Search results for "NANOCOMPOSITE"
showing 10 items of 641 documents
Nanostructured metal/oxide coatings
2007
Al based nanocomposite coatings on Cu and glass substrates were obtained in the conditions of severe shear stresses by deformation scheme similar to that of friction. Structure, composition and micromechanical properties were investigated using AFM, XRD, SIMS, electron, optical microscopy and precision microindentation techniques. Coatings are characterized by the high microhardness and good adhesion to the substrates. This is determined by the formation of nanostructured Al-oxide composite stabilized by the presence of oxidized interlayers, which are barriers for the grain growth and intermetallic phase formation. The annealing in vacuum leads to the development of oxygen redistribution pr…
Growth and size distribution of Au nanoparticles in annealed Au/TiO2 thin films
2014
Abstract Nanocomposites consisting of noble metal nanoparticles (NPs) embedded in TiO2 thin films are of great interest for applications in optoelectronics, photocatalysis and solar-cells for which the plasmonic properties of the metal NPs play a major role. This work investigates the first stages of the formation of gold NPs by thermal annealing of Au-doped TiO2 thin films grown by magnetron sputtering. A low concentration of gold in the films is considered (5 at.%) in order to study the first stages of the formation of the NPs. Raman spectroscopy is used to follow the crystallization of TiO2 when increasing the annealing temperature. In addition, low-frequency Raman scattering (LFRS) is u…
Bond strength of dental nanocomposites repaired with a bulkfill composite
2017
Background The aim of this study was to analyze the bond strength of aged resin based nanocomposites repaired with the same and bulk fill composites. Material and Methods Seventy-two disc shaped resin composites consisted of three different nanocomposite resins (Filtek Ultimate/FU, Herculite XRV Ultra/HXRV, and Reflectys/R) were produced. After storing the samples for 8 weeks in distilled water, each material was combined with the same material or the bulk-fill composite resin system (Filtek Ultimate+Filtek Ultimate/Group-1; Filtek Ultimate+Tetric BF/Group-2; Herculite XRV+Herculite XRV/Group-3; Herculite XRV+Tetric BF/ Group-4; Reflectys+Reflectys/Group 5; Reflectys+Tetric BF/Group-6), for…
Parameters influencing the stiffness of composites reinforced by carbon nanotubes – A numerical–analytical approach
2014
Abstract Due to their high stiffness and strength, as well as their electrical conductivity, carbon nanotubes are under intense investigation as fillers in polymer matrix composites. The nature of the carbon nanotube/polymer bonding and the curvature of the carbon nanotubes may strongly reduce the reinforcing effect of the carbon nanotubes when added to a matrix to create composites. Here the effects of carbon nanotube waviness and the interaction with the matrix on the stiffness of the composite are investigated. Using a mixed numerical–analytical model, a parametric study of the waviness and volume fraction influence of CNTs on the elastic behavior of the nanocomposite is presented. The m…
Multifunctional properties of nanocomposites made by 1D and 2D graphene based fillers
2015
High aspect ratio graphene based fillers with different dimensionalities showed the ability to greatly modify rheological, mechanical, thermal and electrical properties of polymers at very low content. In this work, the effect of filler dimensionality on the multifunctional properties of an epoxy matrix reinforced by both carbon nanotubes (1D) and graphite nanoplatelets (2D) have been investigated across the percolation region. Keywords-- Carbon nanotube, Graphite nanoplatelet, nanocomposites, mechanical properties, ...
Au@MnO nanoflowers: hybrid nanocomposites for selective dual functionalization and imaging.
2010
Recently, the development of hybrid nanostructures consisting of various materials has attracted considerable interest. The assembly of different nanomaterials with specific optical, magnetic, or electronic properties to multicomponent composites can change and even enhance the properties of the individual constituents. Specifically tuning the structure and interface interactions within the nanocomposites has resulted in novel platforms of materials that may lead the way to various future technologies, such as synchronous biolabeling, protein separation and detection, heterogeneous catalysis, and multimodal imaging in biomedicine. Of the various kinds of nanomaterials, gold nanorods show an…
Green Nanocomposites-Based on PLA and Natural Organic Fillers
2017
Over the past decades, many efforts have been carried out for the development of novel green nanocomposites based on biopolymers and natural organic nanofillers. Indeed, these nanocomposites could replace some oil-derived polymers and thus helping to overcome environmental problems. In this regard, poly (lactic acid) (PLA) as matrix and polysaccharide nanocrystals (cellulose, chitin, and starch) as bio-based nanoreinforcements are the most promising components to obtain high-performance green nanocomposites. This chapter covers the basic features of PLA and polysaccharide nanocrystals derived from biomass-based raw materials such as cellulose, chitin, and starch. In particular, this chapter…
Stable anchoring of dispersed gold nanoparticles on hierarchic porous silica-based materials
2010
The nanometric organization of MOx (M = Co, Zn, Ni) domains partially embedded inside the mesoporous silica walls but accessible to the pore voids, which is achieved through a simple one-pot surfactant-assisted procedure, define optimal anchors for the nucleation and growth of gold nanoparticles, which in turn favours an exceptional thermal stability for the final Au-supported materials. As silica support we have selected a UVM-7 silica having a highly accessible architecture defined by two hierarchic pore systems. The combination of nanometric pore length, tortuous mesopores and MOx inorganic anchors favours the stability of the final Au/CoOx-UVM-7 nanocomposites.
Elasticity and long-term behavior of recycled polyethylene terephthalate (rPET)/montmorillonite (MMT) composites
2014
Abstract Recycled polyethylene terephthalate (rPET) nanocomposites with various amounts of montmorillonite clay (MMT) have been manufactured by using twin screw extrusion. By rising MMT weight content Wf up to 1 wt.% it is possible to increase yield strength and ultimate strength of the composite by 17% and 27% respectively in comparison to neat rPET. Introduction of MMT in the rPET leads also to considerable increase of the modulus of elasticity E. Relationship E(Wf), however, is non-linear and is characterized by slow-down in E growth along with increasing MMT content. At low nanofiller content experimental results are sufficiently well described by using the method of Mori–Tanaka and the…
Ag nanoparticles agargel nanocomposites for SERS detection of cultural heritage interest pigments
2018
Agarose gel (agargel) composites with commercial and laboratory made silver nanoparticles were prepared by a wet solution method at room temperature. The gel composites were used for pigment extraction and detection by Raman spectroscopy. Red (alizarin) and violet (crystal violet) pigments deposited on paper were extracted by the composites and were investigated by micro-Raman spectroscopy. Evaluation was carried out of the surface-enhanced Raman spectroscopy (SERS) effect induced by the silver nanoparticles embedded in the gel. A kinetic approach as a function of time was used to determine the efficiency of pigments extraction by composites deposition. A non-invasive extraction process of …