Search results for "NANOWIRE"
showing 10 items of 382 documents
Structural characterization of one-dimensional ZnO-based nanostructures grown by MOCVD
2010
Various one-dimensional (1D) ZnO-based nanostructures, including ZnO nano-wires (NWs) grown using vapour-liquid-solid (VLS) process, ZnO/ZnSe core/shell, nitrogen-doped ZnO and ZnMgO NWs were grown by metalorganic chemical vapour deposition (MOCVD). Transmission electron microscopy (TEM) analysis is presented. For all the samples, a high crystalline quality is observed. Some features are emphasized such as the gold contamination of ZnO wires grown under the metal droplets in the VLS process. It is concluded that MOCVD is a suitable technique for the realization of original ZnO nanodevices.
Combustion Formation of Novel Nanomaterials: Synthesis and Cathodoluminescence of Silicon Carbide Nanowires
2009
This paper presents the combustion synthesis and characterization of one-dimensional silicon carbide nanostructures (nanowires of 3C-SiC polytype with zincblend structure) by means of cathodoluminescence technique. Cathodoluminescence spectra of nano-SiC samples and, as a reference, of a commercially available SiC micropowder are compared. It is shown that the emission band at 1.97 eV which is slightly evidenced in the spectrum of the commercial SiC under 10 keV electron beam irradiation becomes the prevailing band in CL of the purified silicon carbide nanowires.
Growth and characterization of PbI2-decorated ZnO nanowires for photodetection applications
2020
Financial support provided by Scientific Research Project for Students and Young Researchers Nr. SJZ/2017/1 realized at the Institute of Solid State Physics, University of Latvia is greatly acknowledged. The authors are grateful to Liga Bikse for XRD measurements.
Nanostructured Material Fabrication for Energy Conversion
2011
The electrochemical deposition is a suitable via to fabricate nanostructured materials for energy conversion, and for other purposes. This paper deals with the electrochemical synthesis of nanostructured alloys and ruthenium oxide, which can be used in Li-ion batteries and polymer electrolyte membrane electrolyzers.
Synthesis and characterization of highly ordered cobalt-magnetite nanocable arrays.
2006
Magnetically tunable, high-density arrays of coaxial nanocables within anodic aluminum oxide (AAO) membranes have been synthesized. The nanocables consist of magnetite nanowires surrounded by cobalt nanotube sheaths and cobalt nanowires surrounded by magnetite nanotube sheaths. These materials are a combination of separate hard (Co) and soft (Fe3O4) magnetic materials in a single nanocable structure. The combination of two or more magnetic materials in such a radial structure is seen as a very powerful tool for the future fabrication of magnetoresistive, spin-valve and ultrafast spin-injection devices with nonplanar geometries. The nanocable arrays were prepared using a supercritical-fluid …
Cerium oxyhydroxide nanowire growth via electrogeneration of base in nonaqueous electrolytes
2008
The preparation of compact cerium oxyhydroxide nanowires into anodic alumina membranes from cerium chloride in ethanol solution via electrogeneration of base is reported. Scanning electron microscopy analyses indicate that dense, well-aligned, and highly ordered nanowires can be formed in a wide range of applied potentials and current densities in alcoholic solution. The employment of water brings to a hybrid nanotube/nanowire structure, suggesting a key role of the electrolyte nature in determining the morphology of the deposit. Electrochemical findings and X-ray diffraction analysis have shown that nanowires are constituted by a Ce(III)/Ce(IV) oxyhydroxide that can be completely oxidized …
Probing the magnetic properties of cobalt–germanium nanocable arrays
2005
We report the synthesis of high density arrays of coaxial nanocables, consisting of germanium nanowires surrounded by cobalt nanotube sheaths, within anodic aluminium oxide membranes. The nanocable arrays were prepared using a supercritical fluid inclusion process, whereby the cobalt nanotubes were first deposited on the pore walls of the nanoporous membranes and subsequently filled with germanium to form coaxial nanocables. The composition and structure of the metal–semiconductor nanostructures was investigated by electron microscopy, energy dispersive X-ray mapping and X-ray diffraction at high angles. The magnetic properties of the co-axial nanocables were probed using a superconducting …
Influence of electrodeposition techniques on Ni nanostructures
2008
Abstract Different Ni nanostructure arrays were fabricated by pulsed electrodeposition from a Watts bath inside the pores of anodic alumina membrane (AAM) templates. Under a trapezoidal waveform of potential, consisting of fast linear sweeps between 0 and −3 V (SCE) interleaved by delay times at 0 (10 s) and −3 V (0.1 s), Ni nanowires were grown. The rate of nanowires growth was constant up to 60 min of deposition. For longer times, the growth of nanowires was not uniform, and after about 180 min some nanowires reached the template surface exposed to the electrolyte. Under square potential pulses between the same potentials (pulse length 1 s), nanotubes of Ni are obtained. Morphological ana…
A direct comparison of 2D versus 3D diffusion analysis at nanowire electrodes: A finite element analysis and experimental study
2022
In electroanalysis, the benefits accrued by miniaturisation are a key driver in sensor development. Finite element simulations of electrochemical processes occurring at ultramicro- and nano-electrodes are used to provide key insight into experimental design in relation to diffusion profiles and expected currents. The most commonly used method, the diffusion domain approach (DDA) offers a means of reducing a three dimensional design to two dimensions to ease computational demands. However, the DDA approach can be limited when using basic assumptions which can be incorrect, for example that all electrodes in an array are equivalent. Consequently, to get a more realistic view of molecular diff…
The generalized plane piezoelectric problem: Theoretical formulation and application to heterostructure nanowires
2016
We present a systematic methodology for the reformulation of a broad class of three-dimensional (3D) piezoelectric problems into a two-dimensional (2D) mathematical form. The sole underlying hypothesis is that the system geometry and material properties as well as the applied loads (forces and charges) and boundary conditions are translationally invariant along some direction. This class of problems is commonly denoted here as the generalized plane piezoelectric (GPP) problem. The first advantage of the generalized plane problems is that they are more manageable from both analytical and computational points of view. Moreover, they are flexible enough to accommodate any geometric cross secti…