Search results for "Mono"
showing 10 items of 6843 documents
Crystalline CO2 -Based Aliphatic Polycarbonates with Long Alkyl Chains
2018
Carbon dioxide (CO2 ) is an easily available, renewable carbon source and can be utilized as a comonomer in the catalytic ring-opening polymerization of epoxides to generate aliphatic polycarbonates. Dodecyl glycidyl ether (DDGE) is copolymerized with CO2 and propylene oxide (PO) to obtain aliphatic poly(dodecyl glycidyl ether carbonate) and poly(propylene carbonate-co-dodecyl glycidyl ether carbonate) copolymers, respectively. The polymerization proceeds at 30 °C and high CO2 pressure utilizing the established binary catalytic system (R,R)-Co(salen)Cl/[PPN]Cl. The copolymers with varying DDGE:PO ratios are characterized via NMR, FT-IR spectroscopy, and SEC, exhibiting high molecular weight…
Simulation of first- and second-order transitions in asymmetric polymer mixtures
1993
The critical properties of dense asymmetric binary polymer mixtures are studied by grand canonical simulations within the framework of the 3-dimensional bond fluctuation lattice model. The monomers interact with each other via a potential ranging over the entire first peak of the pair distribution. An asymmetry is realized by giving the ratio of interactions λ = ∈AA/∈BB between monomers of the A-species and of the B-species a value different from 1. Using multiple histogram extrapolation techniques for the data analysis, the two phase region, which is a line of first-order transitions driven by the chemical potential difference, and the critical point are determined for a mixture of chains …
Cyclodextrins in polymer synthesis: Free radical polymerization of cyclodextrin complexes withN-methacryloyl-11-aminoundecanoic acid orN-methacryloyl…
1998
The hydrophobic monomers N-methacryloyl-11 -aminoundecanoic acid (1) or N-methacryloyl-1-aminononane (2) were incorporated as guests into the cavity of heptakis(2,6-di-O-methyl)-β-cyclodextrin (Me 2 -β-CD) as a host, yielding the water compatible monomers N-methacryloyl-l 11-aminoundecanoic acid/ Me 2 -β-CD-complex (1a) and N-methacryloyl-1 -aminononane/Me 2 -β-Cl complex (2a). These complexes were polymerized radically in aqueous medium. The resulting polymers 1b and 2b which were obtained from the complexes 1a and 2a, are insoluble in water because of the unthreading of the cyclodextrin during the polymerization. The polymerization rate of 1a and 2a is high in comparison to the rate of th…
Cyclodextrins in polymer synthesis: free radical polymerisation of cyclodextrin complexes of cyclohexyl and phenyl methacrylate in aqueous medium
1998
The polymerisation mechanism of 2,6-dimethyl-β-cyclodextrin (Me2-β-CD) complexes of phenyl methacrylate (1) and cyclohexyl methacrylate (2) is described. The polymerisation of the complexes 1 a and 2a was carried out in water with potassium peroxodisulfate/potassium hydrogensulfite as initiator. The unthreading of the Me2-β-CD during the polymerisation led to water-insoluble poly(phenyl methacrylate) (1b) and poly(cyclohexyl methacrylate) (2b). By comparison, analogously prepared polymers from uncomplexed monomers 1 and 2 in homogeneous organic solvent (THF) with AIBN as radical initiator showed significantly lower viscosities and were obtained in lower yields in both cases.
