Search results for "NANOCOMPOSITE"
showing 10 items of 641 documents
The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA
2012
Abstract Silica–PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), 13 C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy ( 13 C{ 1 H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame ( T 1 ρ ( H )), in the laboratory frame ( T 1 ( H )) a…
Effects of organoclay on morphology and properties of nanocomposites based on LDPE/PA-6 blends without and with SEBS-g-MA compatibilizer
2009
LDPE/PA-6 blends (75/25 wt/wt) were added with SEBS-g-MA (S) and/or an organoclay (20A) using different compounding sequences and the morphology and the properties of the blends or composites were investigated. An XRD study of the nanocomposites with pure polymers showed that 20A is intercalated by LDPE or PA-6 chains, whereas it is exfoliated by S if the clay concentration does not exceed 10 wt%. The SEM investigation showed that both S and 20A behave as efficient emulsifying agents for the LDPE/PA-6 blends. However, their effect on the mechanical properties was found to be opposite: S enhanced toughness but lowered the stiffness, whereas 20A improved the elastic modulus but impaired the i…
Localized surface plasmon resonance sensor based on Ag-PVA nanocomposite thin films
2009
In this work we demonstrate the use of nanocomposite thin films of poly(vinyl alcohol) with embedded silver NPs for chemosensing purposes. Silver NPs are in situ synthesized inside polyvinyl alcohol during the bake step of the formation of a nanocomposite thin film. The polymer in the nanocomposite provides an appropriate chemical and electromagnetic environment for metal NPs in order to interact with and hence detect the chemical species. A limit of detection below 20 nM is found when detecting 2-mercaptoethanol as the analyte, when measuring spectral changes (peak wavelength, linewidth and intensity) in the Localized Surface Plasmon Resonance. Potential qualitative and semi-quantitative s…
The Effect of Montmorillonite Type Nanoparticles on Stiffness and Flammability of Rapeseed Oil Based Polyisocyanurate Foams
2013
Polyisocyanurate foams incorporating polyols derived from rapeseed oil are developed, with the polyol system comprising up to 80% of rapeseed oil esters. To enhance the mechanical characteristics and fire resistance of the foams, they are filled with three different types of organically modified clay (organoclay) in the range of loading from 1 to 5% by weight. Marked increase in tensile stiffness of nanocomposite foams is observed.
The Role of Elongational Flow in Morphology Modification of Polyethylene/OMMt Nanocomposite System
2011
The formulation of high-performance polymer based nanocomposites depend on many factors, such as polymeric matrix type, nanoparticle type, loading and morphology, affinity between the polymeric matrix and nanoparticles, presence of compatibilizer and processing conditions [1-4]. During the industrial processing the polymer based systems are subjected to two different processing flows, i.e. the shear and elongational flow. The shear flow plays a significant role in polyethylene/OMMt manufacture processing but it is not able to change the system morphology, while, the elongational flow, involved in spinning and film-blowing processing operations, can induce considerably clay morphology variat…
Generalized synthesis of periodic surfactant/inorganic composite materials
1994
THE recent synthesis of silica-based mesoporous materials1,2 by the cooperative assembly of periodic inorganic and surfactant-based structures has attracted great interest because it extends the range of molecular-sieve materials into the very-large-pore regime. If the synthetic approach can be generalized to transition-metal oxide mesostructures, the resulting nanocomposite materials might find applications in electrochromic or solid-electrolyte devices3,4, as high-surface-area redox catalysts5 and as substrates for biochemical separations. We have proposed recently6 that the matching of charge density at the surfactant/inorganic interfaces governs the assembly process; such co-organizatio…
Functionalization of P3HT with Various Mono- and Multidentate Anchor Groups
2018
Due to its favorable optoelectronic properties and the accessibility via Grignard metathesis (GRIM) polymerization, poly(3-hexylthiophene) (P3HT) is one of the most applied conjugated polymers. The ‘living' nature of GRIM polymerization enables the modification of the polymer and the installation of desired properties. In the present study, two versatile approaches for the synthesis of anchor group-modified P3HT have been developed, which enable the functionalization of various inorganic nanoparticles. Depending on the polymerization conditions, mono- and bifunctional ethynyl-terminated P3HT or solely monofunctionalized aldehyde-terminated P3HT was synthesized. Afterwards, the quantitative …
Influence of Nanoclay Additive on Mechanical Properties of Bio-Based Polyurethane Nanocomposites
2013
This paper is about investigation of the bio-based polyurethanes from the rapeseed oil polyols and their modification with montmorillonite nanoparticles. The results of hardness and tensile properties investigation of polyurethane / montmorillonite nanocomposites are presented.
Nanocomposite, an innovative route to large structure and infrastructure protection. A case of study: CNT-doped polyurea
2010
<p>In this work we focus on experimental studies of polymer-nanocomposites intended for passive protection of civil structures. The material consists of a polyurea-matrix enhanced by different quantities of multiwalled carbon nanotubes. Several tensile and cyclic tests are performed to evaluate and characterize the mechanical behaviour of this new material. Furthermore, we subject the material to accelerated thermal aging and study its performance deterioration which is fairly unknown. The results on the unaged specimens are intuitive and indicate that an arbitrary amount of CNTs may result in suboptimal performance. More specifically, 1% in weight of CNTs yields the best mechanical p…
Manufacturing, structure and properties of recycled polyethylene terephthalate /liquid crystal polymer/montmorillonite clay nanocomposites
2013
Polyethylene terephthalate (PET)/liquid crystal polymer (LCP)/monthmorillonite clay (MMT) compositions were obtained by melt mixing. Their mechanical, structural, rheological and thermal properties were investigated.