Search results for "Modulus"
showing 10 items of 491 documents
An experimental method for the investigation of rigid polyurethane foams in shear
2018
Widespread applications of rigid polyurethane and plastic foams lead to shear deformations. Therefore, methods for ensuring shear using experimental investigations are necessary, including the possibility of determining the shear modulus, strength and limit angle. Therefore, a device that allows investigating the shear properties of highly porous plastic foams was developed. The proposed device comprises a clip-on extensometer, commonly exploited in uni-axial compression/tension tests, for the determination of the shear displacement directly on the foams’ sample, on a measurement zone of certain dimensions and location. An innovative construction of the extensometer’s legs is elaborated, p…
Processing, structure, property relationships and release kinetics of electrospun PLA/Carvacrol membranes
2018
Abstract In this work, polylactic acid (PLA) membranes at two different carvacrol (CRV) nominal concentration (i.e. 14 wt% and 28 wt%) were prepared via electrospinning technology. The membranes were characterized by scanning electron microscopy, ATR-FTIR and calorimetric measurements as well as tensile tests. Moreover, the release kinetics of CRV in phosphate buffered solution at 37 °C was monitored through UV–Vis measurements and the data were fitted with a power law model. Results indicated that the successful incorporation of CRV in the polymer matrix damaged the fibers morphology but increased all the mechanical parameters investigated (i.e. elastic modulus, tensile strength and elonga…
Redox-Responsive and Thermoresponsive Supramolecular Nanosheet Gels with High Young's Moduli
2018
Supramolecular gels made from 2D building blocks are emerging as one of the novel multifunctional soft materials for various applications. This study reports on a class of supramolecular nanosheet gels formed through a reversible self-assembly process involving both intramolecular folding and intermolecular self-assembly of poly[oligo(ethylene glycol)-co-(phenyl-capped bithiophenes)]. Such hierarchical self-assembled structure allows the gels to switch between sol and gel states under either redox or thermostimulus. Moreover, the gels illustrate high Young's moduli, compared to their controls that are made from the same oligo(ethylene glycol) and phenyl-capped bithiophenes blocks but have h…
Effect of the additive level and of the processing temperature on the re-building of post consumer pipes from polyethylene blends
2007
Abstract One of the main shortcomings of the mechanical recycling is that the properties of the secondary materials are generally sensibly inferior with respect to the virgin ones. This feature implies, for sure, that they cannot be used for the same technological application but also other uses of the secondary material are impossible. The aim of this work is to study the re-building of recycled post-consumer pipes, made of a blend of different polyethylenes, by re-processing in the presence of a nitroxyl compound as radical generator. The processing temperature and the additive concentration have been varied in order to study the effect of these parameters on the final properties. The mec…
Linking structure and nanomechanical properties via instrumented nanoindentations on well-defined and fine-tuned morphology poly(ethylene)
2009
Several poly(ethylene) samples with a broad range of morphologies were studied in this work using nanoindentations. The samples had degrees of crystallinity ranging from 30 to 100% while their Young's modulus ranged from few tens of MPa up to several GPa. Experimental conditions for the correct evaluation of Young's modulus were at first identified, choosing a suitable loading rate in order to minimize viscoelastic effects on the unloading. The force curves, i.e., plots of applied load vs. penetration depth, were then analyzed following two common procedures available in the literature. None of these procedures leads to satisfying results when compared to other experimental techniques. Howe…
Investigation on the Properties and on the Photo-Oxidation Behaviour of Polypropylene/Fumed Silica Nanocomposites
2021
This work investigates the effects of very small amounts of fumed silica on the morphology and on the rheological and mechanical behaviour of polypropylene nanocomposites and on their photo-oxidation behaviour. Polypropylene nanocomposites were prepared using a twin-screw corotating extruder with 0, 1 and 2 wt/wt% of SiO2. Morphological, mechanical, thermomechanical and rheological properties were examined. It was found that the viscosity of the matrix is reduced by the presence of the silica nanoparticles, suggesting a poor adhesion between the two phases and probably some lubricating effect. On the contrary, the mechanical and, in particular, the thermomechanical properties of the matrix …
Effect of Moisture Content on the Processing and Mechanical Properties of a Biodegradable Polyester
2021
This work is focused on the influence of moisture content on the processing and mechanical properties of a biodegradable polyester used for applications in injection molding. The pellets of the biodegradable polyester were exposed under different relative humidity conditions at a constant temperature before being compression molded. The compression-molded specimens were again placed under the above conditions before the mechanical testing. With all these samples, it is possible to determine the effect of moisture content on the processing and mechanical properties separately, as well as the combined effect of moisture content on the mechanical properties. The results obtained showed that th…
Reversible Modulation of Elasticity in Fluoroazobenzene-Containing Hydrogels Using Green and Blue Light.
2017
Hydrogels are soft materials that have found multiple applications in biomedicine and represent a good platform for the introduction of molecular switches and synthetic machines into macromolecular networks. Tuning their mechanical properties reversibly with light is appealing for a variety of advanced applications and has been demonstrated in the past; however, their activation typically requires the use of UV light, which displays several drawbacks related to its damaging character and limited penetration in tissues and materials. This study circumvents this limitation by introducing all-visible ortho-fluoroazobenzene switches into a hydrophilic network, which, as a result, can be activat…
Recycled Polycarbonate Blend as Matrix for Development of Polymer Nanocomposite
2012
Summary: Secondary polycarbonate (SPC) is modified with various amounts (5, 10, 30 wt%) of ethylene vinyl acetate copolymer (EVAc) in order to reduce its brittleness. It is observed that at optimal EVAc weight content maximum tensile strength σM and impact strength AI increse by 14% (ωEVAc = 5 wt%) and 450% (ωEVAc = 10 wt%) in comparison to neat SPC, respectively. Addition of montmorillonite nanoclay (MMT) allowed further increase of elastic modulus E, strength and creep resistance of the investigated SPC blend with 10 wt% of EVAc.
Oscillatory measurements for salad dressings stabilized with modified starch, xanthan gum, and locust bean gum
2006
The rheological properties of low-oil-content food emulsions were analyzed with oscillatory tests within the linear viscoelastic region. The formulations of these salad dressings usually include modified starch because of its low cost and the special creamy texture that it affords. The combination of starch with other natural gums may improve the quality of the product. A reference emulsion containing 4% modified starch and four other formulations in which the starch was partially replaced by xanthan gum (0.4%), locust bean gum (0.4%), and synergistic blends of these gums (0.03 + 0.03% or 0.1 + 0.1%) were formulated. Gels before emulsification were studied for comparative purposes. All syst…