Search results for "Modelling"
showing 10 items of 1353 documents
A Handy Stress-Strain Law for FRP Confined Concrete
2006
Influence of wall-to-floor connections and pounding on pre- and post-diction simulations of a masonry building aggregate tested on a shaking table
2023
AbstractThis paper presents numerical simulations within the frame of the project SERA—AIMS (Seismic Testing of Adjacent Interacting Masonry Structures). The study includes blind pre-diction and post-diction stages. The former was developed before performing the shaking table tests at the laboratory facilities of LNEC (Lisbon), while the latter was carried out once the test results were known. For both, three-dimensional finite element models were prepared following a macro-modelling approach. The structure consisted of a half-scaled masonry aggregate composed by two units with different floor levels. Material properties used for the pre-diction model were based on preliminary tests previou…
Simulation of blind pre-diction and post-diction shaking table tests on a masonry building aggregate using a continuum modelling approach
2023
AbstractMasonry buildings of historical centres are usually organized within aggregates, whose structural performance against seismic actions is challenging to predict and constitutes still an open issue. The SERA—AIMS (Seismic Testing of Adjacent Interacting Masonry Structures) project was developed to provide additional experimental data by testing a half-scale, two-unit stone masonry aggregate subjected to two horizontal components of dynamic excitation. In this context, this paper investigates the reliability of the modelling approach and the assumptions adopted to generate a three-dimensional continuum finite element model. The work involves two stages, namely a blind pre-diction and a…
A new FEM approach for FRP-strengthened RC frames
2017
Owing special mechanical properties has made Fiber Reinforced Polymer (FRP) as one of the best strengthening materials for Reinforced Concrete (RC) structures. The effect of externally applied FRP sheets on RC elements has been the topic of many experimental investigations. On the other hand, simulating the behavior of RC structures strengthened by means of externally bonded FRP sheets is yet to be scrutinized. In this work, a new Finite Element (FE) procedure for inelastic analysis of RC structures has been enriched to account the presence of externally bonded FRP sheets on RC sections. The proposed FE procedure works in the framework of lumped plasticity. It is able to identify the exact …
Simplified equivalent finite element modelling of concrete-filled steel tubular K-joints with and without studs
2022
Concrete Filled Steel Tubular (CFST) K-joints employed for truss structures gained high interest in the last years due to their widespread use in engineering practice. The overall performances of these joints can be efficiently improved by using steel studs welded in the inner surface of the steel chord filled with the concrete, avoiding punching shear failure, and improving the overall strength and ductility. However, a reliable prediction of the structural behavior of the joints is outmost of importance for the assessment of the capacity of new and existing structures, and there are no standardized design methods nowadays. In this paper, the structural performances of CFST K-joints with a…
Out of Plane response of Unreinforced Masonry infills: Comparative analysis of experimental tests for the definition of strategies of macro modelling…
2022
During an earthquake, an interaction between the in-plane and out-of-plane seismic forces occurs and the infilled frames suffer damage in both in-plane and out-of-plane directions simultaneously. Particularly, the out-of-plane collapse of unreinforced masonry infill walls is critical even for new buildings complying with the modern seismic codes, resulting in high casualties and huge economic losses. However, the out-of-plane behaviour of infill walls is yet not fully understood. This study is therefore aimed towards characterizing the out-of-plane seismic capacity of unreinforced masonry infill walls. First of all, available out-of-plane experimental tests performed on unreinforced masonry…
Modelling steel jacketed RC columns: Remarks by experimental-numerical comparisons
2015
The recent large use of nonlinear seismic assessment techniques requires the definition of highly reliable computational models. The retrofitting or strengthening of RC columns by steel angles and battens is a commonly adopted technique, used to improve strength and deformation capacity of existing RC buildings. In the case of steel angles not directly loaded, the numerical definition of the cross-section model has to be handled carefully since it is affected by more uncertainties. The vertical load carried by the angles is a function of the lateral confinement pressure, the cohesion and the friction coefficient between the materials, parameters which are not always easy to predict. The pap…
Travi reticolari miste- Problemi locali nella trasmissione degli sforzi
2009
Experimental test results on the local behavior of the typical Italian typology of hybrid steel-to-concrete beam are presented and discussed in order to provide insight on transfer mechanism between different components of the beam. Preliminarily, in order to investigate on the bearing capacity of the welding and on the local instability problems that can arise in the trusses before concrete casting, tensile tests on specimens reproducing different types of welded joints, and push-out tests on bare specimen have been performed. Then, the transfer mechanism between steel trusses and concrete is investigated by means of push-out tests carried out also in displacement controlled mode. Results …
A numerical study on the effect of the interface material model on the tensile behaviour of FRCM strips
2019
Fibre Reinforced Cementitious Matrix (FRCM) composites are becoming increasingly popular for strengthening masonry structures for which the compatibility of the inorganic matrix with the chemical and physical properties of the support makes it advantageous to adopt such systems. However, despite the large use of FRCMs for strengthening applications, the characterization and modelling of the mechanical response in tension of these systems is an open issue. In fact, the constitutive tensile law of the composite shows to be affected by different variables, such as the clamping system adopted during tensile test, the gauge length used for recording strains, the monitoring of the number of yarns…
Architectural library. Dioscuri Temple in Agrigento
2013
This paper presents the synthesis of research about the ICT solution for cultural heritage through the innovative technology of representation and survey. One objective was to identify a method of processing data for knowledge, dissemination and preservation of the asset. Historical analysis, surveying, photogrammetry and laser scanner, the processing of survey data and modelling are all focused to the same final purpose. The methodology developed for this application framework becomes adoptable in General for Cultural Property, which become in turn the protagonists of 3D WebGIS.