nano-pigments with improved microstructure
2017
Abstract A hydrothermal-mediated via was developed to prepare discrete, non-aggregated Cr,Sb-doped rutile nano-pigments. After annealing the Cr- and Sb-containing TiO2 anatase nanocrystals obtained by hydrothermal aging the nano-pigments Cr,Sb-TiO2 were characterized with the aid of X-ray diffraction (XRD) including lattice parameter and crystallite size determination, Raman spectroscopy, field emission scanning and transmission electron microscopies (FESEM and TEM, respectively) including energy-dispersive X-ray (FESEM/EDX) spectroscopy, high resolution transmission electron microscopy (HRTEM) including selected area electron diffraction (SAED), ultraviolet–visible diffuse reflectance (UV–…
Hydrothermal synthesis of nanostructured inorganic powders by a continuous process under supercritical conditions
2005
Abstract In this study, using a prototype of hydrothermal synthesis in subcritical and supercritical water working in a continuous way, nanometric ceramic precursors with perfectly defined composition are produced: spinel ferrites such as Fe2CoO4, TiO2 with anatase structure and also perovskite structures such as BaZrO3. The as-prepared powders are fully characterized by complementary experiments: X-ray diffraction, electron microscopies, EDX spectrometry, surface area measurement, etc. Thus, particles size, morphology, aggregation state, crystal structure, composition are investigated. Moreover, magnetic properties of the ferrites products are studied. The powders obtained are pure phases …
Photocatalytic Degradation of 4-nitrophenol in aqueous suspension by using polycristalline TiO2 samples impregnated with a Cu(II)-phthalocyanine
2002
In this paper, the preparation of polycrystalline TiO2 samples impregnated with a modified Cu(II)-phthalocyanine (TiO2–CuPc) is reported along with an investigation on the photocatalytic behavior of this system compared with bare TiO2 (both in the anatase and rutile form) and with TiO2 samples impregnated with not functionalized commercial phthalocyanine (TiO2–CuPc) or with metal free phthalocyanine (TiO2–Pc). The photocatalytic degradation of 4-nitrophenol (4-NP) was studied as a probe reaction. The presence of modified CuPc showed to be beneficial only for TiO2 (anatase) while the commercial not functionalized CuPc also slightly for both TiO2 (anatase) and TiO2 (rutile). The metal free Pc…
Nanostructured Solids from Freeze-Dried Precursors: Multigram Scale Synthesis of TiO2 -Based Powders
2012
Nanocrystalline TiO2 and Ti1−xVxO2 (x = 0.01) powders have been prepared by thermal decomposition, in air, of amorphous precursors resulting from the freeze-drying of appropriate solutions. In addition, TiO2−xNy (anatase and rutile) and TiOxNy (rock-salt) have been prepared by thermal treatment in ammonia of a crystalline precursor (TiO2 obtained at 673 K). TEM and SEM images, as well as the analysis of the X-ray diffraction (XRD) patterns, show the nanoparticulated character of those solids obtained at low temperatures, with typical particle sizes in the 10–20 nm range when prepared at 673 K. The UV–Vis results indicate both the insertion of V in the anatase lattice and the feasibility of …
A recipe for the use of rutile in sedimentary provenance analysis
2012
Abstract Rutile has received considerable attention in the last decade as a valuable petrogenetic indicator mineral. Based on both new and previously published data, we carve out advantages and pitfalls regarding TiO 2 -minerals in sedimentary provenance analysis. This results in a recipe for the use of rutile in provenance studies. The main points are: Rutile geochemistry from different grain size fractions does not differ systematically, and hence rutiles should be extracted from the fraction containing the most rutile grains (usually 63–200 μm). Similarly, different magnetic susceptibility of rutile does not systematically imply different trace element composition. Before interpretation …
Photocatalytic activity of anatase-nickel ferrite heterostructures
2015
The simple co-precipitation route was used to couple commercial TiO2 anatase nanopowder with nickel ferrite (NiFe2O4). The morphology and the crystalline structure of composite nanoparticles were characterised by TEM, N2 adsorption-desorption, XRD and Rietveld refinement, XPS and XAS. The optical and magnetic properties were investigated. After co-precipitation NiFe2O4 nanoparticles, composed of spinel ferrite crystal phase, were formed on the surface of TiO2 anatase nanopowder. The TiO2/NiFe2O4 composite oxide demonstrated large specific surface area, high visible light absorption efficiency and efficient charge carrier separation, compared to pristine anatase TiO2 or pristine NiFe2O4, rep…