Search results for "Montmorillonite"
showing 10 items of 98 documents
Elasticity and long-term behavior of recycled polyethylene terephthalate (rPET)/montmorillonite (MMT) composites
2014
Abstract Recycled polyethylene terephthalate (rPET) nanocomposites with various amounts of montmorillonite clay (MMT) have been manufactured by using twin screw extrusion. By rising MMT weight content Wf up to 1 wt.% it is possible to increase yield strength and ultimate strength of the composite by 17% and 27% respectively in comparison to neat rPET. Introduction of MMT in the rPET leads also to considerable increase of the modulus of elasticity E. Relationship E(Wf), however, is non-linear and is characterized by slow-down in E growth along with increasing MMT content. At low nanofiller content experimental results are sufficiently well described by using the method of Mori–Tanaka and the…
Compatibilized Polyamide 6/Polyethylene Blends Clay Nanocomposites: Effect of the Degradation and Stabilization of the Clay Modifier
2008
Abstract Blends of polyamide 6 (PA6) and high-density polyethylene (HDPE) were compatibilized using an already investigated method and a sample of Cloisite 15A, a montmorillonite modified with ammonium quaternary salts was added. The blends were prepared in a twin screw extruder and characterized from a morphological, rheological and mechanical point of view. The results indicated that, despite a good morphology achieved in the filled blends and a moderate intercalation of the clay, the mechanical properties are far from being good, especially the ultimate properties. In order to investigate the possible influence of the inhibition of the crystallization and of the degradation of the organi…
Synthesis and Properties of Amine-Cured Epoxy/Organophilic Layered Silicate Nanocomposites
2009
Epoxy-layered silicate composites have been prepared by dispersing an organically modified montmorillonite (Nanofil 919) in an epoxy resin and curing in the presence of an aromatic hardener. Dispersion of the layered silicate within the epoxy matrix was verified using X-ray diffraction and transmission electron microscopy revealing that interaction improves upon organic silicate modification. Flexural properties and toughness increase with the organic silicate loading whereas glass transition temperature decreases and thermal stability remains practically unmodified.
The role of organoclay and matrix type in photo-oxidation of polyolefin/clay nanocomposite films
2009
Abstract In this paper the photo-oxidation behaviour of polyolefin/clay nanocomposite films was studied; in particular, the effect of the amount of organo-modifier and the matrix polarity on the photo-oxidation was investigated. Two different organo-modified clays and compositions of LDPE/EVA blend films were used and the photo-oxidation was followed by mechanical and spectroscopic analyses. The organoclay and matrix type strongly influence the photo-oxidative behaviour of nanocomposite films. The films filled with CL15A show a faster loss of mechanical performance and higher carbonyl formation with respect to the films filled with the CL20A. Additionally, the LDPE based nanocomposite under…
Morphology and Properties of Polyethylene/Clay Nanocomposite Drawn Fibers
2008
The influence of an elongational flow on the morphology of PE/clay nanocomposite drawn fibers was studied. An increase of the elastic modulus and the tensile strength as well as a decrease of the elongation at break are observed with increasing draw ratio. The applied elongational gradient orients the polymer chains and the clay particles along the spinning direction. When the applied flow results in the formation and the orientation of exfoliated nanoparticles, a pronounced increase of the mechanical properties is observed. The dispersed clay particles can be broken and oriented by the extensional flow, which might indicate a flow induced intercalated/exfoliated morphology transition.
Preparation and characterization of polyamide 6/polyethylene blend-clay nanocomposites in the presence of compatibilisers and stabilizing system
2010
Abstract Several compatibilising systems were added to high-density polyethylene (HDPE) and polyamide 6 (PA6) blends in the presence of an organically modified montmorillonite (OMM). All the blends were prepared by using a co-rotating twin-screw extruder and characterized by SEM, TEM and XRD analyses. In addition, the rheological behaviour and the mechanical properties – tensile and impact – were evaluated. The presence of OMM affects the dimensions of the polymeric phases in the blend but not their mutual adhesion, granted only by the compatibilisers. TEM, SEM and XRD analyses indicated that there is a strict correlation between the compatibilisation level and the final interlayer distance…
Rheological Response of Polyethylene/Clay Nanocomposites to Annealing Treatment
2007
The rheological response of a polyethylene/clay nanocomposite to annealing treatment under air and nitrogen atmospheres was studied. The treatment influences the rheology of the nanocomposite significantly. In particular, the viscosity and the non-Newtonian behavior dramatically increase with annealing time, and a liquid-like/solid-like transition is observed. The annealed samples were characterized by ATR-FT-IR spectrometry and it was shown that a silicate-rich layer is formed on the surface of the nanocomposite. This result was confirmed by TEM images of bulk and surface of annealed samples. It was demonstrated that the formation of this coating is the main cause of the change of rheologi…
Recycled Polycarbonate Blend as Matrix for Development of Polymer Nanocomposite
2012
Summary: Secondary polycarbonate (SPC) is modified with various amounts (5, 10, 30 wt%) of ethylene vinyl acetate copolymer (EVAc) in order to reduce its brittleness. It is observed that at optimal EVAc weight content maximum tensile strength σM and impact strength AI increse by 14% (ωEVAc = 5 wt%) and 450% (ωEVAc = 10 wt%) in comparison to neat SPC, respectively. Addition of montmorillonite nanoclay (MMT) allowed further increase of elastic modulus E, strength and creep resistance of the investigated SPC blend with 10 wt% of EVAc.
Viscoelastic behavior of epoxy prepolymer/organophilic montmorillonite dispersions
2008
Dispersions of a bisphenol A-based epoxy resin with an organophilic montmorillonite (Nanofil 919) were studied by X-ray diffraction and oscillatory shear rheometry. X-ray studies reveal that the clay is intercalated by the epoxy and forms stable dispersions. The viscoelastic behavior of the nanodispersions was measured as a function of the Nanofil concentration and temperature. An increase in both G′ and G″ moduli was detected as the concentration increases. Furthermore, a transition from a liquid-like behavior, at low temperatures, to a solid-like behavior, at higher temperatures, was observed for all the samples. This transition is accounted for the formation of a percolated structure of …
Effect of a new amido‐imidazolium compound as a clay modifier on properties of polypropylene composites
2021
Halloysite nanotubes (HNT) and montmorillonite (Mt) were modified by a novel, dicarboxylic fatty acid substituted amido-imidazolium chloride. It was found that the modification process of the clays by the imidazolium compound improved their dispersion in the polymer matrix, while HNT were a more beneficial filler of PP than Mt. PP/imidazolium modified HNT composites (PP/HNT-M) showed significant increase in thermo-oxidative stability, flexibility, and toughness, combined with a slight reduction in stiffness, as well as a lack of changes in crystallinity and strength, compared with neat PP. These effects were not observed for PP/Mt composites. The formation of strong interactions between the…