Cyclodextrins in polymer synthesis: Free radical polymerization of methylated β-cyclodextrin complexes of methyl methacrylate and styrene, controlled…
2000
Methylated β-cyclodextrin (me-β-CD) was used to complex the hydrophobic monomers methyl methacrylate (1) or styrene (2) yielding the water-soluble 1 : 1-host/guest complexes methyl methacrylate/me-β-CD (1 a) and styrene/me-β-CD (2 a), respectively. In addition, the hydrophobic chain-transfer agent dodecanethiol (3) was complexed by two equivalents of me-β-CD yielding the water-soluble dodecanethiol/me-β-CD (3 a). The included monomers were polymerized in water by a free-radical mechanism in the presence of 3 a as the chain-transfer agent. The chain-transfer constants were determined. In order to evaluate these results, the chain-transfer constants of 3 were also determined in the case of th…
Cyclodextrins in Polymer Synthesis: Synthesis and Influence of Methylatedβ-Cyclodextrin on the Radical Polymerization Behavior of 1,1-Disubstituted 2…
2001
The chemical and enzymatic hydrolyses of 1,1-diethoxycarbonyl-2-vinylcyclopropane (1) were investigated. The product of the pig liver esterase (PLE)-catalyzed hydrolysis of 1 is a chiral trans monoester of 2-vinylcyclopropane dicarboxylic acid. New 1,1-disubstituted 2-vinylcyclopropane monomers (2a, b) were synthesized by the esterification of this ester. Methylated β-cyclodextrin was used to complex monomers 2a, b, yielding water-soluble 1 : 1 host/guest complexes. These complexes were polymerized in aqueous media by a free-radical ring-opening mechanism.
Microstructure and lateral diffusion in monolayers of polymerizable amphiphiles
1989
Lipid analogue amphiphilic molecules containing polymerizable units were investigated in monolayers at the air/water interface by using film balance measurements, fluorescence microscopy, and photobleaching techniques. The polymerizable groups (diene-, diyne-, and methacrylate units) were introduced into the hydrophobic alkyl chains or into the polar head of the amphiphilic molecules. In the case of the diene- and diyne-containing compounds the polymerizable units are incorporated into the hydrophobic alkyl chains, enabling them to form a two-dimensional network. Due to the free chain flexibility of the monomers the lateral mobility was comparable to that of saturated lipid analogues and de…
Ferrocenyl Glycidyl Ether: A Versatile Ferrocene Monomer for Copolymerization with Ethylene Oxide to Water-Soluble, Thermoresponsive Copolymers
2013
The first ferrocene-containing epoxide monomer, ferrocenyl glycidyl ether (fcGE), is introduced. The monomer has been copolymerized with ethylene oxide (EO). This leads to electroactive, water-soluble, and thermoresponsive poly(ethylene glycol) (PEG) derived copolyethers. Anionic homo- and copolymerization of fcGE with EO was possible. Molecular weights could be varied from 2000 to 10 000 g mol–1, resulting in polymers with narrow molecular weight distribution (Mw/Mn = 1.07–1.20). The ferrocene (fc) content was varied from 3 to 30 mol %, obtaining water-soluble materials up to 10 mol % incorporation of the apolar ferrocenyl comonomer. Despite the steric bulk of fcGE, random copolymers were …
Double-Hydrophilic Linear-Hyperbranched Block Copolymers Based on Poly(ethylene oxide) and Poly(glycerol)
2008
A convenient 4-step (2-pot) approach for the synthesis of biocompatible, double hydrophilic linear-hyperbranched block copolymers based on poly(ethylene oxide) (PEO) and poly(glycerol) (PG) is described. The polymers consisting exclusively of an aliphatic polyether structure were prepared from linear PEO-b-(l-PG) precursor block copolymers, obtained via anionic polymerization of ethylene oxide and subsequently ethoxyethyl glycidyl ether (EEGE). In order to generate initiating functionalities for glycidol, the protected hydroxyl groups of the P(EEGE) block were recovered by hydrolysis with hydrochloric acid. Partial deprotonation of the linear poly(glycerol) block with cesium hydroxide permi…
“Clickable PEG” via anionic copolymerization of ethylene oxide and glycidyl propargyl ether
2017
A straight forward synthesis of poly(ethylene glycol) (PEG) with multiple alkyne groups distributed along the polymer chain is introduced. Direct access to clickable PEG is achieved by the monomer-activated anionic ring-opening copolymerization (AROP) of ethylene oxide (EO) with glycidyl propargyl ether (GPgE). Notably for successful polymerization no protection of the alkyne unit is required owing to the mild reaction conditions. Defined PEG-co-PGPgE and PGPgE (co)polymers with PDIs of 1.18–1.60 and molecular weights of Mn = 3000–9500 g mol−1 were prepared. In situ1H NMR kinetic studies revealed remarkably disparate reactivity ratios of rEO = 14.8 and rGPgE = 0.076, representing a pronounc…